Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 12 Jan 2023 09:25:01 -0600
From:   Bjorn Andersson <andersson@kernel.org>
To:     Abel Vesa <abel.vesa@linaro.org>
Cc:     Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v2 1/2] arm64: dts: qcom: sm8550: Add UFS host controller
 and phy nodes
Message-ID: <20230112152501.lwamtdsuufobof3c@builder.lan>
References: <20230112135926.1572191-1-abel.vesa@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230112135926.1572191-1-abel.vesa@linaro.org>
Precedence: bulk

On Thu, Jan 12, 2023 at 03:59:25PM +0200, Abel Vesa wrote:
> Add UFS host controller and PHY nodes.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> 
> Changes since v1:
>  * dropped ufs_mem_phy_lanes child node, like Johan suggested
>  * addressed Konrad comments.
> 
>  arch/arm64/boot/dts/qcom/sm8550.dtsi | 78 ++++++++++++++++++++++++++--
>  1 file changed, 75 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index 59756ec11564..d20b5fbcb2c3 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -649,9 +649,9 @@ gcc: clock-controller@100000 {
>  				 <0>,
>  				 <0>,
>  				 <0>,
> -				 <0>,
> -				 <0>,
> -				 <0>,
> +				 <&ufs_mem_phy 0>,
> +				 <&ufs_mem_phy 1>,
> +				 <&ufs_mem_phy 2>,
>  				 <0>;
>  		};
>  
> @@ -1571,6 +1571,78 @@ crypto: crypto@1de0000 {
>  			interconnect-names = "memory";
>  		};
>  
> +		ufs_mem_phy: phy@1d80000 {
> +			compatible = "qcom,sm8550-qmp-ufs-phy";
> +			reg = <0x0 0x01d80000 0x0 0x2000>;
> +			clock-names = "ref", "qref";
> +			clocks = <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
> +				 <&tcsr TCSR_UFS_CLKREF_EN>;
> +
> +			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
> +
> +			resets = <&ufs_mem_hc 0>;
> +			reset-names = "ufsphy";
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +
> +			#phy-cells = <0>;
> +
> +			#clock-cells = <1>;
> +
> +			ranges;

Isn't this a leftover from the older binding?

> +
> +			status = "disabled";
> +		};
> +
> +		ufs_mem_hc: ufshc@1d84000 {

ufs@ I believe.

> +			compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
> +				     "jedec,ufs-2.0";
> +			reg = <0x0 0x01d84000 0x0 0x3000>;
> +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> +			phys = <&ufs_mem_phy>;
> +			phy-names = "ufsphy";
> +			lanes-per-direction = <2>;
> +			#reset-cells = <1>;
> +			resets = <&gcc GCC_UFS_PHY_BCR>;
> +			reset-names = "rst";
> +
> +			power-domains = <&gcc UFS_PHY_GDSC>;
> +
> +			iommus = <&apps_smmu 0x60 0x0>;
> +
> +			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
> +
> +			interconnect-names = "ufs-ddr", "cpu-ufs";
> +			clock-names = "core_clk",
> +				      "bus_aggr_clk",
> +				      "iface_clk",
> +				      "core_clk_unipro",
> +				      "ref_clk",
> +				      "tx_lane0_sync_clk",
> +				      "rx_lane0_sync_clk",
> +				      "rx_lane1_sync_clk";
> +			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_UFS_PHY_AHB_CLK>,
> +				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> +				 <&rpmhcc RPMH_LN_BB_CLK3>,

ref_clk here represents the refclk to the memory device, which I believe
is what is the thing you have as <&tcsrcc TCSR_UFS_PAD_CLKREF_EN>.

> +				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> +			freq-table-hz =
> +				<75000000 300000000>,

GCC_UFS_PHY_AXI_CLK requires SM8550_CX (UFS_PHY_GDSC) to be voted to
nominal, so please ensure that this is done. (e.g. using required-opps)

Thanks,
Bjorn

> +				<0 0>,
> +				<0 0>,
> +				<75000000 300000000>,
> +				<100000000 403000000>,
> +				<0 0>,
> +				<0 0>,
> +				<0 0>;
> +			status = "disabled";
> +		};
> +
>  		tcsr_mutex: hwlock@1f40000 {
>  			compatible = "qcom,tcsr-mutex";
>  			reg = <0 0x01f40000 0 0x20000>;
> -- 
> 2.34.1
>