Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Luca Weiss <luca@z3ntu.xyz>
To:     linux-arm-msm@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht
Cc:     ~postmarketos/upstreaming@lists.sr.ht,
        Rayyan Ansari <rayyan@ansari.sh>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Rayyan Ansari <rayyan@ansari.sh>
Subject: Re: [PATCH 3/3] ARM: dts: qcom: pm8226: add IADC node
Date:   Mon, 26 Dec 2022 13:14:59 +0100
Message-ID: <4448368.LvFx2qVVIh@g550jk>
In-Reply-To: <20221223193403.781355-4-rayyan@ansari.sh>
References: <20221223193403.781355-1-rayyan@ansari.sh>
 <20221223193403.781355-4-rayyan@ansari.sh>
MIME-Version: 1.0
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"
Precedence: bulk

Hi Rayyan,

On Freitag, 23. Dezember 2022 20:34:03 CET Rayyan Ansari wrote:
> Add a node for the current ADC (IADC) found in PM8226.
> 
> Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
> ---
>  arch/arm/boot/dts/qcom-pm8226.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi
> b/arch/arm/boot/dts/qcom-pm8226.dtsi index 403324a35cf5..82470549f240
> 100644
> --- a/arch/arm/boot/dts/qcom-pm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
> @@ -88,6 +88,12 @@ adc-chan@f {
>  			};
>  		};
> 
> +		pm8226_iadc: iadc@3600 {

Make this adc@ to conform to qcom,spmi-pmic.yaml docs

> +			compatible = "qcom,spmi-iadc";

Make this "qcom,pm8226-iadc", "qcom,spmi-iadc" and add to docs to conform to 
qcom,spmi-iadc.yaml

Regards
Luca

> +			reg = <0x3600>;
> +			interrupts = <0x0 0x36 0x0 
IRQ_TYPE_EDGE_RISING>;
> +		};
> +
>  		rtc@6000 {
>  			compatible = "qcom,pm8941-rtc";
>  			reg = <0x6000>, <0x6100>;