Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 14 Jan 2023 22:53:51 +0200
From:   Vladimir Oltean <olteanv@gmail.com>
To:     Jerry Ray <jerry.ray@microchip.com>
Cc:     Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Russell King <linux@armlinux.org.uk>, jbe@pengutronix.de,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v6 5/6] dsa: lan9303: Port 0 is xMII port
Message-ID: <20230114205351.czy2fkfrulrl4w6k@skbuf>
References: <20230109211849.32530-1-jerry.ray@microchip.com>
 <20230109211849.32530-6-jerry.ray@microchip.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230109211849.32530-6-jerry.ray@microchip.com>
Precedence: bulk

On Mon, Jan 09, 2023 at 03:18:48PM -0600, Jerry Ray wrote:
> In preparing to move the adjust_link logic into the phylink_mac_link_up
> api, change the macro used to check for the cpu port. In
> phylink_mac_link_up, the phydev pointer passed in for the CPU port is
> NULL, so we can't keep using phy_is_pseudo_fixed_link(phydev).
> 
> Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
> ---
> v5->v6:
>   Using port 0 to identify the xMII port on the LAN9303.
> ---
>  drivers/net/dsa/lan9303-core.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
> index 792ce6a26a6a..7be4c491e5d9 100644
> --- a/drivers/net/dsa/lan9303-core.c
> +++ b/drivers/net/dsa/lan9303-core.c
> @@ -1063,7 +1063,11 @@ static void lan9303_adjust_link(struct dsa_switch *ds, int port,
>  {
>  	int ctl;
>  
> -	if (!phy_is_pseudo_fixed_link(phydev))
> +	/* On this device, we are only interested in doing something here if
> +	 * this is an xMII port. All other ports are 10/100 phys using MDIO
> +	 * to control there link settings.
> +	 */
> +	if (port != 0)

Maybe a macro LAN9303_XMII_PORT would be good, if it was also
consistently used in lan9303_setup()?

>  		return;
>  
>  	ctl = lan9303_phy_read(ds, port, MII_BMCR);
> -- 
> 2.17.1
>