Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <c5b8c9d1-6391-fb76-c380-6f0fdb3cc878@linaro.org>
Date:   Sun, 18 Dec 2022 19:42:22 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.6.0
Subject: Re: [PATCH V2 2/2] arm64: dts: imx: Introduce imx8mp-beacon-kit
To:     Adam Ford <aford173@gmail.com>,
        linux-arm-kernel@lists.infradead.org
Cc:     aford@beaconembedded.com, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Li Yang <leoyang.li@nxp.com>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20221217234340.819752-1-aford173@gmail.com>
 <20221217234340.819752-2-aford173@gmail.com>
Content-Language: en-US
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20221217234340.819752-2-aford173@gmail.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 18/12/2022 00:43, Adam Ford wrote:
> Beacon Embedded has an i.MX8M Plus development kit which consists
> of a SOM + baseboard.  The SOM includes Bluetooth, WiFi, QSPI, eMMC,
> and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual
> Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet
> PHY.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> V2:  Fix whitespace, remove dead nodes, and fix some node and
> parameter names to address errors in 'make dt_binding_check'

You still cannot check/test/build this DTS without Makefile.

> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> new file mode 100644
> index 000000000000..70399f2419cf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> @@ -0,0 +1,549 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Logic PD, Inc dba Beacon EmbeddedWorks
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/usb/pd.h>
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
> +#include "imx8mp.dtsi"
> +#include "imx8mp-beacon-som.dtsi"
> +
> +/ {
> +	model = "Beacon EmbeddedWorks i.MX8MPlus Development kit";
> +	compatible = "beacon,imx8mp-beacon-kit", "fsl,imx8mp";
> +
> +	aliases {
> +		ethernet0 = &eqos;
> +		ethernet1 = &fec;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart2;
> +	};
> +
> +	connector-1 {
> +		compatible = "usb-c-connector";
> +		label = "USB-C";
> +		data-role = "dual";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			port@0 {
> +				reg = <0>;
> +				hs_ep: endpoint {
> +					remote-endpoint = <&usb3_hs_ep>;
> +				};
> +			};
> +			port@1 {
> +				reg = <1>;
> +				ss_ep: endpoint {
> +					remote-endpoint = <&hd3ss3220_in_ep>;
> +				};
> +			};
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		autorepeat;
> +
> +		button-0 {
> +			label = "btn0";
> +			linux,code = <BTN_0>;
> +			gpios = <&pca6416_1 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +			wakeup-source;
> +		};
> +
> +		button-1 {
> +			label = "btn1";
> +			linux,code = <BTN_1>;
> +			gpios = <&pca6416_1 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +			wakeup-source;
> +		};
> +
> +		button-2 {
> +			label = "btn2";
> +			linux,code = <BTN_2>;
> +			gpios = <&pca6416_1 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +			wakeup-source;
> +		};
> +
> +		button-3 {
> +			label = "btn3";
> +			linux,code = <BTN_3>;
> +			gpios = <&pca6416_1 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led0 {

No improvements here.

> +			label = "gen_led0";
> +			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		led1 {
> +			label = "gen_led1";
> +			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		led2 {
> +			label = "gen_led2";
> +			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		led3 {
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_led3>;
> +			label = "heartbeat";
> +			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	pcie0_refclk: pcie0-refclk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <100000000>;
> +	};
> +
> +	reg_usdhc2_vmmc: regulator-usdhc2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VSD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		startup-delay-us = <100>;
> +		off-on-delay-us = <20000>;
> +	};
> +
> +	reg_usb1_host_vbus: regulator-usb1-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb1_host_vbus";
> +		regulator-max-microvolt = <5000000>;
> +		regulator-min-microvolt = <5000000>;
> +		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +};
> +
> +&ecspi2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi2>;
> +	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +
> +	tpm: tpm@0 {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_tpm>;
> +		compatible = "infineon,slb9670";
> +		reg = <0>;
> +		reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
> +		spi-max-frequency = <18500000>;
> +	};
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec>;
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethphy1>;
> +	phy-reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
> +	phy-reset-post-delay = <150>;
> +	phy-reset-duration = <10>;
> +	fsl,magic-packet;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy1: ethernet1-phy@3 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			reg = <3>;
> +		};
> +	};
> +};
> +
> +&flexcan1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	status = "okay";
> +};
> +
> +
> +&i2c2 {
> +	clock-frequency = <384000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	pca6416_3: gpio-i2c2@20 {

No improvements.

> +		compatible = "nxp,pcal6416";
> +		reg = <0x20>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +};
> +
> +&i2c3 {
> +	/* Connected to USB Hub */
> +	ptn5110: ptn5110@52 {

No improvements ... I'll stop reviewing. No point if you do not intend
to apply the comments.


Best regards,
Krzysztof