Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <54980c40-f49c-c895-591d-c2d9626c3fc0@linaro.org>
Date:   Thu, 15 Dec 2022 13:59:14 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.6.0
Subject: Re: [PATCH v2 1/3] arm64: dts: qcom: pm8450a: add rtc node
Content-Language: en-US
To:     Eric Chanudet <echanude@redhat.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Andrew Halaney <ahalaney@redhat.com>,
        Brian Masney <bmasney@redhat.com>
References: <20221214210908.1788284-1-echanude@redhat.com>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20221214210908.1788284-1-echanude@redhat.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 14.12.2022 22:09, Eric Chanudet wrote:
> Add the rtc block on pm8450a first pmic to enable the rtc for
> sa8540p-ride.
> 
> Signed-off-by: Eric Chanudet <echanude@redhat.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/pm8450a.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8450a.dtsi b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> index 34fc72896761..c9b8da43b237 100644
> --- a/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> @@ -13,6 +13,14 @@ pm8450a: pmic@0 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		rtc@6000 {
> +			compatible = "qcom,pm8941-rtc";
> +			reg = <0x6000>, <0x6100>;
> +			reg-names = "rtc", "alarm";
> +			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
> +			wakeup-source;
> +		};
> +
>  		pm8450a_gpios: gpio@c000 {
>  			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;