Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   =?UTF-8?q?Bernhard=20Rosenkr=C3=A4nzer?= <bero@baylibre.com>
To:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org, linux-usb@vger.kernel.org,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        tglx@linutronix.de, maz@kernel.org, lee@kernel.org,
        linus.walleij@linaro.org, matthias.bgg@gmail.com,
        chunfeng.yun@mediatek.com, gregkh@linuxfoundation.org,
        angelogioacchino.delregno@collabora.com,
        allen-kh.cheng@mediatek.com, nfraprado@collabora.com,
        sean.wang@mediatek.com, zhiyong.tao@mediatek.com
Subject: [PATCH v7 0/7] Add minimal MT8365 and MT8365-EVK support
Date:   Sun,  1 Jan 2023 23:01:42 +0100
Message-Id: <20230101220149.3035048-1-bero@baylibre.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

This adds minimal support for the MediaTek 8365 SOC and the EVK reference
board, allowing the board to boot to initramfs with serial port I/O.

v7:
  - Update GIC information in mt8365.dtsi (thanks to Marc Zyngier for
    pointing out the problem)
  - Adjust the timer to match the updated GIC information

v6:
  - Add systimer in mt8365.dtsi
  - Add I/D caches and L2 cache details in mt8365.dtsi
  - Move bl31_secmon_reserved from mt8365.dtsi to mt8365-evk.dts
  - Fix inconsistent indentation in mt8365-pinctrl example
  - Further mt8365.dtsi cleanups
  - Submit to additional maintainers spotted by get_maintainer.pl

v5:
  - Reorder top-level entries in mediatek,mt8365-pinctrl.yaml to match
    example-schema
  - Use consistent quotes

v4:
  - Remove pins-are-numbered references that have been holding things up
    now that the patches removing it from dt-bindings have landed in linux-next

v3:
  - Remove a number of components that are not yet supported (they will
    come back alongside the corresponding drivers)
  - Address issues found by dt_binding_check (mostly fixing pinctrl
    bindings)
  - Address issues pointed out in comments
  - Reorder patches

v2:
  - Add missing dt-bindings documentation
  - Small cleanups addressing issues in v1 pointed out by Krzysztof Kozlowski


Bernhard Rosenkränzer (4):
  dt-bindings: arm64: dts: mediatek: Add mt8365-evk board
  dt-bindings: irq: mtk, sysirq: add support for mt8365
  dt-bindings: mfd: syscon: Add mt8365-syscfg
  dt-bindings: pinctrl: add bindings for Mediatek MT8365 SoC

Fabien Parent (3):
  dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  arm64: dts: mediatek: Initial mt8365-evk support

 .../devicetree/bindings/arm/mediatek.yaml     |   4 +
 .../interrupt-controller/mediatek,sysirq.txt  |   1 +
 .../devicetree/bindings/mfd/syscon.yaml       |   1 +
 .../pinctrl/mediatek,mt8365-pinctrl.yaml      | 197 +++++++++
 .../bindings/usb/mediatek,mtk-xhci.yaml       |   1 +
 .../bindings/usb/mediatek,mtu3.yaml           |   1 +
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 arch/arm64/boot/dts/mediatek/mt8365-evk.dts   | 169 ++++++++
 arch/arm64/boot/dts/mediatek/mt8365.dtsi      | 378 ++++++++++++++++++
 9 files changed, 753 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi

-- 
2.39.0