Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Jason Wang <jasowang@redhat.com>
To:     mst@redhat.com, jasowang@redhat.com
Cc:     davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
        pabeni@redhat.com, virtualization@lists.linux-foundation.org,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
        maxime.coquelin@redhat.com, alvaro.karsz@solid-run.com,
        eperezma@redhat.com
Subject: [PATCH 4/4] virtio-net: sleep instead of busy waiting for cvq command
Date:   Mon, 26 Dec 2022 15:49:08 +0800
Message-Id: <20221226074908.8154-5-jasowang@redhat.com>
In-Reply-To: <20221226074908.8154-1-jasowang@redhat.com>
References: <20221226074908.8154-1-jasowang@redhat.com>
MIME-Version: 1.0
Content-type: text/plain
Content-Transfer-Encoding: 8bit
Precedence: bulk

We used to busy waiting on the cvq command this tends to be
problematic since:

1) CPU could wait for ever on a buggy/malicous device
2) There's no wait to terminate the process that triggers the cvq
   command

So this patch switch to use virtqueue_wait_for_used() to sleep with a
timeout (1s) instead of busy polling for the cvq command forever. This
gives the scheduler a breath and can let the process can respond to
asignal. If the device doesn't respond in the timeout, break the
device.

Signed-off-by: Jason Wang <jasowang@redhat.com>
---
Changes since V1:
- break the device when timeout
- get buffer manually since the virtio core check more_used() instead
---
 drivers/net/virtio_net.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index efd9dd55828b..6a2ea64cfcb5 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -405,6 +405,7 @@ static void disable_rx_mode_work(struct virtnet_info *vi)
 	vi->rx_mode_work_enabled = false;
 	spin_unlock_bh(&vi->rx_mode_lock);
 
+	virtqueue_wake_up(vi->cvq);
 	flush_work(&vi->rx_mode_work);
 }
 
@@ -1497,6 +1498,11 @@ static bool try_fill_recv(struct virtnet_info *vi, struct receive_queue *rq,
 	return !oom;
 }
 
+static void virtnet_cvq_done(struct virtqueue *cvq)
+{
+	virtqueue_wake_up(cvq);
+}
+
 static void skb_recv_done(struct virtqueue *rvq)
 {
 	struct virtnet_info *vi = rvq->vdev->priv;
@@ -1984,6 +1990,8 @@ static int virtnet_tx_resize(struct virtnet_info *vi,
 	return err;
 }
 
+static int virtnet_close(struct net_device *dev);
+
 /*
  * Send command via the control virtqueue and check status.  Commands
  * supported by the hypervisor, as indicated by feature bits, should
@@ -2026,14 +2034,14 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
 	if (unlikely(!virtqueue_kick(vi->cvq)))
 		return vi->ctrl->status == VIRTIO_NET_OK;
 
-	/* Spin for a response, the kick causes an ioport write, trapping
-	 * into the hypervisor, so the request should be handled immediately.
-	 */
-	while (!virtqueue_get_buf(vi->cvq, &tmp) &&
-	       !virtqueue_is_broken(vi->cvq))
-		cpu_relax();
+	if (virtqueue_wait_for_used(vi->cvq)) {
+		virtqueue_get_buf(vi->cvq, &tmp);
+		return vi->ctrl->status == VIRTIO_NET_OK;
+	}
 
-	return vi->ctrl->status == VIRTIO_NET_OK;
+	netdev_err(vi->dev, "CVQ command timeout, break the virtio device.");
+	virtio_break_device(vi->vdev);
+	return VIRTIO_NET_ERR;
 }
 
 static int virtnet_set_mac_address(struct net_device *dev, void *p)
@@ -3526,7 +3534,7 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
 
 	/* Parameters for control virtqueue, if any */
 	if (vi->has_cvq) {
-		callbacks[total_vqs - 1] = NULL;
+		callbacks[total_vqs - 1] = virtnet_cvq_done;
 		names[total_vqs - 1] = "control";
 	}
 
-- 
2.25.1