Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <65e3ca66-a4ba-db9b-3640-c90a7bdee61b@ideasonboard.com>
Date:   Mon, 9 Jan 2023 11:53:22 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.4.2
Subject: Re: [PATCH v6 5/8] dt-bindings: media: add TI DS90UB960 FPD-Link III
 Deserializer
Content-Language: en-US
To:     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc:     linux-media@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Wolfram Sang <wsa@kernel.org>,
        Luca Ceresoli <luca.ceresoli@bootlin.com>,
        Andy Shevchenko <andriy.shevchenko@intel.com>,
        Matti Vaittinen <Matti.Vaittinen@fi.rohmeurope.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Peter Rosin <peda@axentia.se>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Sakari Ailus <sakari.ailus@linux.intel.com>,
        Michael Tretter <m.tretter@pengutronix.de>,
        Shawn Tu <shawnx.tu@intel.com>,
        Hans Verkuil <hverkuil@xs4all.nl>,
        Mike Pagano <mpagano@gentoo.org>,
        =?UTF-8?Q?Krzysztof_Ha=c5=82asa?= <khalasa@piap.pl>,
        Marek Vasut <marex@denx.de>, Rob Herring <robh@kernel.org>
References: <20230105140307.272052-1-tomi.valkeinen@ideasonboard.com>
 <20230105140307.272052-6-tomi.valkeinen@ideasonboard.com>
 <Y7o3QEq9utV8nswA@pendragon.ideasonboard.com>
 <a3857c78-c221-176f-b862-a0435b301c67@ideasonboard.com>
 <Y7vZzg6YyC2IaUso@pendragon.ideasonboard.com>
From:   Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
In-Reply-To: <Y7vZzg6YyC2IaUso@pendragon.ideasonboard.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 09/01/2023 11:09, Laurent Pinchart wrote:
> On Mon, Jan 09, 2023 at 10:30:13AM +0200, Tomi Valkeinen wrote:
>> On 08/01/2023 05:23, Laurent Pinchart wrote:
>>> Hi Tomi,
>>>
>>> Thank you for the patch.
>>>
>>> On Thu, Jan 05, 2023 at 04:03:04PM +0200, Tomi Valkeinen wrote:
>>>> Add DT bindings for TI DS90UB960 FPD-Link III Deserializer.
>>>>
>>>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
>>>> Reviewed-by: Rob Herring <robh@kernel.org>
>>>> ---
>>>>    .../bindings/media/i2c/ti,ds90ub960.yaml      | 402 ++++++++++++++++++
>>>>    1 file changed, 402 insertions(+)
>>>>    create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
>>>> new file mode 100644
>>>> index 000000000000..664799ae55be
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
>>>> @@ -0,0 +1,402 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs
>>>> +
>>>> +maintainers:
>>>> +  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
>>>> +
>>>> +description:
>>>> +  The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO
>>>> +  forwarding.
>>>> +
>>>> +properties:
>>>> +  compatible:
>>>> +    enum:
>>>> +      - ti,ds90ub960-q1
>>>> +      - ti,ds90ub9702-q1
>>>> +
>>>> +  reg:
>>>> +    maxItems: 1
>>>> +
>>>> +  clocks:
>>>> +    maxItems: 1
>>>> +    description:
>>>> +      Reference clock connected to the REFCLK pin.
>>>> +
>>>> +  clock-names:
>>>> +    items:
>>>> +      - const: refclk
>>>> +
>>>> +  powerdown-gpios:
>>>> +    maxItems: 1
>>>> +    description:
>>>> +      Specifier for the GPIO connected to the PDB pin.
>>>> +
>>>> +  i2c-alias-pool:
>>>> +    $ref: /schemas/types.yaml#/definitions/uint16-array
>>>> +    description:
>>>> +      I2C alias pool is a pool of I2C addresses on the main I2C bus that can be
>>>> +      used to access the remote peripherals on the serializer's I2C bus. The
>>>> +      addresses must be available, not used by any other peripheral. Each
>>>> +      remote peripheral is assigned an alias from the pool, and transactions to
>>>> +      that address will be forwarded to the remote peripheral, with the address
>>>> +      translated to the remote peripheral's real address. This property is not
>>>> +      needed if there are no I2C addressable remote peripherals.
>>>> +
>>>> +  links:
>>>> +    type: object
>>>> +    additionalProperties: false
>>>> +
>>>> +    properties:
>>>> +      '#address-cells':
>>>> +        const: 1
>>>> +
>>>> +      '#size-cells':
>>>> +        const: 0
>>>> +
>>>> +      ti,manual-strobe:
>>>> +        type: boolean
>>>> +        description:
>>>> +          Enable manual strobe position and EQ level
>>>> +
>>>> +    patternProperties:
>>>> +      '^link@[0-3]$':
>>>> +        type: object
>>>> +        additionalProperties: false
>>>> +        properties:
>>>> +          reg:
>>>> +            description: The link number
>>>> +            maxItems: 1
>>>> +
>>>> +          i2c-alias:
>>>> +            description:
>>>> +              The I2C address used for the serializer. Transactions to this
>>>> +              address on the I2C bus where the deserializer resides are
>>>> +              forwarded to the serializer.
>>>> +
>>>> +          ti,rx-mode:
>>>> +            $ref: /schemas/types.yaml#/definitions/uint32
>>>> +            enum:
>>>> +              - 0 # RAW10
>>>> +              - 1 # RAW12 HF
>>>> +              - 2 # RAW12 LF
>>>> +              - 3 # CSI2 SYNC
>>>> +              - 4 # CSI2 NON-SYNC
>>>> +            description:
>>>> +              FPD-Link Input Mode. This should reflect the hardware and the
>>>> +              default mode of the connected camera module.
>>>
>>> As the remote device may not be a camera, I'd write "of the connected
>>> device" or "of the connected serializer".
>>
>> I was trying to include the sensor also in the "camera module", as the
>> sensor's "normal" pixel cloud would affect RAW modes (HF/LF). Perhaps
>> "connected device" covers this.
>>
>>>> +
>>>> +          ti,cdr-mode:
>>>> +            $ref: /schemas/types.yaml#/definitions/uint32
>>>> +            enum:
>>>> +              - 0 # FPD-Link III
>>>> +              - 1 # FPD-Link IV
>>>> +            description:
>>>> +              FPD-Link CDR Mode. This should reflect the hardware and the
>>>> +              default mode of the connected camera module.
>>>> +
>>>> +          ti,strobe-pos:
>>>> +            $ref: /schemas/types.yaml#/definitions/int32
>>>> +            minimum: -13
>>>> +            maximum: 13
>>>> +            description: Manual strobe position
>>>> +
>>>> +          ti,eq-level:
>>>> +            $ref: /schemas/types.yaml#/definitions/uint32
>>>> +            maximum: 14
>>>> +            description: Manual EQ level
>>>> +
>>>> +          serializer:
>>>> +            type: object
>>>> +            description: FPD-Link Serializer node
>>>> +
>>>> +        required:
>>>> +          - reg
>>>> +          - i2c-alias
>>>> +          - ti,rx-mode
>>>> +          - serializer
>>>> +
>>>> +  ports:
>>>> +    $ref: /schemas/graph.yaml#/properties/ports
>>>> +
>>>> +    properties:
>>>> +      port@0:
>>>> +        $ref: /schemas/graph.yaml#/$defs/port-base
>>>> +        unevaluatedProperties: false
>>>> +        description: FPD-Link input 0
>>>> +
>>>> +        properties:
>>>> +          endpoint:
>>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>>> +            unevaluatedProperties: false
>>>> +            description:
>>>> +              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
>>>> +              hsync-active and vsync-active must be defined.
>>>> +
>>>> +      port@1:
>>>> +        $ref: /schemas/graph.yaml#/$defs/port-base
>>>> +        unevaluatedProperties: false
>>>> +        description: FPD-Link input 1
>>>> +
>>>> +        properties:
>>>> +          endpoint:
>>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>>> +            unevaluatedProperties: false
>>>> +            description:
>>>> +              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
>>>> +              hsync-active and vsync-active must be defined.
>>>> +
>>>> +      port@2:
>>>> +        $ref: /schemas/graph.yaml#/$defs/port-base
>>>> +        unevaluatedProperties: false
>>>> +        description: FPD-Link input 2
>>>> +
>>>> +        properties:
>>>> +          endpoint:
>>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>>> +            unevaluatedProperties: false
>>>> +            description:
>>>> +              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
>>>> +              hsync-active and vsync-active must be defined.
>>>> +
>>>> +      port@3:
>>>> +        $ref: /schemas/graph.yaml#/$defs/port-base
>>>> +        unevaluatedProperties: false
>>>> +        description: FPD-Link input 3
>>>> +
>>>> +        properties:
>>>> +          endpoint:
>>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>>> +            unevaluatedProperties: false
>>>> +            description:
>>>> +              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
>>>> +              hsync-active and vsync-active must be defined.
>>>> +
>>>> +      port@4:
>>>> +        $ref: /schemas/graph.yaml#/$defs/port-base
>>>> +        unevaluatedProperties: false
>>>> +        description: CSI-2 Output 0
>>>> +
>>>> +        properties:
>>>> +          endpoint:
>>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>>> +            unevaluatedProperties: false
>>>> +
>>>> +            properties:
>>>> +              data-lanes:
>>>> +                minItems: 1
>>>> +                maxItems: 4
>>>> +
>>>> +            required:
>>>> +              - data-lanes
>>>> +
>>>> +      port@5:
>>>> +        $ref: /schemas/graph.yaml#/$defs/port-base
>>>> +        unevaluatedProperties: false
>>>> +        description: CSI-2 Output 1
>>>> +
>>>> +        properties:
>>>> +          endpoint:
>>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>>> +            unevaluatedProperties: false
>>>> +
>>>> +            properties:
>>>> +              data-lanes:
>>>> +                minItems: 1
>>>> +                maxItems: 4
>>>> +
>>>> +            required:
>>>> +              - data-lanes
>>>
>>> I think you need
>>>
>>>       required:
>>>         - port@0
>>>         - port@1
>>>         - port@2
>>>         - port@3
>>>         - port@4
>>>         - port@5
>>
>> Is that needed? I think often some of the ports are unused (e.g. the
>> example in this yaml file). Is it customary to still require empty port
>> nodes in the DT?
> 
> Ports are an intrinsic property of a device, they don't depend on the
> device integration in the system. In this case, the UB960 has four
> FPD-Link inputs and two CSI-2 outputs, that's a property of the chip.
> They don't have to be connected to anything on the board, so endpooints
> are optional.

Yes, but why do they have to be required? A missing port node implies 
that it's not used, doesn't it? I don't mind much, it just feels a bit 
extra to add multiple almost empty "port@X { reg = <X>; };" style nodes 
to the dts file.

  Tomi