Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <fd8b7bbb-088c-59ce-2b2a-c6c9edb3f1af@linaro.org>
Date:   Thu, 15 Dec 2022 20:47:46 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.5.1
Subject: Re: [PATCH v4 2/2] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
Content-Language: en-GB
To:     Melody Olvera <quic_molvera@quicinc.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Bjorn Andersson <andersson@kernel.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20221118192241.29384-1-quic_molvera@quicinc.com>
 <20221118192241.29384-3-quic_molvera@quicinc.com>
 <20221202033721.4slwz2utw5u6rv7b@builder.lan>
 <9e4e6149-bc24-b727-fff7-3fb7038fc066@quicinc.com>
 <5cd9e71c-8147-2ce1-b137-0342e271031b@linaro.org>
 <82620abd-105a-6ebc-ae58-e77fa058852b@quicinc.com>
From:   Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In-Reply-To: <82620abd-105a-6ebc-ae58-e77fa058852b@quicinc.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 15/12/2022 19:56, Melody Olvera wrote:
> 
> 
> On 12/15/2022 12:44 AM, Krzysztof Kozlowski wrote:
>> On 14/12/2022 19:59, Melody Olvera wrote:
>>>>> +			#clock-cells = <0>;
>>>>> +		};
>>>>> +
>>>>> +		sleep_clk: sleep-clk {
>>>>> +			compatible = "fixed-clock";
>>>>> +			clock-frequency = <32000>;
>>>>> +			#clock-cells = <0>;
>>>>> +		};
>>>>> +
>>>>> +		pcie_0_pipe_clk: pcie-0-pipe-clk {
>>>> Afaict these clocks are not referenced anywhere, so please skip them.
>>> Yes, so I included them to be consistent with the bindings. They will be needed later;
>>> should I still remove?
>>>
>> If they are not referenced anywhere, how is it consistent with bindings?
>> Where do the bindings require defining such nodes?
> 
> These bindings here: https://lore.kernel.org/all/20221118181826.28269-2-quic_molvera@quicinc.com/
> I believe you commented that we either have these clocks or we don't, correct? I added them to
> the dt since these clocks exist and will be needed later when USB and PCIE nodes are added.
> As Konrad noted, these technically belong in the PHYs, but I was told to put stub fixed
> clocks instead here: https://lore.kernel.org/lkml/2c8c4642-8aee-3da3-7698-5e08b4c5894d@linaro.org/
> 
> How is this to be handled? Should I remove the clocks from the dt and the bindings and add them
> later when we need them? Do I leave stub clocks here with frequency 0 until needed? I am
> very confused right now.

You were told to use stub clocks in the bindings, not in the dtsi file. 
You can use <0> in the dtsi instead.

> 
> Thanks,
> Melody
> 
>>
>> Best regards,
>> Krzysztof
>>
> 

-- 
With best wishes
Dmitry