Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Subject: Re: [PATCH v4 net-next 0/5] add PLCA RS support and onsemi NCN26000
From:   patchwork-bot+netdevbpf@kernel.org
Message-Id: <167342821882.24876.7581626078662045769.git-patchwork-notify@kernel.org>
Date:   Wed, 11 Jan 2023 09:10:18 +0000
References: <cover.1673282912.git.piergiorgio.beruto@gmail.com>
In-Reply-To: <cover.1673282912.git.piergiorgio.beruto@gmail.com>
To:     Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Cc:     andrew@lunn.ch, hkallweit1@gmail.com, linux@armlinux.org.uk,
        davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
        pabeni@redhat.com, linux-kernel@vger.kernel.org,
        netdev@vger.kernel.org, o.rempel@pengutronix.de,
        mailhol.vincent@wanadoo.fr, sudheer.mogilappagari@intel.com,
        sbhatta@marvell.com, linux-doc@vger.kernel.org,
        wangjie125@huawei.com, corbet@lwn.net, lkp@intel.com,
        gal@nvidia.com, gustavoars@kernel.org, bagasdotme@gmail.com
Precedence: bulk

Hello:

This series was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Mon, 9 Jan 2023 17:59:25 +0100 you wrote:
> This patchset adds support for getting/setting the Physical Layer
> Collision Avoidace (PLCA) Reconciliation Sublayer (RS) configuration and
> status on Ethernet PHYs that supports it.
> 
> PLCA is a feature that provides improved media-access performance in terms
> of throughput, latency and fairness for multi-drop (P2MP) half-duplex PHYs.
> PLCA is defined in Clause 148 of the IEEE802.3 specifications as amended
> by 802.3cg-2019. Currently, PLCA is supported by the 10BASE-T1S single-pair
> Ethernet PHY defined in the same standard and related amendments. The OPEN
> Alliance SIG TC14 defines additional specifications for the 10BASE-T1S PHY,
> including a standard register map for PHYs that embeds the PLCA RS (see
> PLCA management registers at https://www.opensig.org/about/specifications/).
> 
> [...]

Here is the summary with links:
  - [v4,net-next,1/5] net/ethtool: add netlink interface for the PLCA RS
    https://git.kernel.org/netdev/net-next/c/8580e16c28f3
  - [v4,net-next,2/5] drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY
    https://git.kernel.org/netdev/net-next/c/16178c8ef53d
  - [v4,net-next,3/5] drivers/net/phy: add connection between ethtool and phylib for PLCA
    https://git.kernel.org/netdev/net-next/c/a23a1e57a677
  - [v4,net-next,4/5] drivers/net/phy: add helpers to get/set PLCA configuration
    https://git.kernel.org/netdev/net-next/c/493323416fed
  - [v4,net-next,5/5] drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY
    https://git.kernel.org/netdev/net-next/c/b53e7e8d8557

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html