Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   =?UTF-8?q?Micha=C5=82=20Grzelak?= <mig@semihalf.com>
To:     linux-kernel@vger.kernel.org
Cc:     andrew@lunn.ch, sebastian.hesselbarth@gmail.com,
        gregory.clement@bootlin.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        mw@semihalf.com, upstream@semihalf.com, mchl.grzlk@gmail.com,
        =?UTF-8?q?Micha=C5=82=20Grzelak?= <mig@semihalf.com>
Subject: [PATCH v3] ARM: dts: dove.dtsi: Move ethphy to fix schema error
Date:   Thu, 29 Dec 2022 19:01:55 +0100
Message-Id: <20221229180155.99303-1-mig@semihalf.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

Running 'make dtbs_check' with schema in net/marvell,orion-mdio.yaml
gives following warnings:
mdio-bus@72004: Unevaluated properties are not allowed
('ethernet-phy' was unexpected)
	arch/arm/boot/dts/dove-cubox.dtb
	arch/arm/boot/dts/dove-cubox-es.dtb
	arch/arm/boot/dts/dove-d2plug.dtb
	arch/arm/boot/dts/dove-d2plug.dtb
	arch/arm/boot/dts/dove-dove-db.dtb
	arch/arm/boot/dts/dove-d3plug.dtb
	arch/arm/boot/dts/dove-sbc-a510.dtb
As every subnode of mdio is expected to have an @X, ethernet-phy subnode
in dove.dtsi doesn't have one. Fix these errors by moving ethernet-phy
into relevant .dts files with correct @<reg address>.

Signed-off-by: Michał Grzelak <mig@semihalf.com>
---
Changelog:
v2->v3
- edit commit message according to
  https://lore.kernel.org/all/Y6zuJrb+8j+XCksN@lunn.ch/

v1->v2
- remove patternProperties: from .yaml
- move ethphy from dove.dtsi into relevant .dts files

 arch/arm/boot/dts/dove-cm-a510.dtsi | 14 +++++++++++---
 arch/arm/boot/dts/dove-cubox.dts    | 15 +++++++++++----
 arch/arm/boot/dts/dove.dtsi         |  5 -----
 3 files changed, 22 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
index 9b9dfbe07be4..2f2f0a4bf004 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dtsi
+++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
@@ -124,9 +124,17 @@ wifi_power: regulator@1 {
 };
 
 /* Optional RTL8211D GbE PHY on SMI address 0x03 */
-&ethphy {
-	reg = <3>;
-	status = "disabled";
+&mdio {
+	ethphy: ethernet-phy@3 {
+		reg = <3>;
+		status = "disabled";
+	};
+};
+
+&eth {
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 2639b9fe0ab4..170c14d7f5c8 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -72,11 +72,18 @@ gpu-subsystem {
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &mdio { status = "okay"; };
-&eth { status = "okay"; };
+&eth {
+	status = "okay";
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
 
-&ethphy {
-	compatible = "marvell,88e1310";
-	reg = <1>;
+&mdio {
+	ethphy: ethernet-phy@1 {
+		compatible = "marvell,88e1310";
+		reg = <1>;
+	};
 };
 
 &gpu {
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 00a36fba2fd2..c7a3fa33c56e 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -382,7 +382,6 @@ ethernet-port@0 {
 					interrupts = <29>;
 					/* overwrite MAC address in bootloader */
 					local-mac-address = [00 00 00 00 00 00];
-					phy-handle = <&ethphy>;
 				};
 			};
 
@@ -394,10 +393,6 @@ mdio: mdio-bus@72004 {
 				interrupts = <30>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
-
-				ethphy: ethernet-phy {
-					/* set phy address in board file */
-				};
 			};
 
 			sdio0: sdio-host@92000 {
-- 
2.34.1