Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Sia Jee Heng <jeeheng.sia@starfivetech.com>
To:     <paul.walmsley@sifive.com>, <palmer@dabbelt.com>,
        <aou@eecs.berkeley.edu>
CC:     <linux-riscv@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
        <jeeheng.sia@starfivetech.com>, <leyfoon.tan@starfivetech.com>,
        <mason.huo@starfivetech.com>
Subject: [PATCH 0/3] RISC-V Hibernation Support
Date:   Fri, 6 Jan 2023 14:05:32 +0800
Message-ID: <20230106060535.104321-1-jeeheng.sia@starfivetech.com>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 8BIT
Precedence: bulk

This series adds RISC-V Hibernation/suspend to disk support.
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.

arch_hibernation_header_restore() and arch_hibernation_header_save()
functions are implemented to prevent kernel crash when resume,
the kernel built version is saved into the hibernation image header
to making sure only the same kernel is restore when resume.

swsusp_arch_resume() creates a temporary page table that covering only
the linear map, copies the restore code to a 'safe' page, then start to
restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.

To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE


At high-level, this series includes the following changes:
1) Change suspend_save_csrs() and suspend_restore_csrs()
   to public function as these functions are common to
   suspend/hibernation. (patch 1)
2) Enhance kernel_page_present() function to support huge page. (patch 2)
3) Add arch/riscv low level functions to support
   hibernation/suspend to disk. (patch 3)

The above patches are based on kernel v6.2-rc2 and are tested on
Starfive VF2 SBC board.

Sia Jee Heng (3):
  RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public
    function
  RISC-V: mm: Enable huge page support to kernel_page_present() function
  RISC-V: Add arch functions to support hibernation/suspend-to-disk

 arch/riscv/Kconfig                |   7 +
 arch/riscv/include/asm/suspend.h  |  23 ++
 arch/riscv/kernel/Makefile        |   2 +-
 arch/riscv/kernel/asm-offsets.c   |   5 +
 arch/riscv/kernel/hibernate-asm.S | 123 +++++++++++
 arch/riscv/kernel/hibernate.c     | 353 ++++++++++++++++++++++++++++++
 arch/riscv/kernel/suspend.c       |   4 +-
 arch/riscv/mm/pageattr.c          |   6 +
 8 files changed, 520 insertions(+), 3 deletions(-)
 create mode 100644 arch/riscv/kernel/hibernate-asm.S
 create mode 100644 arch/riscv/kernel/hibernate.c


base-commit: 1f5abbd77e2c1787e74b7c2caffac97def78ba52
-- 
2.34.1