Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   shravan kumar <shravan.chippa@microchip.com>
To:     <paul.j.murphy@intel.com>, <daniele.alessandrelli@intel.com>,
        <mchehab@kernel.org>
CC:     <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        "shravan kumar" <shravan.chippa@microchip.com>,
        Jacopo Mondi <jacopo@jmondi.org>,
        Sakari Ailus <sakari.ailus@iki.fi>
Subject: [PATCH v9 0/4] media: i2c: imx334: support lower bandwidth mode
Date:   Fri, 13 Jan 2023 06:31:31 +0530
Message-ID: <20230113010135.2620818-1-shravan.chippa@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Shravan Chippa <shravan.chippa@microchip.com>

Hi

This patch series is for imx334 sensor driver support for lower bandwidth

Some platforms may not be capable of supporting the bandwidth
required for 12 bit or 3840x2160@60 resolutions.

Add support for dynamically selecting 10 bit and 1920x1080@30
resolutions while leaving the existing configuration as default


V8 -> V9
-Updated all array values with samall later to get unifamity
in mode array values
-corrected hblank_min, hbalank, pix_clk for 1920x1080@30 updated 
according to link frequency
-corrected mutex use for imx334_get_format_code function 
-corrected the fmt->format.code value assinment
-in function imx334_get_format_code variable "i" value comparision
corrected

V7 -> V8
-patch drop "mimx334-odify-link-frequency" as per the commnets
linkfrquncy will be half of the line bandwidth

-changed 1920x1080@30 mode link frequency from (891000000Mbps) 
to (445500000Mbps). linkfrquncy will be half of the line bandwidth


V6 -> V7
Reloved: kernel test robot warning
"drivers/media/i2c/imx334.c:767:15: warning: unused variable 'i' "

V5 -> V6
-Drop the dt-binding patch
-Optimize the code to avoid duplicating the lines
-Added proper mutex while imx334_mbus_codes array
-Modified Function __v4l2_ctrl_modify_range arguments as per the review
commants
-Added hblank dummy set ctrl
-Removed Redundant comment
-corrected code alignment 
-All commit msgs are re-written

V4 -> V5
-Added 5 more patchs as per the review comments witch has below updates
-Updated 1782000000Mbps link frequency for 3840x2160@60 as per the mode
values
-Updated 1782000000Mbps link frequency in dt-bindings also
-Updated 3840x2160@60 mode array with default(reset) values

-Updated hblank __v4l2_ctrl_s_ctrl() to __v4l2_ctrl_modify_range()
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>

-Current mode update only when we try to set V4L2_SUBDEV_FORMAT_ACTIVE
-Added link frequency (891000000Mbps) and pixel rate (74250000) to
1920x1080@30 mode
Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>

-Updated commit message

V3 -> V4
- Make the 12 bit and 3840x2160 as default
- Set bus code SRGGB12 if set format fails

V2 -> V3
- Fixed the warning reported by kernel test robot

V1 -> V2
- Addressed the review comment given by Jacopo Mondi,
  Which has bug in imx334_enum_frame_size() loop function,


Shravan Chippa (4):
  media: i2c: imx334: replace __v4l2_ctrl_s_ctrl to
    __v4l2_ctrl_modify_range
  media: i2c: imx334: add missing reset values for mode 3840x2160_regs[]
  media: i2c: imx334: support lower bandwidth mode
  media: i2c: imx334: update pixel and link frequency

 drivers/media/i2c/imx334.c | 339 +++++++++++++++++++++++++++++++++----
 1 file changed, 309 insertions(+), 30 deletions(-)

-- 
2.34.1