Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Biao Huang <biao.huang@mediatek.com>
To:     Andrew Lunn <andrew@lunn.ch>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Matthias Brugger <matthias.bgg@gmail.com>
CC:     Giuseppe Cavallaro <peppe.cavallaro@st.com>,
        Alexandre Torgue <alexandre.torgue@foss.st.com>,
        Jose Abreu <joabreu@synopsys.com>,
        "David S . Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        "Jakub Kicinski" <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Richard Cochran <richardcochran@gmail.com>,
        <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-mediatek@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>,
        "Biao Huang" <biao.huang@mediatek.com>, <macpaul.lin@mediatek.com>,
        <netdev@vger.kernel.org>
Subject: [PATCH v7 0/2] arm64: dts: mt8195: Add Ethernet controller
Date:   Wed, 4 Jan 2023 16:58:55 +0800
Message-ID: <20230104085857.2410-1-biao.huang@mediatek.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Changes in v7:
1. move mdio node to .dtsi, and remove the compatible
property in ethernet-phy node as Andrew's comments.
2. add netdev@ to cc list as Jakub's reminder.

Changes in v6:
1. add reviewed-by as Angelo's comments
2. remove fix_mac_speed in driver as Andrew's comments.

Changes in v5:
1. reorder the clocks as Angelo's comments
2. add a driver patch to fix rgmii-id issue, then we can
use a ususal way rgmii/rgmii-id as Andrew's comments.

Changes in v4:
1. remove {address,size}-cells = <0> to avoid warning as Angelo's feedback.
2. Add reviewd-by as Angelo's comments.

Changes in v3:
1. move stmmac-axi-config, rx-queues-config, tx-queues-configs inside ethernet
node as Angelo's comments.
2. add {address,size}-cells = <0> in ethernet node as Angelo's comments.

Changes in v2:
1. modify pinctrl node used by ethernet to match rules in pinctrl-mt8195.yaml,
which is pointed by Krzysztof.
2. remove "mac-address" property in ethernet node as comments of Krzysztof.

Changes in v1:
add dts node for MT8195 Ethernet controller

Biao Huang (2):
  stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed
  arm64: dts: mt8195: Add Ethernet controller

 arch/arm64/boot/dts/mediatek/mt8195-demo.dts  | 77 ++++++++++++++++
 arch/arm64/boot/dts/mediatek/mt8195.dtsi      | 92 +++++++++++++++++++
 .../ethernet/stmicro/stmmac/dwmac-mediatek.c  | 26 ------
 3 files changed, 169 insertions(+), 26 deletions(-)

-- 
2.18.0