Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   nick.hawkins@hpe.com
To:     verdun@hpe.com, nick.hawkins@hpe.com, jdelvare@suse.com,
        linux@roeck-us.net, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, corbet@lwn.net,
        linux@armlinux.org.uk, linux-hwmon@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/5] ARM: dts: add GXP Support for fans and SPI
Date:   Tue,  3 Jan 2023 14:36:52 -0600
Message-Id: <20230103203654.59322-4-nick.hawkins@hpe.com>
In-Reply-To: <20230103203654.59322-1-nick.hawkins@hpe.com>
References: <20230103203654.59322-1-nick.hawkins@hpe.com>
Precedence: bulk

From: Nick Hawkins <nick.hawkins@hpe.com>

Reorganize the base address of AHB to accommodate the SPI and fan driver
register requirements. Add the hpe,gxp-spifi and hpe,gxp-fan-ctrl
compatibles. Add comments to make the register range more clear.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>

---
v4:
 *No change
v3:
 *No change
v2:
 *Changed fn2reg to fn2
 *Changed plreg to pl
 *Changed fanctrl to fan-controller
 *Adjusted base register range to elminate need for defines in code
---
 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 58 +++++++++++++++++++++
 arch/arm/boot/dts/hpe-gxp.dtsi           | 64 +++++++++++++++++-------
 2 files changed, 103 insertions(+), 19 deletions(-)

diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
index 3a7382ce40ef..d49dcef95c5c 100644
--- a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -24,3 +24,61 @@
 		reg = <0x40000000 0x20000000>;
 	};
 };
+
+&spifi {
+	status = "okay";
+	flash@0 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot@0 {
+				label = "u-boot";
+				reg = <0x0 0x60000>;
+			};
+
+			u-boot-env@60000 {
+				label = "u-boot-env";
+				reg = <0x60000 0x20000>;
+			};
+
+			kernel@80000 {
+				label = "kernel";
+				reg = <0x80000 0x4c0000>;
+			};
+
+			rofs@540000 {
+				label = "rofs";
+				reg = <0x540000 0x1740000>;
+			};
+
+			rwfs@1c80000 {
+				label = "rwfs";
+				reg = <0x1c80000 0x250000>;
+			};
+
+			section@1ed0000{
+				label = "section";
+				reg = <0x1ed0000 0x130000>;
+			};
+		};
+	};
+	flash@1 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			host-prime@0 {
+				label = "host-prime";
+				reg = <0x0 0x02000000>;
+			};
+
+			host-second@2000000 {
+				label = "host-second";
+				reg = <0x02000000 0x02000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
index cf735b3c4f35..b73b22a93716 100644
--- a/arch/arm/boot/dts/hpe-gxp.dtsi
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree file for HPE GXP
+ * Device Tree for HPE
  */
 
 /dts-v1/;
@@ -52,76 +52,102 @@
 			cache-level = <2>;
 		};
 
-		ahb@c0000000 {
+		ahb@80000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x0 0xc0000000 0x30000000>;
+			ranges = <0x0 0x80000000 0xf000000>, /* 0x80000000 - 0x8f000000 */
+				 <0x40000000 0xc0000000 0x7fffffff>; /* 0xc0000000 - 0xffffffff */
 			dma-ranges;
 
-			vic0: interrupt-controller@eff0000 {
+			spifi: spi@40000200 { /* 0xc0000200 */
+				compatible = "hpe,gxp-spifi";
+				reg = <0x40000200 0x80>, <0x4000c000 0x100>, <0x78000000 0x7ff0000>;
+				interrupts = <20>;
+				interrupt-parent = <&vic0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+				flash@0 {
+					reg = <0>;
+					compatible = "jedec,spi-nor";
+				};
+
+				flash@1 {
+					reg = <1>;
+					compatible = "jedec,spi-nor";
+				};
+			};
+
+			vic0: interrupt-controller@4eff0000 { /* 0xceff0000 */
 				compatible = "arm,pl192-vic";
-				reg = <0xeff0000 0x1000>;
+				reg = <0x4eff0000 0x1000>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
 
-			vic1: interrupt-controller@80f00000 {
+			vic1: interrupt-controller@f00000 { /* 0x80f00000 */
 				compatible = "arm,pl192-vic";
-				reg = <0x80f00000 0x1000>;
+				reg = <0xf00000 0x1000>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
 
-			uarta: serial@e0 {
+			uarta: serial@400000e0 { /* 0xc00000e0 */
 				compatible = "ns16550a";
-				reg = <0xe0 0x8>;
+				reg = <0x400000e0 0x8>;
 				interrupts = <17>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			uartb: serial@e8 {
+			uartb: serial@400000e8 { /* 0xc00000e8 */
 				compatible = "ns16550a";
-				reg = <0xe8 0x8>;
+				reg = <0x400000e8 0x8>;
 				interrupts = <18>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			uartc: serial@f0 {
+			uartc: serial@400000f0 { /* 0xc00000f0 */
 				compatible = "ns16550a";
-				reg = <0xf0 0x8>;
+				reg = <0x400000f0 0x8>;
 				interrupts = <19>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			usb0: usb@efe0000 {
+			usb0: usb@4efe0000 { /* 0xcefe0000 */
 				compatible = "hpe,gxp-ehci", "generic-ehci";
-				reg = <0xefe0000 0x100>;
+				reg = <0x4efe0000 0x100>;
 				interrupts = <7>;
 				interrupt-parent = <&vic0>;
 			};
 
-			st: timer@80 {
+			st: timer@40000080 { /* 0xc0000080 */
 				compatible = "hpe,gxp-timer";
-				reg = <0x80 0x16>;
+				reg = <0x40000080 0x16>;
 				interrupts = <0>;
 				interrupt-parent = <&vic0>;
 				clocks = <&iopclk>;
 				clock-names = "iop";
 			};
 
-			usb1: usb@efe0100 {
+			usb1: usb@4efe0100 { /* 0xcefe0100 */
 				compatible = "hpe,gxp-ohci", "generic-ohci";
-				reg = <0xefe0100 0x110>;
+				reg = <0x4efe0100 0x110>;
 				interrupts = <6>;
 				interrupt-parent = <&vic0>;
 			};
+
+			fan-controller@40000c10 { /* 0xc0000c10 */
+				compatible = "hpe,gxp-fan-ctrl";
+				reg = <0x40000c10 0x8>, <0x51000027 0x06>, <0x200070 0x04>;
+				reg-names = "base", "pl", "fn2";
+			};
 		};
 	};
 };
-- 
2.17.1