Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <d6ea12cc-218d-27bd-00f9-da3b81027f7b@linaro.org>
Date:   Tue, 3 Jan 2023 14:36:45 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.6.1
Subject: Re: [PATCH v2 5/6] arm64: dts: qcom: sm8450-hdk: move wcd938x codec
 node
Content-Language: en-US
To:     Johan Hovold <johan+linaro@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>
Cc:     Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20230103103141.15807-1-johan+linaro@kernel.org>
 <20230103103141.15807-6-johan+linaro@kernel.org>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20230103103141.15807-6-johan+linaro@kernel.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 3.01.2023 11:31, Johan Hovold wrote:
> The wcd938x codec is not a memory-mapped device and does not belong
> under the soc node.
> 
> Move the node to the root node to avoid DT validation failures.
> 
> While at it, clean up the node somewhat by reordering properties and
> renaming it 'audio-codec'.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 53 ++++++++++++-------------
>  1 file changed, 26 insertions(+), 27 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> index 4de3e1f1c39c..8ac7265d8c10 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> @@ -17,6 +17,32 @@ aliases {
>  		serial0 = &uart7;
>  	};
>  
> +	wcd938x: audio-codec {
> +		compatible = "qcom,wcd9380-codec";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wcd_default>;
> +
> +		qcom,micbias1-microvolt = <1800000>;
> +		qcom,micbias2-microvolt = <1800000>;
> +		qcom,micbias3-microvolt = <1800000>;
> +		qcom,micbias4-microvolt = <1800000>;
> +		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> +		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
> +		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> +		qcom,rx-device = <&wcd_rx>;
> +		qcom,tx-device = <&wcd_tx>;
> +
> +		reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
> +
> +		vdd-buck-supply = <&vreg_s10b_1p8>;
> +		vdd-rxtx-supply = <&vreg_s10b_1p8>;
> +		vdd-io-supply = <&vreg_s10b_1p8>;
> +		vdd-mic-bias-supply = <&vreg_bob>;
> +
> +		#sound-dai-cells = <1>;
> +	};
> +
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> @@ -407,33 +433,6 @@ &sdhc_2 {
>  	status = "okay";
>  };
>  
> -&soc {
> -	wcd938x: codec {
> -		compatible = "qcom,wcd9380-codec";
> -
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&wcd_default>;
> -
> -		qcom,micbias1-microvolt = <1800000>;
> -		qcom,micbias2-microvolt = <1800000>;
> -		qcom,micbias3-microvolt = <1800000>;
> -		qcom,micbias4-microvolt = <1800000>;
> -		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> -		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
> -		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> -		qcom,rx-device = <&wcd_rx>;
> -		qcom,tx-device = <&wcd_tx>;
> -
> -		reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
> -		#sound-dai-cells = <1>;
> -
> -		vdd-buck-supply = <&vreg_s10b_1p8>;
> -		vdd-rxtx-supply = <&vreg_s10b_1p8>;
> -		vdd-io-supply = <&vreg_s10b_1p8>;
> -		vdd-mic-bias-supply = <&vreg_bob>;
> -	};
> -};
> -
>  &sound {
>  	compatible = "qcom,sm8450-sndcard";
>  	model = "SM8450-HDK";