Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <0975e89d-e55d-cf17-da77-636f4b0cbf9f@ti.com>
Date:   Mon, 9 Jan 2023 09:39:07 +0530
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.6.0
Subject: Re: [PATCH v7 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ
 device tree node
Content-Language: en-US
To:     Matt Ranostay <mranostay@ti.com>, <nm@ti.com>, <afd@ti.com>,
        <kristo@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>,
        <r-gunasekaran@ti.com>
CC:     <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
References: <20221122101616.770050-1-mranostay@ti.com>
 <20221122101616.770050-3-mranostay@ti.com>
From:   Vignesh Raghavendra <vigneshr@ti.com>
In-Reply-To: <20221122101616.770050-3-mranostay@ti.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Precedence: bulk

[...]

On 22/11/22 15:46, Matt Ranostay wrote:
> +#include <dt-bindings/phy/phy-cadence.h>
> +#include <dt-bindings/phy/phy-ti.h>
> +
> +/ {
> +	serdes_refclk: clock-cmnrefclk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <0>;
> +	};
> +};
> +
>  &cbass_main {
>  	msmc_ram: sram@70000000 {
>  		compatible = "mmio-sram";
> @@ -38,6 +49,13 @@ usb_serdes_mux: mux-controller-0 {
>  			#mux-control-cells = <1>;
>  			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
>  		};
> +
> +		serdes_ln_ctrl: mux-controller-80 {

Same as previous patch:

+/workdir/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon@104000: 'mux-controller-0', 'mux-controller-80' do not match any of the regexes: '^clock-controller@[0-9a-f]+$', '^mux-controller@[0-9a-f]+$', 'phy@[0-9a-f]+$', 'pinctrl-[0-9]+'


> +			compatible = "mmio-mux";
> +			#mux-control-cells = <1>;
> +			mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
> +					<0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
> +		};
>  	};

[...]

-- 
Regards
Vignesh