Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   shravan kumar <shravan.chippa@microchip.com>
To:     <paul.j.murphy@intel.com>, <daniele.alessandrelli@intel.com>,
        <mchehab@kernel.org>
CC:     <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        "shravan kumar" <shravan.chippa@microchip.com>
Subject: [PATCH v7 1/5] media: i2c: imx334: modify link frequency as for the configureation
Date:   Mon, 19 Dec 2022 11:45:22 +0530
Message-ID: <20221219061526.3169369-2-shravan.chippa@microchip.com>
In-Reply-To: <20221219061526.3169369-1-shravan.chippa@microchip.com>
References: <20221219061526.3169369-1-shravan.chippa@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Shravan Chippa <shravan.chippa@microchip.com>

Currently imx334 sensor driver is configured for 1782Mbps/lane for
3840x2160@60 resolution with reqired reg mode values but if we run the
command "v4l2-ctl --all -d /dev/v4l-subdevX" it is showing incorrect link
frequeny, This is because of the incorrect value of IMX334_LINK_FREQ
witch is 891000000. it should be 1782000000.

In general with the value of 891000000 link frequency it is not possible
to configure 3840x2160@60 resolution.

Fixes: 9746b11715c3 ("media: i2c: Add imx334 camera sensor driver")

Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 drivers/media/i2c/imx334.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
index 7b0a9086447d..acc9f9f15e47 100644
--- a/drivers/media/i2c/imx334.c
+++ b/drivers/media/i2c/imx334.c
@@ -49,7 +49,7 @@
 #define IMX334_INCLK_RATE	24000000
 
 /* CSI2 HW configuration */
-#define IMX334_LINK_FREQ	891000000
+#define IMX334_LINK_FREQ	1782000000
 #define IMX334_NUM_DATA_LANES	4
 
 #define IMX334_REG_MIN		0x00
-- 
2.34.1