Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   shravan kumar <shravan.chippa@microchip.com>
To:     <paul.j.murphy@intel.com>, <daniele.alessandrelli@intel.com>,
        <mchehab@kernel.org>
CC:     <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        "shravan kumar" <shravan.chippa@microchip.com>
Subject: [PATCH v8 2/4] media: i2c: imx334: add missing reset values for mode 3840x2160_regs[]
Date:   Fri, 6 Jan 2023 12:59:29 +0530
Message-ID: <20230106072931.2317597-3-shravan.chippa@microchip.com>
In-Reply-To: <20230106072931.2317597-1-shravan.chippa@microchip.com>
References: <20230106072931.2317597-1-shravan.chippa@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Shravan Chippa <shravan.chippa@microchip.com>

There are some missing reset reg_mode values for the 3840x2160@60
resolution. The camera sensor still works in 3840x2160@60 resolution mode
because of the register reset values. This is an issue when we change the
modes dynamically. As an example, when we change the mode from 1920x1080@30
 resolution to 3840x2160@60 resoultion then the mode values will be written
to the registers from the array mode_3840x2160_regs[] which gives the wrong
output which is incorrect resolution.

So add the missing reset values to the mode_3840x2160_regs[].

Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
---
 drivers/media/i2c/imx334.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
index ebacba3059b3..a4549d194cae 100644
--- a/drivers/media/i2c/imx334.c
+++ b/drivers/media/i2c/imx334.c
@@ -166,6 +166,7 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
 	{0x3288, 0x21},
 	{0x328a, 0x02},
 	{0x302c, 0x3c},
+	{0x302d, 0x00},
 	{0x302e, 0x00},
 	{0x302f, 0x0f},
 	{0x3076, 0x70},
@@ -240,7 +241,26 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
 	{0x3794, 0x7a},
 	{0x3796, 0xa1},
 	{0x3e04, 0x0e},
+	{0x319e, 0x00},
 	{0x3a00, 0x01},
+	{0x3A18, 0xBF},
+	{0x3A19, 0x00},
+	{0x3A1A, 0x67},
+	{0x3A1B, 0x00},
+	{0x3A1C, 0x6F},
+	{0x3A1D, 0x00},
+	{0x3A1E, 0xD7},
+	{0x3A1F, 0x01},
+	{0x3A20, 0x6F},
+	{0x3A21, 0x00},
+	{0x3A22, 0xCF},
+	{0x3A23, 0x00},
+	{0x3A24, 0x6F},
+	{0x3A25, 0x00},
+	{0x3A26, 0xB7},
+	{0x3A27, 0x00},
+	{0x3A28, 0x5F},
+	{0x3A29, 0x00},
 };
 
 /* Supported sensor mode configurations */
-- 
2.34.1