Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20230104141245.8407-1-aford173@gmail.com>
In-Reply-To: <20230104141245.8407-1-aford173@gmail.com>
From:   Geert Uytterhoeven <geert@linux-m68k.org>
Date:   Wed, 11 Jan 2023 17:29:20 +0100
Message-ID: <CAMuHMdWuE4L6K4ULdVLZKeLwd3xYfzkyBNrf6s7Qc2kf9b-_Cg@mail.gmail.com>
Subject: Re: [PATCH 1/4] arm64: dts: beacon-renesom: Fix gpio expander reference
To:     Adam Ford <aford173@gmail.com>
Cc:     linux-renesas-soc@vger.kernel.org, aford@beaconembedded.com,
        Magnus Damm <magnus.damm@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi Adam,

On Wed, Jan 4, 2023 at 3:12 PM Adam Ford <aford173@gmail.com> wrote:
> The board used to originally introduce the Beacon Embedded
> RZ/G2[M/N/H] boards had a GPIO expander with address 20, but
> this was change when the final board went to production.
>
> The production boards changed both the part itself and
> the address.  With the incorrect address, the LCD cannot
> come up.  If the LCD fails, the rcar-du driver fails to come up,
> and that also breaks HDMI.
>
> Pre-release board were not shipped to the general public, so it
> should be safe to push this as a fix.  Anyone with a production
> board would have video fail due to this GPIO expander change.
>
> Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
> Signed-off-by: Adam Ford <aford173@gmail.com>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
> +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
> @@ -437,20 +437,6 @@ wm8962_endpoint: endpoint {
>                 };
>         };
>
> -       /* 0 - lcd_reset */
> -       /* 1 - lcd_pwr */
> -       /* 2 - lcd_select */
> -       /* 3 - backlight-enable */
> -       /* 4 - Touch_shdwn */
> -       /* 5 - LCD_H_pol */
> -       /* 6 - lcd_V_pol */
> -       gpio_exp1: gpio@20 {
> -               compatible = "onnn,pca9654";
> -               reg = <0x20>;
> -               gpio-controller;
> -               #gpio-cells = <2>;
> -       };
> -
>         touchscreen@26 {
>                 compatible = "ilitek,ili2117";
>                 reg = <0x26>;
> @@ -482,6 +468,21 @@ hd3ss3220_out_ep: endpoint {
>                         };
>                 };
>         };
> +
> +       gpio_exp1: gpio@70 {
> +               compatible = "onnn,pca9654";

According to the patch description, the actual part was changed, too?

> +               reg = <0x70>;
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +               gpio-line-names =
> +                       "lcd_reset",
> +                       "lcd_pwr",
> +                       "lcd_select",
> +                       "backlight-enable",
> +                       "Touch_shdwn",
> +                       "LCD_H_pol",
> +                       "lcd_V_pol";
> +       };
>  };

The rest LGTM.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds