Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 14 Jan 2023 22:49:43 +0200
From:   Vladimir Oltean <olteanv@gmail.com>
To:     Jerry Ray <jerry.ray@microchip.com>
Cc:     Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Russell King <linux@armlinux.org.uk>, jbe@pengutronix.de,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v6 2/6] dsa: lan9303: move Turbo Mode bit init
Message-ID: <20230114204943.jncpislrqjqvinie@skbuf>
References: <20230109211849.32530-1-jerry.ray@microchip.com>
 <20230109211849.32530-1-jerry.ray@microchip.com>
 <20230109211849.32530-3-jerry.ray@microchip.com>
 <20230109211849.32530-3-jerry.ray@microchip.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230109211849.32530-3-jerry.ray@microchip.com>
 <20230109211849.32530-3-jerry.ray@microchip.com>
Precedence: bulk

On Mon, Jan 09, 2023 at 03:18:45PM -0600, Jerry Ray wrote:
> In preparing to remove the .adjust_link api, I am moving the one-time
> initialization of the device's Turbo Mode bit into a different execution
> path. This code clears (disables) the Turbo Mode bit which is never used
> by this driver. Turbo Mode is a non-standard mode that would allow the
> 100Mbps RMII interface to run at 200Mbps.
> 
> Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
> ---
>  drivers/net/dsa/lan9303-core.c | 15 ++++++---------
>  1 file changed, 6 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
> index 5a21fc96d479..50470fb09cb4 100644
> --- a/drivers/net/dsa/lan9303-core.c
> +++ b/drivers/net/dsa/lan9303-core.c
> @@ -886,6 +886,12 @@ static int lan9303_check_device(struct lan9303 *chip)
>  		return ret;
>  	}
>  
> +	/* Virtual Phy: Remove Turbo 200Mbit mode */
> +	lan9303_read(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, &reg);
> +
> +	reg &= ~LAN9303_VIRT_SPECIAL_TURBO;
> +	regmap_write(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, reg);
> +

Isn't a function whose name is lan9303_check_device() being abused for
this purpose (device initialization)?

>  	return 0;
>  }
>  
> @@ -1050,7 +1056,6 @@ static int lan9303_phy_write(struct dsa_switch *ds, int phy, int regnum,
>  static void lan9303_adjust_link(struct dsa_switch *ds, int port,
>  				struct phy_device *phydev)
>  {
> -	struct lan9303 *chip = ds->priv;
>  	int ctl;
>  
>  	if (!phy_is_pseudo_fixed_link(phydev))
> @@ -1073,14 +1078,6 @@ static void lan9303_adjust_link(struct dsa_switch *ds, int port,
>  		ctl &= ~BMCR_FULLDPLX;
>  
>  	lan9303_phy_write(ds, port, MII_BMCR, ctl);
> -
> -	if (port == chip->phy_addr_base) {
> -		/* Virtual Phy: Remove Turbo 200Mbit mode */
> -		lan9303_read(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, &ctl);
> -
> -		ctl &= ~LAN9303_VIRT_SPECIAL_TURBO;
> -		regmap_write(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, ctl);
> -	}
>  }
>  
>  static int lan9303_port_enable(struct dsa_switch *ds, int port,
> -- 
> 2.17.1
>