Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <b112ee8e-93ab-2c30-ced3-82ff858884b4@linaro.org>
Date:   Wed, 18 Jan 2023 09:29:25 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.6.0
From:   Neil Armstrong <neil.armstrong@linaro.org>
Reply-To: neil.armstrong@linaro.org
Subject: Re: [PATCH v2 7/9] arm64: dts: amlogic: Used onboard usb hub reset on
 odroid c4
Content-Language: en-US
To:     Anand Moon <linux.amoon@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Kevin Hilman <khilman@baylibre.com>,
        Jerome Brunet <jbrunet@baylibre.com>,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc:     linux-amlogic@lists.infradead.org,
        Matthias Kaehlcke <mka@chromium.org>,
        Alexander Stein <alexander.stein@ew.tq-group.com>,
        Johan Hovold <johan@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
References: <20230118044418.875-1-linux.amoon@gmail.com>
 <20230118044418.875-8-linux.amoon@gmail.com>
Organization: Linaro Developer Services
In-Reply-To: <20230118044418.875-8-linux.amoon@gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 18/01/2023 05:44, Anand Moon wrote:
> On Odroid c4 previously use gpio-hog to reset the usb hub,
> switch to used on-board usb hub reset to enable the usb hub
> and enable power to hub.
> 
> USB hub is combination of USB 2.0 and USB 3.0 root hub so
> use peer-hub node to link then.
> 
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> v2: - fix the compatible string.
>      - Fix the hub node to use peer-hub to link the usb 2.0 and usb 3.0.
> ---
>   .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 36 ++++++++++++-------
>   1 file changed, 23 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
> index 8c30ce63686e..d04768a66bfe 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
> @@ -26,20 +26,30 @@ led-blue {
>   	sound {
>   		model = "ODROID-C4";
>   	};
> -};
>   
> -&gpio {
> -	/*
> -	 * WARNING: The USB Hub on the Odroid-C4 needs a reset signal
> -	 * to be turned high in order to be detected by the USB Controller
> -	 * This signal should be handled by a USB specific power sequence
> -	 * in order to reset the Hub when USB bus is powered down.
> -	 */
> -	hog-0 {
> -		gpio-hog;
> -		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
> -		output-high;
> -		line-name = "usb-hub-reset";
> +	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
> +	usb-hub {
> +		dr_mode = "host";

Is this really needed ?

> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* 2.0 hub on port 1 */
> +		hub_2_0: hub@1 {
> +			compatible = "usb2109,2817";
> +			reg = <1>;
> +			peer-hub = <&hub_3_0>;
> +			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
> +			vdd-supply = <&vcc_5v>;
> +		};
> +
> +		/* 3.1 hub on port 4 */
> +		hub_3_0: hub@2 {
> +			compatible = "usb2109,817";
> +			reg = <2>;
> +			peer-hub = <&hub_2_0>;
> +			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
> +			vdd-supply = <&vcc_5v>;
> +		};

The final discussion in v1 was to drop this /usb-hub node and move the
hub_2_0 & hub_3_0 node under the dwc3 node.

Neil

>   	};
>   };
>