Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <2ebbe66f-fc98-3be2-1f93-857f0025e75e@linaro.org>
Date:   Sun, 15 Jan 2023 15:58:05 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.6.1
Subject: Re: [PATCH] ARM: dts: omap: gta04: add BNO055 IMU chip
Content-Language: en-US
To:     Andreas Kemnade <andreas@kemnade.info>, bcousson@baylibre.com,
        tony@atomide.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linux-omap@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20230113221058.2355840-1-andreas@kemnade.info>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230113221058.2355840-1-andreas@kemnade.info>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 13/01/2023 23:10, Andreas Kemnade wrote:
> There is finally a driver upstreamed, so add the
> device.
> 
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
>  arch/arm/boot/dts/omap3-gta04a5.dts | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
> index 0b5bd7388877..4f56f7fc0d1b 100644
> --- a/arch/arm/boot/dts/omap3-gta04a5.dts
> +++ b/arch/arm/boot/dts/omap3-gta04a5.dts
> @@ -75,6 +75,11 @@ OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
>  		>;
>  	};
>  
> +	bno050_pins: pinmux-bno050-pins {
> +		pinctrl-single,pins = <
> +			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT | MUX_MODE4) /* gpin113 */
> +		>;
> +	};
>  };
>  
>  /*
> @@ -136,4 +141,13 @@ bme280@76 {
>  		vdda-supply = <&vio>;
>  		vddd-supply = <&vio>;
>  	};
> +
> +	bno055@29 {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +		compatible = "bosch,bno055";
> +		reg = <0x29>;

Best regards,
Krzysztof