Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Luca Weiss <luca@z3ntu.xyz>
To:     linux-arm-msm@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht
Cc:     ~postmarketos/upstreaming@lists.sr.ht,
        Rayyan Ansari <rayyan@ansari.sh>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Rayyan Ansari <rayyan@ansari.sh>
Subject: Re: [PATCH 2/3] ARM: dts: qcom: pm8226: add PON device node along with resin
 sub-node
Date:   Mon, 26 Dec 2022 13:11:33 +0100
Message-ID: <5631229.DvuYhMxLoT@g550jk>
In-Reply-To: <20221223193403.781355-3-rayyan@ansari.sh>
References: <20221223193403.781355-1-rayyan@ansari.sh>
 <20221223193403.781355-3-rayyan@ansari.sh>
MIME-Version: 1.0
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"
Precedence: bulk

On Freitag, 23. Dezember 2022 20:34:02 CET Rayyan Ansari wrote:
> The PON (Power On) device in PM8226 supports both the power key and
> resin (reset input).
> The reset input is usually connected to a physical volume up/down button.
> 
> Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>

Reviewed-by: Luca Weiss <luca@z3ntu.xyz>

> ---
>  arch/arm/boot/dts/qcom-pm8226.dtsi | 24 +++++++++++++++++++-----
>  1 file changed, 19 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi
> b/arch/arm/boot/dts/qcom-pm8226.dtsi index d99532ea70b2..403324a35cf5
> 100644
> --- a/arch/arm/boot/dts/qcom-pm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
> @@ -1,5 +1,6 @@
>  // SPDX-License-Identifier: BSD-3-Clause
>  #include <dt-bindings/iio/qcom,spmi-vadc.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/spmi/spmi.h>
> 
> @@ -10,12 +11,25 @@ pm8226_0: pm8226@0 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> 
> -		pwrkey@800 {
> -			compatible = "qcom,pm8941-pwrkey";
> +		pon@800 {
> +			compatible = "qcom,pm8916-pon";
>  			reg = <0x800>;
> -			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> -			debounce = <15625>;
> -			bias-pull-up;
> +
> +			pwrkey {
> +				compatible = "qcom,pm8941-
pwrkey";
> +				interrupts = <0x0 0x8 0 
IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +				linux,code = <KEY_POWER>;
> +			};
> +
> +			pm8226_resin: resin {
> +				compatible = "qcom,pm8941-resin";
> +				interrupts = <0x0 0x8 1 
IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +				status = "disabled";
> +			};
>  		};
> 
>  		smbb: charger@1000 {