Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   "Cormier, Jonathan" <jcormier@criticallink.com>
To:     linux-hwmon@vger.kernel.org
Cc:     "Cormier, Jonathan" <jcormier@criticallink.com>,
        Jean Delvare <jdelvare@suse.com>,
        Guenter Roeck <linux@roeck-us.net>,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Bob Duke <bduke@criticallink.com>,
        John Pruitt <jpruitt@criticallink.com>
Subject: [PATCH v2 0/2] hwmon: ltc2945: Add binding and shunt resistor support
Date:   Mon, 19 Dec 2022 19:04:53 -0500
Message-Id: <20221220000457.1163446-1-jcormier@criticallink.com>
In-Reply-To: <20221214220727.1350784-1-jcormier@criticallink.com>
References: <20221214220727.1350784-1-jcormier@criticallink.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Added the ability to specify the value of the shunt resistor in the
device tree instead of assuming it is 1 milliOhm.

Would be good to backport as well

Changes since v1:
- Add devicetree match table
- Add kerneldoc for the ltc2945_data struct
- Cleanup excesive comments about the shunt resistor
- Switch to device_property_read_u32()

Cormier, Jonathan (1):
  dt-bindings: hwmon: adi,ltc2945: Add binding

John Pruitt (1):
  hwmon: ltc2945: Allow setting shunt resistor

 .../bindings/hwmon/adi,ltc2945.yaml           | 50 +++++++++++
 drivers/hwmon/ltc2945.c                       | 86 ++++++++++++++-----
 2 files changed, 115 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml

--
2.25.1