Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Jiri Olsa <olsajiri@gmail.com>
Date:   Fri, 6 Jan 2023 10:45:40 +0100
To:     Jiri Olsa <olsajiri@gmail.com>
Cc:     Zhen Lei <thunder.leizhen@huawei.com>,
        Petr Mladek <pmladek@suse.com>,
        Josh Poimboeuf <jpoimboe@kernel.org>,
        Jiri Kosina <jikos@kernel.org>,
        Miroslav Benes <mbenes@suse.cz>,
        Joe Lawrence <joe.lawrence@redhat.com>,
        Alexei Starovoitov <ast@kernel.org>,
        Daniel Borkmann <daniel@iogearbox.net>,
        Andrii Nakryiko <andrii@kernel.org>,
        Martin KaFai Lau <martin.lau@linux.dev>,
        Song Liu <song@kernel.org>, Yonghong Song <yhs@fb.com>,
        John Fastabend <john.fastabend@gmail.com>,
        KP Singh <kpsingh@kernel.org>,
        Stanislav Fomichev <sdf@google.com>,
        Hao Luo <haoluo@google.com>,
        Steven Rostedt <rostedt@goodmis.org>,
        Masami Hiramatsu <mhiramat@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>, bpf@vger.kernel.org,
        linux-trace-kernel@vger.kernel.org, live-patching@vger.kernel.org,
        linux-kernel@vger.kernel.org, Luis Chamberlain <mcgrof@kernel.org>,
        linux-modules@vger.kernel.org
Subject: Re: [PATCH 2/3] bpf: Optimize get_modules_for_addrs()
Message-ID: <Y7ftxIiV35Wd75lZ@krava>
References: <20221230112729.351-1-thunder.leizhen@huawei.com>
 <20221230112729.351-3-thunder.leizhen@huawei.com>
 <Y7WoZARt37xGpjXD@alley>
 <Y7dBoII5kZnHGFdL@krava>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <Y7dBoII5kZnHGFdL@krava>
Precedence: bulk

On Thu, Jan 05, 2023 at 10:31:12PM +0100, Jiri Olsa wrote:
> On Wed, Jan 04, 2023 at 05:25:08PM +0100, Petr Mladek wrote:
> > On Fri 2022-12-30 19:27:28, Zhen Lei wrote:
> > > Function __module_address() can quickly return the pointer of the module
> > > to which an address belongs. We do not need to traverse the symbols of all
> > > modules to check whether each address in addrs[] is the start address of
> > > the corresponding symbol, because register_fprobe_ips() will do this check
> > > later.
> 
> hum, for some reason I can see only replies to this patch and
> not the actual patch.. I'll dig it out of the lore I guess
> 
> > > 
> > > Assuming that there are m modules, each module has n symbols on average,
> > > and the number of addresses 'addrs_cnt' is abbreviated as K. Then the time
> > > complexity of the original method is O(K * log(K)) + O(m * n * log(K)),
> > > and the time complexity of current method is O(K * (log(m) + M)), M <= m.
> > > (m * n * log(K)) / (K * m) ==> n / log2(K). Even if n is 10 and K is 128,
> > > the ratio is still greater than 1. Therefore, the new method will
> > > generally have better performance.
> 
> could you try to benchmark that? I tried something similar but was not
> able to get better performance

hm looks like I tried the smilar thing (below) like you did,
but wasn't able to get better performace

I guess your goal is to get rid of the module arg in
module_kallsyms_on_each_symbol callback that we use?
I'm ok with the change if the performace is not worse

jirka


---
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 5b9008bc597b..3280c22009f1 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -2692,23 +2692,16 @@ struct module_addr_args {
 	int mods_cap;
 };
 
-static int module_callback(void *data, const char *name,
-			   struct module *mod, unsigned long addr)
+static int add_module(struct module_addr_args *args, struct module *mod)
 {
-	struct module_addr_args *args = data;
 	struct module **mods;
 
-	/* We iterate all modules symbols and for each we:
-	 * - search for it in provided addresses array
-	 * - if found we check if we already have the module pointer stored
-	 *   (we iterate modules sequentially, so we can check just the last
-	 *   module pointer)
+	/* We iterate sorted addresses and for each within module we:
+	 * - check if we already have the module pointer stored for it
+	 *   (we iterate sorted addresses sequentially, so we can check
+	 *   just the last module pointer)
 	 * - take module reference and store it
 	 */
-	if (!bsearch(&addr, args->addrs, args->addrs_cnt, sizeof(addr),
-		       bpf_kprobe_multi_addrs_cmp))
-		return 0;
-
 	if (args->mods && args->mods[args->mods_cnt - 1] == mod)
 		return 0;
 
@@ -2734,10 +2727,24 @@ static int get_modules_for_addrs(struct module ***mods, unsigned long *addrs, u3
 		.addrs     = addrs,
 		.addrs_cnt = addrs_cnt,
 	};
-	int err;
+	u32 i, err = 0;
+
+	for (i = 0; !err && i < addrs_cnt; i++) {
+		struct module *mod;
+		bool found = false;
+
+		preempt_disable();
+		mod = __module_text_address(addrs[i]);
+		found = mod && try_module_get(mod);
+		preempt_enable();
+
+		if (found) {
+			err = add_module(&args, mod);
+			module_put(mod);
+		}
+	}
 
 	/* We return either err < 0 in case of error, ... */
-	err = module_kallsyms_on_each_symbol(module_callback, &args);
 	if (err) {
 		kprobe_multi_put_modules(args.mods, args.mods_cnt);
 		kfree(args.mods);
@@ -2862,7 +2869,8 @@ int bpf_kprobe_multi_link_attach(const union bpf_attr *attr, struct bpf_prog *pr
 	} else {
 		/*
 		 * We need to sort addrs array even if there are no cookies
-		 * provided, to allow bsearch in get_modules_for_addrs.
+		 * provided, to allow sequential address walk in
+		 * get_modules_for_addrs.
 		 */
 		sort(addrs, cnt, sizeof(*addrs),
 		       bpf_kprobe_multi_addrs_cmp, NULL);