Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Lux Aliaga <they@mint.lgbt>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     Lux Aliaga <they@mint.lgbt>, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/4] arm64: dts: qcom: sm6125: Add UFS nodes
Date:   Thu, 15 Dec 2022 13:12:55 -0300
Message-Id: <20221215161258.355962-2-they@mint.lgbt>
In-Reply-To: <20221215161258.355962-1-they@mint.lgbt>
References: <20221215161258.355962-1-they@mint.lgbt>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Adds a UFS host controller node and its corresponding PHY to
the sm6125 platform.

Signed-off-by: Lux Aliaga <they@mint.lgbt>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 66 ++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/q=
com/sm6125.dtsi
index 7e25a4f85594..6d4534c7a2fe 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -508,6 +508,72 @@ sdhc_2: mmc@4784000 {
 			status =3D "disabled";
 		};
=20
+		ufs_mem_hc: ufs@4804000 {
+			compatible =3D "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg =3D <0x04804000 0x3000>, <0x04810000 0x8000>;
+			reg-names =3D "std", "ice";
+			interrupts =3D <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			phys =3D <&ufs_mem_phy_lanes>;
+			phy-names =3D "ufsphy";
+			lanes-per-direction =3D <1>;
+			#reset-cells =3D <1>;
+			resets =3D <&gcc GCC_UFS_PHY_BCR>;
+			reset-names =3D "rst";
+
+			clock-names =3D "core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"ice_core_clk";
+			clocks =3D <&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmcc RPM_SMD_XO_CLK_SRC>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			freq-table-hz =3D <50000000 240000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>;
+
+			non-removable;
+			status =3D "disabled";
+		};
+
+		ufs_mem_phy: phy@4807000 {
+			compatible =3D "qcom,sm6115-qmp-ufs-phy";
+			reg =3D <0x04807000 0x1c4>;
+			#address-cells =3D <1>;
+			#size-cells =3D <1>;
+			ranges;
+
+			power-domains =3D <&gcc UFS_PHY_GDSC>;
+
+			clock-names =3D "ref", "ref_aux";
+			clocks =3D <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+					 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets =3D <&ufs_mem_hc 0>;
+			reset-names =3D "ufsphy";
+			status =3D "disabled";
+
+			ufs_mem_phy_lanes: lanes@4807400 {
+				reg =3D <0x4807400 0x098>,
+				      <0x4807600 0x130>,
+				      <0x4807c00 0x16c>;
+				#phy-cells =3D <0>;
+			};
+		};
+
 		usb3: usb@4ef8800 {
 			compatible =3D "qcom,sm6125-dwc3", "qcom,dwc3";
 			reg =3D <0x04ef8800 0x400>;
--=20
2.38.1