Received: by 2002:a05:6358:a55:b0:ec:fcf4:3ecf with SMTP id 21csp6441762rwb; Wed, 18 Jan 2023 05:21:34 -0800 (PST) X-Google-Smtp-Source: AMrXdXsJqoRwvpoXTY03dFIQ0M8wGv/eBufJuZ3XxBd5c58hGGfczTRQvaO01wePn/mEJDMsWKuo X-Received: by 2002:a17:906:2798:b0:870:97f1:3877 with SMTP id j24-20020a170906279800b0087097f13877mr3081290ejc.53.1674048094327; Wed, 18 Jan 2023 05:21:34 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1674048094; cv=none; d=google.com; s=arc-20160816; b=Q9CYn6tae0vSNX7y5OH4zPa1G8hoc/e4hcKnbAbwr/jIZM6EoTt9NCEYlMZbKbrhRL kk5qhKeVZ24AJN6SGpaD3tel4XfLRleormd/yLDXNHjzB/G7yCtvNwZgwDzv8w3/9nfl 1jdopTlXZF3shpCsTKX0J53lZkP+Zuq8IA1AdnBb8dYsh9wMFfvryc2Tbpx17mZkAj3S uJVCzpKPreK0LbBmKR7JWep9GiKLG7D4UJ3X6XlqrV9cIXThY6LKR0BrctWmUIln6lbH RzuJOIi0n55cp1w1plM7DBOtNZhDf2QkLwHKvgPBB+kxDOo0xoh08PbaYODwI5qnudFv o4JQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :message-id:date:subject:cc:to:from:dkim-signature; bh=JGxnO17O/nXxnQSYk4yEfYS9OFl8n1cALezHTwi8q6g=; b=fh1O9wKMtsDP/DLIsLWQ5N5mMXRgb8VRQFDZFbX94RPQyT2patQGRjZLcNTx8iiei2 ooHct8Y0oocI+unY/HAM3a9j9+Li312YtHnYVbw+WYOoEPnSqq7ApMD7hO6RVZVhUINS WIeQG6XPkxTErbO4rC9B95B/b6cXME52LBZmzuZ7Jx/S9EdM4GCkCNovkuf4b1pi2PAN 4jl2fXikMWcKhAiOvzm2YYLvIkMNP8VGC7BIWMYv2ldgJcpa2/OIqel7tserimuVBtGq 1L3UP3RgOE8BwkyTkSQvtY02maKZLoTDUEG7QIb2GspFI08eeAKjNBv1f1VlAzEs6j+K C08g== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b=lXdYuG88; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id dm3-20020a170907948300b007da4fe085d4si6129316ejc.694.2023.01.18.05.21.22; Wed, 18 Jan 2023 05:21:34 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b=lXdYuG88; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229627AbjARNR0 (ORCPT + 45 others); Wed, 18 Jan 2023 08:17:26 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46676 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229888AbjARNQW (ORCPT ); Wed, 18 Jan 2023 08:16:22 -0500 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1012E7D651; Wed, 18 Jan 2023 04:40:59 -0800 (PST) Received: from desky.lan (91-154-32-225.elisa-laajakaista.fi [91.154.32.225]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 78005188D; Wed, 18 Jan 2023 13:40:55 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1674045656; bh=fuJiYqY9s2sFHlnBRxhSmatb7zhGB9NfP0gFrwqDISw=; h=From:To:Cc:Subject:Date:From; b=lXdYuG88SqpjNZTy1UEG9ZKBvYwCHwypS/Dolt6ymkAV/DbBuf1p4OocBhgNbziCC gzGFZW+0KjXYVj6a3rWwiFdno1PCbfdIRy1YALNN7Guc/jspIFob+4duIDiZkTxFnC 8y4SQeinM4uaAnUj5Pq0WFkJwKq5gy0/D2RvkRzY= From: Tomi Valkeinen To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, Rob Herring , Krzysztof Kozlowski , Wolfram Sang , Luca Ceresoli , Andy Shevchenko , Matti Vaittinen , Laurent Pinchart Cc: Mauro Carvalho Chehab , Peter Rosin , Liam Girdwood , Mark Brown , Sakari Ailus , Michael Tretter , Shawn Tu , Hans Verkuil , Mike Pagano , =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= , Marek Vasut , Tomi Valkeinen Subject: [PATCH v7 0/7] i2c-atr and FPDLink Date: Wed, 18 Jan 2023 14:40:24 +0200 Message-Id: <20230118124031.788940-1-tomi.valkeinen@ideasonboard.com> X-Mailer: git-send-email 2.34.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,SPF_PASS, T_FILL_THIS_FORM_SHORT autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, You can find the v6 from: https://lore.kernel.org/all/20230105140307.272052-1-tomi.valkeinen@ideasonboard.com/ Main changes: * i2c-atr: Use bus notifier. This allows us to drop the patch that adds the attach_client/detach_client callbacks. On the downside, it removes the option for error handling if the translation setup fails, and also doesn't provide us the pointer to the i2c_board_info. I belive both are acceptable downsides. * Use fwnode in the fpdlink drivers instead of OF * Addressed all the review comments (I hope) * Lots of cosmetic or minor fixes which I came up while doing the fwnode change Diff to v6 below. Tomi Luca Ceresoli (1): i2c: add I2C Address Translator (ATR) support Tomi Valkeinen (6): dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer media: i2c: add DS90UB960 driver media: i2c: add DS90UB913 driver media: i2c: add DS90UB953 driver .../bindings/media/i2c/ti,ds90ub913.yaml | 133 + .../bindings/media/i2c/ti,ds90ub953.yaml | 134 + .../bindings/media/i2c/ti,ds90ub960.yaml | 425 ++ Documentation/i2c/index.rst | 1 + Documentation/i2c/muxes/i2c-atr.rst | 83 + MAINTAINERS | 16 + drivers/i2c/Kconfig | 9 + drivers/i2c/Makefile | 1 + drivers/i2c/i2c-atr.c | 547 +++ drivers/media/i2c/Kconfig | 47 + drivers/media/i2c/Makefile | 3 + drivers/media/i2c/ds90ub913.c | 848 ++++ drivers/media/i2c/ds90ub953.c | 1576 ++++++ drivers/media/i2c/ds90ub960.c | 4254 +++++++++++++++++ include/linux/i2c-atr.h | 117 + include/media/i2c/ds90ub9xx.h | 16 + 16 files changed, 8210 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml create mode 100644 Documentation/i2c/muxes/i2c-atr.rst create mode 100644 drivers/i2c/i2c-atr.c create mode 100644 drivers/media/i2c/ds90ub913.c create mode 100644 drivers/media/i2c/ds90ub953.c create mode 100644 drivers/media/i2c/ds90ub960.c create mode 100644 include/linux/i2c-atr.h create mode 100644 include/media/i2c/ds90ub9xx.h Interdiff against v6: diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml index 664799ae55be..1ba22450cdba 100644 --- a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml @@ -88,7 +88,7 @@ properties: - 4 # CSI2 NON-SYNC description: FPD-Link Input Mode. This should reflect the hardware and the - default mode of the connected camera module. + default mode of the connected device. ti,cdr-mode: $ref: /schemas/types.yaml#/definitions/uint32 @@ -97,7 +97,7 @@ properties: - 1 # FPD-Link IV description: FPD-Link CDR Mode. This should reflect the hardware and the - default mode of the connected camera module. + default mode of the connected device. ti,strobe-pos: $ref: /schemas/types.yaml#/definitions/int32 @@ -212,6 +212,14 @@ properties: required: - data-lanes + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + required: - compatible - reg @@ -265,6 +273,16 @@ examples: }; }; + /* Port 2, unused */ + port@2 { + reg = <2>; + }; + + /* Port 3, unused */ + port@3 { + reg = <3>; + }; + /* Port 4, CSI-2 TX */ port@4 { reg = <4>; @@ -274,6 +292,11 @@ examples: remote-endpoint = <&csi2_phy0>; }; }; + + /* Port 5, unused */ + port@5 { + reg = <5>; + }; }; links { diff --git a/drivers/i2c/i2c-atr.c b/drivers/i2c/i2c-atr.c index 0668c98886ad..1d43cf3824eb 100644 --- a/drivers/i2c/i2c-atr.c +++ b/drivers/i2c/i2c-atr.c @@ -80,6 +80,8 @@ struct i2c_atr { struct mutex lock; int max_adapters; + struct notifier_block i2c_nb; + struct i2c_adapter *adapter[]; }; @@ -272,7 +274,6 @@ static const struct i2c_lock_operations i2c_atr_lock_ops = { }; static int i2c_atr_attach_client(struct i2c_adapter *adapter, - const struct i2c_board_info *info, const struct i2c_client *client) { struct i2c_atr_chan *chan = adapter->algo_data; @@ -285,8 +286,7 @@ static int i2c_atr_attach_client(struct i2c_adapter *adapter, if (!c2a) return -ENOMEM; - ret = atr->ops->attach_client(atr, chan->chan_id, info, client, - &alias_id); + ret = atr->ops->attach_client(atr, chan->chan_id, client, &alias_id); if (ret) goto err_free; @@ -318,15 +318,53 @@ static void i2c_atr_detach_client(struct i2c_adapter *adapter, } } -static const struct i2c_attach_operations i2c_atr_attach_ops = { - .attach_client = i2c_atr_attach_client, - .detach_client = i2c_atr_detach_client, -}; +static int i2c_atr_bus_notifier_call(struct notifier_block *nb, + unsigned long event, void *device) +{ + struct i2c_atr *atr = container_of(nb, struct i2c_atr, i2c_nb); + struct device *dev = device; + struct i2c_client *client; + u32 chan_id; + int ret; + + client = i2c_verify_client(dev); + if (!client) + return NOTIFY_DONE; + + /* Is the client in one of our adapters? */ + for (chan_id = 0; chan_id < atr->max_adapters; ++chan_id) { + if (client->adapter == atr->adapter[chan_id]) + break; + } + + if (chan_id == atr->max_adapters) + return NOTIFY_DONE; + + switch (event) { + case BUS_NOTIFY_ADD_DEVICE: + ret = i2c_atr_attach_client(client->adapter, client); + if (ret) + dev_err(atr->dev, + "Failed to attach remote client '%s': %d\n", + dev_name(dev), ret); + break; + + case BUS_NOTIFY_DEL_DEVICE: + i2c_atr_detach_client(client->adapter, client); + break; + + default: + break; + } + + return NOTIFY_DONE; +} struct i2c_atr *i2c_atr_new(struct i2c_adapter *parent, struct device *dev, const struct i2c_atr_ops *ops, int max_adapters) { struct i2c_atr *atr; + int ret; if (max_adapters > ATR_MAX_ADAPTERS) return ERR_PTR(-EINVAL); @@ -352,12 +390,20 @@ struct i2c_atr *i2c_atr_new(struct i2c_adapter *parent, struct device *dev, atr->algo.smbus_xfer = i2c_atr_smbus_xfer; atr->algo.functionality = i2c_atr_functionality; + atr->i2c_nb.notifier_call = i2c_atr_bus_notifier_call; + ret = bus_register_notifier(&i2c_bus_type, &atr->i2c_nb); + if (ret) { + mutex_destroy(&atr->lock); + return ERR_PTR(ret); + } + return atr; } EXPORT_SYMBOL_NS_GPL(i2c_atr_new, I2C_ATR); void i2c_atr_delete(struct i2c_atr *atr) { + bus_unregister_notifier(&i2c_bus_type, &atr->i2c_nb); mutex_destroy(&atr->lock); } EXPORT_SYMBOL_NS_GPL(i2c_atr_delete, I2C_ATR); @@ -400,7 +446,6 @@ int i2c_atr_add_adapter(struct i2c_atr *atr, u32 chan_id, chan->adap.timeout = parent->timeout; chan->adap.quirks = parent->quirks; chan->adap.lock_ops = &i2c_atr_lock_ops; - chan->adap.attach_ops = &i2c_atr_attach_ops; if (bus_handle) { device_set_node(&chan->adap.dev, fwnode_handle_get(bus_handle)); @@ -423,6 +468,8 @@ int i2c_atr_add_adapter(struct i2c_atr *atr, u32 chan_id, fwnode_handle_put(atr_node); } + atr->adapter[chan_id] = &chan->adap; + ret = i2c_add_adapter(&chan->adap); if (ret) { dev_err(dev, "failed to add atr-adapter %u (error=%d)\n", @@ -442,8 +489,6 @@ int i2c_atr_add_adapter(struct i2c_atr *atr, u32 chan_id, dev_dbg(dev, "Added ATR child bus %d\n", i2c_adapter_id(&chan->adap)); - atr->adapter[chan_id] = &chan->adap; - return 0; err_fwnode_put: @@ -468,14 +513,15 @@ void i2c_atr_del_adapter(struct i2c_atr *atr, u32 chan_id) dev_dbg(dev, "Removing ATR child bus %d\n", i2c_adapter_id(adap)); - atr->adapter[chan_id] = NULL; - snprintf(symlink_name, sizeof(symlink_name), "channel-%u", chan->chan_id); sysfs_remove_link(&dev->kobj, symlink_name); sysfs_remove_link(&chan->adap.dev.kobj, "atr_device"); i2c_del_adapter(adap); + + atr->adapter[chan_id] = NULL; + fwnode_handle_put(fwnode); mutex_destroy(&chan->orig_addrs_lock); kfree(chan->orig_addrs); diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 8a0888ba89e5..7539b0740351 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -916,7 +916,6 @@ int i2c_dev_irq_from_resources(const struct resource *resources, struct i2c_client * i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info) { - const struct i2c_attach_operations *attach_ops; struct i2c_client *client; int status; @@ -968,24 +967,15 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf } } - attach_ops = adap->attach_ops; - - if (attach_ops && attach_ops->attach_client && - attach_ops->attach_client(adap, info, client)) - goto out_remove_swnode; - status = device_register(&client->dev); if (status) - goto out_detach_client; + goto out_remove_swnode; dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n", client->name, dev_name(&client->dev)); return client; -out_detach_client: - if (attach_ops && attach_ops->detach_client) - attach_ops->detach_client(adap, client); out_remove_swnode: device_remove_software_node(&client->dev); out_err_put_of_node: @@ -1007,18 +997,9 @@ EXPORT_SYMBOL_GPL(i2c_new_client_device); */ void i2c_unregister_device(struct i2c_client *client) { - const struct i2c_attach_operations *attach_ops; - struct i2c_adapter *adap; - if (IS_ERR_OR_NULL(client)) return; - adap = client->adapter; - attach_ops = adap->attach_ops; - - if (attach_ops && attach_ops->detach_client) - attach_ops->detach_client(adap, client); - if (client->dev.of_node) { of_node_clear_flag(client->dev.of_node, OF_POPULATED); of_node_put(client->dev.of_node); diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 29594c724307..0590312ec751 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -1602,40 +1602,40 @@ endmenu menu "Video serializers and deserializers" config VIDEO_DS90UB913 - tristate "TI DS90UB913 Serializer" + tristate "TI DS90UB913 FPD-Link III Serializer" depends on OF && I2C && VIDEO_DEV + select I2C_ATR select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_FWNODE - select REGMAP_I2C select OF_GPIO - select I2C_ATR + select REGMAP_I2C + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API help Device driver for the Texas Instruments DS90UB913 FPD-Link III Serializer. config VIDEO_DS90UB953 - tristate "TI DS90UB953 Serializer" + tristate "TI FPD-Link III/IV CSI-2 Serializers" depends on OF && I2C && VIDEO_DEV + select I2C_ATR select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_FWNODE - select REGMAP_I2C select OF_GPIO - select I2C_ATR + select REGMAP_I2C + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API help Device driver for the Texas Instruments DS90UB953 FPD-Link III Serializer and DS90UB971 FPD-Link IV Serializer. config VIDEO_DS90UB960 - tristate "TI DS90UB960 Deserializer" + tristate "TI FPD-Link III/IV Deserializers" depends on OF && I2C && VIDEO_DEV + select I2C_ATR select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_FWNODE - select REGMAP_I2C select OF_GPIO - select I2C_ATR + select REGMAP_I2C + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API help Device driver for the Texas Instruments DS90UB960 FPD-Link III Deserializer and DS90UB9702 FPD-Link IV Deserializer. diff --git a/drivers/media/i2c/ds90ub913.c b/drivers/media/i2c/ds90ub913.c index 0a60afb09cd3..befa78128a9a 100644 --- a/drivers/media/i2c/ds90ub913.c +++ b/drivers/media/i2c/ds90ub913.c @@ -5,19 +5,19 @@ * Based on a driver from Luca Ceresoli * * Copyright (c) 2019 Luca Ceresoli - * Copyright (c) 2022 Tomi Valkeinen + * Copyright (c) 2023 Tomi Valkeinen */ #include #include #include +#include #include #include #include #include #include -#include -#include +#include #include #include @@ -41,8 +41,9 @@ #define UB913_REG_GENERAL_CFG_PCLK_RISING BIT(0) #define UB913_REG_MODE_SEL 0x05 -#define UB913_REG_MODE_SEL_MODE_UP_TO_DATE BIT(4) #define UB913_REG_MODE_SEL_MODE_OVERRIDE BIT(5) +#define UB913_REG_MODE_SEL_MODE_UP_TO_DATE BIT(4) +#define UB913_REG_MODE_SEL_MODE_MASK GENMASK(3, 0) #define UB913_REG_CRC_ERRORS_LSB 0x0a #define UB913_REG_CRC_ERRORS_MSB 0x0b @@ -67,7 +68,6 @@ struct ub913_data { struct clk *clkin; struct gpio_chip gpio_chip; - char gpio_chip_name[64]; struct v4l2_subdev sd; struct media_pad pads[2]; @@ -75,11 +75,10 @@ struct ub913_data { struct v4l2_async_notifier notifier; struct v4l2_subdev *source_sd; + u16 source_sd_pad; u64 enabled_source_streams; - struct device_node *tx_ep_np; - struct clk_hw *clkout_clk_hw; struct ds90ub9xx_platform_data *plat_data; @@ -132,20 +131,14 @@ static int ub913_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, int value) { struct ub913_data *priv = gpiochip_get_data(gc); - unsigned int reg_idx; - unsigned int field_idx; - int ret; - - reg_idx = offset / 2; - field_idx = offset % 2; - - ret = regmap_update_bits( - priv->regmap, UB913_REG_GPIO_CFG(reg_idx), - UB913_REG_GPIO_CFG_MASK(field_idx), - UB913_REG_GPIO_CFG_ENABLE(field_idx) | - (value ? UB913_REG_GPIO_CFG_OUT_VAL(field_idx) : 0)); - - return ret; + unsigned int reg_idx = offset / 2; + unsigned int field_idx = offset % 2; + + return regmap_update_bits(priv->regmap, UB913_REG_GPIO_CFG(reg_idx), + UB913_REG_GPIO_CFG_MASK(field_idx), + UB913_REG_GPIO_CFG_ENABLE(field_idx) | + (value ? UB913_REG_GPIO_CFG_OUT_VAL(field_idx) : + 0)); } static void ub913_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) @@ -172,20 +165,16 @@ static int ub913_gpiochip_probe(struct ub913_data *priv) /* Initialize GPIOs 0 and 1 to local control, tri-state */ ub913_write(priv, UB913_REG_GPIO_CFG(0), 0); - scnprintf(priv->gpio_chip_name, sizeof(priv->gpio_chip_name), "%s", - dev_name(dev)); - - gc->label = priv->gpio_chip_name; + gc->label = dev_name(dev); gc->parent = dev; gc->owner = THIS_MODULE; gc->base = -1; - gc->can_sleep = 1; + gc->can_sleep = true; gc->ngpio = UB913_NUM_GPIOS; gc->get_direction = ub913_gpio_get_direction; gc->direction_output = ub913_gpio_direction_out; gc->set = ub913_gpio_set; gc->of_xlate = ub913_gpio_of_xlate; - gc->of_node = priv->client->dev.of_node; gc->of_gpio_n_cells = 2; ret = gpiochip_add_data(gc, priv); @@ -219,19 +208,14 @@ static int ub913_enable_streams(struct v4l2_subdev *sd, u64 streams_mask) { struct ub913_data *priv = sd_to_ub913(sd); - struct media_pad *remote_pad; u64 sink_streams; int ret; - if (streams_mask & priv->enabled_source_streams) - return -EALREADY; - - sink_streams = v4l2_subdev_state_xlate_streams( - state, UB913_PAD_SOURCE, UB913_PAD_SINK, &streams_mask); - - remote_pad = media_pad_remote_pad_first(&priv->pads[UB913_PAD_SINK]); + sink_streams = v4l2_subdev_state_xlate_streams(state, UB913_PAD_SOURCE, + UB913_PAD_SINK, + &streams_mask); - ret = v4l2_subdev_enable_streams(priv->source_sd, remote_pad->index, + ret = v4l2_subdev_enable_streams(priv->source_sd, priv->source_sd_pad, sink_streams); if (ret) return ret; @@ -246,19 +230,14 @@ static int ub913_disable_streams(struct v4l2_subdev *sd, u64 streams_mask) { struct ub913_data *priv = sd_to_ub913(sd); - struct media_pad *remote_pad; - int ret; u64 sink_streams; + int ret; - if ((streams_mask & priv->enabled_source_streams) != streams_mask) - return -EALREADY; - - sink_streams = v4l2_subdev_state_xlate_streams( - state, UB913_PAD_SOURCE, UB913_PAD_SINK, &streams_mask); - - remote_pad = media_pad_remote_pad_first(&priv->pads[UB913_PAD_SINK]); + sink_streams = v4l2_subdev_state_xlate_streams(state, UB913_PAD_SOURCE, + UB913_PAD_SINK, + &streams_mask); - ret = v4l2_subdev_disable_streams(priv->source_sd, remote_pad->index, + ret = v4l2_subdev_disable_streams(priv->source_sd, priv->source_sd_pad, sink_streams); if (ret) return ret; @@ -317,24 +296,6 @@ static int ub913_set_routing(struct v4l2_subdev *sd, return _ub913_set_routing(sd, state, routing); } -static int ub913_get_source_frame_desc(struct ub913_data *priv, - struct v4l2_mbus_frame_desc *desc) -{ - struct media_pad *pad; - int ret; - - pad = media_pad_remote_pad_first(&priv->pads[UB913_PAD_SINK]); - if (!pad) - return -EPIPE; - - ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, pad->index, - desc); - if (ret) - return ret; - - return 0; -} - static int ub913_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, struct v4l2_mbus_frame_desc *fd) { @@ -348,27 +309,29 @@ static int ub913_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, if (pad != UB913_PAD_SOURCE) return -EINVAL; - ret = ub913_get_source_frame_desc(priv, &source_fd); + ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, + priv->source_sd_pad, &source_fd); if (ret) return ret; - state = v4l2_subdev_lock_and_get_active_state(sd); - - routing = &state->routing; - memset(fd, 0, sizeof(*fd)); fd->type = V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL; + state = v4l2_subdev_lock_and_get_active_state(sd); + + routing = &state->routing; + for_each_active_route(routing, route) { unsigned int i; if (route->source_pad != pad) continue; - for (i = 0; i < source_fd.num_entries; ++i) + for (i = 0; i < source_fd.num_entries; ++i) { if (source_fd.entry[i].stream == route->sink_stream) break; + } if (i == source_fd.num_entries) { dev_err(&priv->client->dev, @@ -454,23 +417,24 @@ static int ub913_log_status(struct v4l2_subdev *sd) u8 v, v1, v2; ub913_read(priv, UB913_REG_MODE_SEL, &v); - dev_info(dev, "MODE_SEL %#x\n", v); + dev_info(dev, "MODE_SEL %#02x\n", v); ub913_read(priv, UB913_REG_CRC_ERRORS_LSB, &v1); ub913_read(priv, UB913_REG_CRC_ERRORS_MSB, &v2); dev_info(dev, "CRC errors %u\n", v1 | (v2 << 8)); - ub913_read(priv, UB913_REG_GENERAL_STATUS, &v); - dev_info(dev, "GENERAL_STATUS %#x\n", v); - - ub913_read(priv, UB913_REG_PLL_OVR, &v); - dev_info(dev, "PLL_OVR %#x\n", v); - /* clear CRC errors */ ub913_read(priv, UB913_REG_GENERAL_CFG, &v); - ub913_write(priv, UB913_REG_GENERAL_CFG, v | UB913_REG_GENERAL_CFG_CRC_ERR_RESET); + ub913_write(priv, UB913_REG_GENERAL_CFG, + v | UB913_REG_GENERAL_CFG_CRC_ERR_RESET); ub913_write(priv, UB913_REG_GENERAL_CFG, v); + ub913_read(priv, UB913_REG_GENERAL_STATUS, &v); + dev_info(dev, "GENERAL_STATUS %#02x\n", v); + + ub913_read(priv, UB913_REG_PLL_OVR, &v); + dev_info(dev, "PLL_OVR %#02x\n", v); + return 0; } @@ -482,7 +446,7 @@ static const struct v4l2_subdev_pad_ops ub913_pad_ops = { .enable_streams = ub913_enable_streams, .disable_streams = ub913_disable_streams, .set_routing = ub913_set_routing, - .get_frame_desc = ub913_get_frame_desc, + .get_frame_desc = ub913_get_frame_desc, .get_fmt = v4l2_subdev_get_fmt, .set_fmt = ub913_set_fmt, .init_cfg = ub913_init_cfg, @@ -503,7 +467,6 @@ static int ub913_notify_bound(struct v4l2_async_notifier *notifier, { struct ub913_data *priv = sd_to_ub913(notifier->sd); struct device *dev = &priv->client->dev; - unsigned int src_pad; int ret; ret = media_entity_get_fwnode_pad(&source_subdev->entity, @@ -516,15 +479,16 @@ static int ub913_notify_bound(struct v4l2_async_notifier *notifier, } priv->source_sd = source_subdev; - src_pad = ret; + priv->source_sd_pad = ret; - ret = media_create_pad_link(&source_subdev->entity, src_pad, + ret = media_create_pad_link(&source_subdev->entity, priv->source_sd_pad, &priv->sd.entity, UB913_PAD_SINK, MEDIA_LNK_FL_ENABLED | - MEDIA_LNK_FL_IMMUTABLE); + MEDIA_LNK_FL_IMMUTABLE); if (ret) { dev_err(dev, "Unable to link %s:%u -> %s:0\n", - source_subdev->name, src_pad, priv->sd.name); + source_subdev->name, priv->source_sd_pad, + priv->sd.name); return ret; } @@ -539,22 +503,22 @@ static int ub913_v4l2_notifier_register(struct ub913_data *priv) { struct device *dev = &priv->client->dev; struct v4l2_async_subdev *asd; - struct device_node *ep_node; + struct fwnode_handle *ep_fwnode; int ret; - ep_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); - if (!ep_node) { + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + UB913_PAD_SINK, 0, 0); + if (!ep_fwnode) { dev_err(dev, "No graph endpoint\n"); return -ENODEV; } v4l2_async_nf_init(&priv->notifier); - asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, - of_fwnode_handle(ep_node), + asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, ep_fwnode, struct v4l2_async_subdev); - of_node_put(ep_node); + fwnode_handle_put(ep_fwnode); if (IS_ERR(asd)) { dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd)); @@ -587,6 +551,8 @@ static int ub913_register_clkout(struct ub913_data *priv) int ret; name = kasprintf(GFP_KERNEL, "ds90ub913.%s.clk_out", dev_name(dev)); + if (!name) + return -ENOMEM; priv->clkout_clk_hw = devm_clk_hw_register_fixed_factor(dev, name, __clk_get_name(priv->clkin), 0, 1, 2); @@ -653,25 +619,21 @@ static int ub913_add_i2c_adapter(struct ub913_data *priv) static int ub913_parse_dt(struct ub913_data *priv) { - struct device_node *np = priv->client->dev.of_node; struct device *dev = &priv->client->dev; + struct fwnode_handle *ep_fwnode; int ret; - struct device_node *ep_np; - if (!np) { - dev_err(dev, "OF: no device tree node!\n"); + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + UB913_PAD_SINK, 0, 0); + if (!ep_fwnode) { + dev_err(dev, "No sink endpoint\n"); return -ENOENT; } - ep_np = of_graph_get_endpoint_by_regs(np, 0, 0); - if (!ep_np) { - dev_err(dev, "OF: no endpoint\n"); - return -ENOENT; - } - - ret = of_property_read_u32(ep_np, "pclk-sample", &priv->pclk_polarity); + ret = fwnode_property_read_u32(ep_fwnode, "pclk-sample", + &priv->pclk_polarity); - of_node_put(ep_np); + fwnode_handle_put(ep_fwnode); if (ret) { dev_err(dev, "OF: failed to parse pclk-sample: %d\n", ret); @@ -681,84 +643,45 @@ static int ub913_parse_dt(struct ub913_data *priv) return 0; } -static int ub913_probe(struct i2c_client *client) +static int ub913_hw_init(struct ub913_data *priv) { - struct device *dev = &client->dev; - struct ub913_data *priv; - int ret; - u8 v; + struct device *dev = &priv->client->dev; bool mode_override; u8 mode; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->client = client; - - priv->plat_data = dev_get_platdata(&client->dev); - if (!priv->plat_data) { - dev_err(dev, "Platform data missing\n"); - return -ENODEV; - } - - priv->regmap = devm_regmap_init_i2c(client, &ub913_regmap_config); - if (IS_ERR(priv->regmap)) { - dev_err(dev, "Failed to init regmap\n"); - return PTR_ERR(priv->regmap); - } - - /* ub913 can also work without ext clock, but that is not supported */ - priv->clkin = devm_clk_get(dev, "clkin"); - if (IS_ERR(priv->clkin)) { - ret = PTR_ERR(priv->clkin); - if (ret != -EPROBE_DEFER) - dev_err(dev, "Cannot get CLKIN (%d)", ret); - return ret; - } - - ret = ub913_parse_dt(priv); - if (ret) - return ret; + int ret; + u8 v; ret = ub913_read(priv, UB913_REG_MODE_SEL, &v); if (ret) return ret; - if (!(v & UB913_REG_MODE_SEL_MODE_UP_TO_DATE)) { - dev_err(dev, "Mode value not stabilized\n"); - return -ENODEV; - } + if (!(v & UB913_REG_MODE_SEL_MODE_UP_TO_DATE)) + return dev_err_probe(dev, -ENODEV, + "Mode value not stabilized\n"); mode_override = v & UB913_REG_MODE_SEL_MODE_OVERRIDE; - mode = v & 0xf; + mode = v & UB913_REG_MODE_SEL_MODE_MASK; dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "deserializer", mode); ret = ub913_i2c_master_init(priv); - if (ret) { - dev_err(dev, "i2c master init failed: %d\n", ret); - return ret; - } - - ret = ub913_gpiochip_probe(priv); - if (ret) { - dev_err(dev, "Failed to init gpiochip\n"); - return ret; - } - - ret = ub913_register_clkout(priv); - if (ret) { - dev_err(dev, "Failed to register clkout\n"); - goto err_gpiochip_remove; - } + if (ret) + return dev_err_probe(dev, ret, "i2c master init failed\n"); ub913_read(priv, UB913_REG_GENERAL_CFG, &v); v &= ~UB913_REG_GENERAL_CFG_PCLK_RISING; v |= priv->pclk_polarity ? UB913_REG_GENERAL_CFG_PCLK_RISING : 0; ub913_write(priv, UB913_REG_GENERAL_CFG, v); + return 0; +} + +static int ub913_subdev_init(struct ub913_data *priv) +{ + struct device *dev = &priv->client->dev; + int ret; + v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub913_subdev_ops); priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS; priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; @@ -768,14 +691,18 @@ static int ub913_probe(struct i2c_client *client) priv->pads[1].flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads); - if (ret) { - dev_err(dev, "Failed to init pads\n"); - goto err_gpiochip_remove; - } + if (ret) + return dev_err_probe(dev, ret, "Failed to init pads\n"); - priv->tx_ep_np = of_graph_get_endpoint_by_regs(dev->of_node, 1, 0); - if (priv->tx_ep_np) - priv->sd.fwnode = of_fwnode_handle(priv->tx_ep_np); + priv->sd.fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + UB913_PAD_SOURCE, 0, + 0); + + if (!priv->sd.fwnode) { + ret = -ENODEV; + dev_err_probe(dev, ret, "Missing TX endpoint\n"); + goto err_entity_cleanup; + } ret = v4l2_subdev_init_finalize(&priv->sd); if (ret) @@ -783,35 +710,99 @@ static int ub913_probe(struct i2c_client *client) ret = ub913_v4l2_notifier_register(priv); if (ret) { - dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret); - goto err_free_state; + dev_err_probe(dev, ret, + "v4l2 subdev notifier register failed\n"); + goto err_subdev_cleanup; } ret = v4l2_async_register_subdev(&priv->sd); if (ret) { - dev_err(dev, "v4l2_async_register_subdev error: %d\n", ret); + dev_err_probe(dev, ret, "v4l2_async_register_subdev error\n"); goto err_unreg_notif; } - ret = ub913_add_i2c_adapter(priv); - if (ret) { - dev_err(dev, "failed to add remote i2c adapter\n"); - goto err_unreg_async_subdev; - } - return 0; -err_unreg_async_subdev: - v4l2_async_unregister_subdev(&priv->sd); err_unreg_notif: ub913_v4l2_nf_unregister(priv); -err_free_state: +err_subdev_cleanup: v4l2_subdev_cleanup(&priv->sd); err_entity_cleanup: - if (priv->tx_ep_np) - of_node_put(priv->tx_ep_np); + media_entity_cleanup(&priv->sd.entity); + + return ret; +} +static void ub913_subdev_uninit(struct ub913_data *priv) +{ + v4l2_async_unregister_subdev(&priv->sd); + ub913_v4l2_nf_unregister(priv); + v4l2_subdev_cleanup(&priv->sd); media_entity_cleanup(&priv->sd.entity); +} + +static int ub913_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ub913_data *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + + priv->plat_data = dev_get_platdata(&client->dev); + if (!priv->plat_data) + return dev_err_probe(dev, -ENODEV, "Platform data missing\n"); + + priv->regmap = devm_regmap_init_i2c(client, &ub913_regmap_config); + if (IS_ERR(priv->regmap)) + return dev_err_probe(dev, PTR_ERR(priv->regmap), + "Failed to init regmap\n"); + + /* + * ub913 can also work without ext clock, but that is not supported by + * the driver yet + */ + priv->clkin = devm_clk_get(dev, "clkin"); + if (IS_ERR(priv->clkin)) + return dev_err_probe(dev, PTR_ERR(priv->clkin), + "Cannot get CLKIN\n"); + + ret = ub913_parse_dt(priv); + if (ret) + return ret; + + ret = ub913_hw_init(priv); + if (ret) + return ret; + + ret = ub913_gpiochip_probe(priv); + if (ret) + return dev_err_probe(dev, ret, "Failed to init gpiochip\n"); + + ret = ub913_register_clkout(priv); + if (ret) { + dev_err_probe(dev, ret, "Failed to register clkout\n"); + goto err_gpiochip_remove; + } + + ret = ub913_subdev_init(priv); + if (ret) + goto err_gpiochip_remove; + + ret = ub913_add_i2c_adapter(priv); + if (ret) { + dev_err_probe(dev, ret, "failed to add remote i2c adapter\n"); + goto err_subdev_uninit; + } + + return 0; + +err_subdev_uninit: + ub913_subdev_uninit(priv); err_gpiochip_remove: ub913_gpiochip_remove(priv); @@ -823,19 +814,9 @@ static void ub913_remove(struct i2c_client *client) struct v4l2_subdev *sd = i2c_get_clientdata(client); struct ub913_data *priv = sd_to_ub913(sd); - i2c_atr_del_adapter(priv->plat_data->atr, - priv->plat_data->port); - - v4l2_async_unregister_subdev(&priv->sd); - - ub913_v4l2_nf_unregister(priv); - - v4l2_subdev_cleanup(&priv->sd); + i2c_atr_del_adapter(priv->plat_data->atr, priv->plat_data->port); - if (priv->tx_ep_np) - of_node_put(priv->tx_ep_np); - - media_entity_cleanup(&priv->sd.entity); + ub913_subdev_uninit(priv); ub913_gpiochip_remove(priv); } @@ -843,13 +824,11 @@ static void ub913_remove(struct i2c_client *client) static const struct i2c_device_id ub913_id[] = { { "ds90ub913a-q1", 0 }, {} }; MODULE_DEVICE_TABLE(i2c, ub913_id); -#ifdef CONFIG_OF static const struct of_device_id ub913_dt_ids[] = { - { .compatible = "ti,ds90ub913a-q1", }, + { .compatible = "ti,ds90ub913a-q1" }, {} }; MODULE_DEVICE_TABLE(of, ub913_dt_ids); -#endif static struct i2c_driver ds90ub913_driver = { .probe_new = ub913_probe, @@ -857,15 +836,13 @@ static struct i2c_driver ds90ub913_driver = { .id_table = ub913_id, .driver = { .name = "ds90ub913a", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(ub913_dt_ids), + .of_match_table = ub913_dt_ids, }, }; - module_i2c_driver(ds90ub913_driver); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Texas Instruments DS90UB913 serializer driver"); +MODULE_DESCRIPTION("Texas Instruments DS90UB913 FPD-Link III Serializer Driver"); MODULE_AUTHOR("Luca Ceresoli "); MODULE_AUTHOR("Tomi Valkeinen "); MODULE_IMPORT_NS(I2C_ATR); diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c index 251dc8e8adfa..ec33e16da3d1 100644 --- a/drivers/media/i2c/ds90ub953.c +++ b/drivers/media/i2c/ds90ub953.c @@ -5,21 +5,21 @@ * Based on a driver from Luca Ceresoli * * Copyright (c) 2019 Luca Ceresoli - * Copyright (c) 2022 Tomi Valkeinen + * Copyright (c) 2023 Tomi Valkeinen */ #include #include #include +#include #include #include #include #include #include #include -#include #include -#include +#include #include #include @@ -126,7 +126,7 @@ enum ub953_mode { struct ub953_hw_data { const char *model; - bool ub971; + bool is_ub971; }; struct ub953_data { @@ -138,7 +138,6 @@ struct ub953_data { u32 num_data_lanes; struct gpio_chip gpio_chip; - char gpio_chip_name[64]; struct v4l2_subdev sd; struct media_pad pads[2]; @@ -146,13 +145,12 @@ struct ub953_data { struct v4l2_async_notifier notifier; struct v4l2_subdev *source_sd; + u16 source_sd_pad; struct v4l2_ctrl_handler ctrl_handler; u64 enabled_source_streams; - struct device_node *tx_ep_np; - /* lock for register access */ struct mutex reg_lock; @@ -183,8 +181,8 @@ static int ub953_read(struct ub953_data *priv, u8 reg, u8 *val) ret = regmap_read(priv->regmap, reg, &v); if (ret) - dev_err(&priv->client->dev, - "Cannot read register 0x%02x: %d!\n", reg, ret); + dev_err(&priv->client->dev, "Cannot read register 0x%02x: %d\n", + reg, ret); else *val = v; @@ -202,7 +200,7 @@ static int ub953_write(struct ub953_data *priv, u8 reg, u8 val) ret = regmap_write(priv->regmap, reg, val); if (ret) dev_err(&priv->client->dev, - "Cannot write register 0x%02x: %d!\n", reg, ret); + "Cannot write register 0x%02x: %d\n", reg, ret); mutex_unlock(&priv->reg_lock); @@ -219,7 +217,7 @@ static int _ub953_select_ind_reg_block(struct ub953_data *priv, u8 block) ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_CTL, block << 2); if (ret) { - dev_err(dev, "%s: cannot select indirect target %u (%d)!\n", + dev_err(dev, "%s: cannot select indirect target %u (%d)\n", __func__, block, ret); return ret; } @@ -229,8 +227,8 @@ static int _ub953_select_ind_reg_block(struct ub953_data *priv, u8 block) return 0; } -__maybe_unused -static int ub953_read_ind(struct ub953_data *priv, u8 block, u8 reg, u8 *val) +__maybe_unused static int ub953_read_ind(struct ub953_data *priv, u8 block, + u8 reg, u8 *val) { unsigned int v; int ret; @@ -242,12 +240,20 @@ static int ub953_read_ind(struct ub953_data *priv, u8 block, u8 reg, u8 *val) goto out; ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); - if (ret) + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_ADDR failed when reading %u:%x02x: %d\n", + block, reg, ret); goto out; + } ret = regmap_read(priv->regmap, UB953_REG_IND_ACC_DATA, &v); - if (ret) + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_DATA failed when reading %u:%x02x: %d\n", + block, reg, ret); goto out; + } *val = v; @@ -268,10 +274,19 @@ static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) goto out; ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); - if (ret) + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_ADDR failed when writing %u:%x02x: %d\n", + block, reg, ret); goto out; + } ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val); + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_DATA failed when writing %u:%x02x\n: %d\n", + block, reg, ret); + } out: mutex_unlock(&priv->reg_lock); @@ -334,11 +349,10 @@ static int ub953_gpio_direction_in(struct gpio_chip *gc, unsigned int offset) { struct ub953_data *priv = gpiochip_get_data(gc); - return regmap_update_bits( - priv->regmap, UB953_REG_GPIO_INPUT_CTRL, - UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | - UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), - UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)); + return regmap_update_bits(priv->regmap, UB953_REG_GPIO_INPUT_CTRL, + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)); } static int ub953_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, @@ -347,19 +361,18 @@ static int ub953_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, struct ub953_data *priv = gpiochip_get_data(gc); int ret; - ret = regmap_update_bits( - priv->regmap, UB953_REG_LOCAL_GPIO_DATA, - UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), - value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0); + ret = regmap_update_bits(priv->regmap, UB953_REG_LOCAL_GPIO_DATA, + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : + 0); if (ret) return ret; - return regmap_update_bits( - priv->regmap, UB953_REG_GPIO_INPUT_CTRL, - UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | - UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), - UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset)); + return regmap_update_bits(priv->regmap, UB953_REG_GPIO_INPUT_CTRL, + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset)); } static int ub953_gpio_get(struct gpio_chip *gc, unsigned int offset) @@ -379,10 +392,10 @@ static void ub953_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) { struct ub953_data *priv = gpiochip_get_data(gc); - regmap_update_bits( - priv->regmap, UB953_REG_LOCAL_GPIO_DATA, - UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), - value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0); + regmap_update_bits(priv->regmap, UB953_REG_LOCAL_GPIO_DATA, + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : + 0); } static int ub953_gpio_of_xlate(struct gpio_chip *gc, @@ -405,14 +418,11 @@ static int ub953_gpiochip_probe(struct ub953_data *priv) ub953_write(priv, UB953_REG_LOCAL_GPIO_DATA, 0); ub953_write(priv, UB953_REG_GPIO_INPUT_CTRL, 0xf); - scnprintf(priv->gpio_chip_name, sizeof(priv->gpio_chip_name), "%s", - dev_name(dev)); - - gc->label = priv->gpio_chip_name; + gc->label = dev_name(dev); gc->parent = dev; gc->owner = THIS_MODULE; gc->base = -1; - gc->can_sleep = 1; + gc->can_sleep = true; gc->ngpio = UB953_NUM_GPIOS; gc->get_direction = ub953_gpio_get_direction; gc->direction_input = ub953_gpio_direction_in; @@ -420,7 +430,6 @@ static int ub953_gpiochip_probe(struct ub953_data *priv) gc->get = ub953_gpio_get; gc->set = ub953_gpio_set; gc->of_xlate = ub953_gpio_of_xlate; - gc->of_node = priv->client->dev.of_node; gc->of_gpio_n_cells = 2; ret = gpiochip_add_data(gc, priv); @@ -490,24 +499,6 @@ static int ub953_set_routing(struct v4l2_subdev *sd, return _ub953_set_routing(sd, state, routing); } -static int ub953_get_source_frame_desc(struct ub953_data *priv, - struct v4l2_mbus_frame_desc *desc) -{ - struct media_pad *pad; - int ret; - - pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); - if (!pad) - return -EPIPE; - - ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, pad->index, - desc); - if (ret) - return ret; - - return 0; -} - static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, struct v4l2_mbus_frame_desc *fd) { @@ -521,18 +512,19 @@ static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, if (pad != UB953_PAD_SOURCE) return -EINVAL; - ret = ub953_get_source_frame_desc(priv, &source_fd); + ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, + priv->source_sd_pad, &source_fd); if (ret) return ret; - state = v4l2_subdev_lock_and_get_active_state(sd); - - routing = &state->routing; - memset(fd, 0, sizeof(*fd)); fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; + state = v4l2_subdev_lock_and_get_active_state(sd); + + routing = &state->routing; + for_each_active_route(routing, route) { struct v4l2_mbus_frame_desc_entry *source_entry = NULL; unsigned int i; @@ -540,11 +532,12 @@ static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, if (route->source_pad != pad) continue; - for (i = 0; i < source_fd.num_entries; ++i) + for (i = 0; i < source_fd.num_entries; ++i) { if (source_fd.entry[i].stream == route->sink_stream) { source_entry = &source_fd.entry[i]; break; } + } if (!source_entry) { dev_err(&priv->client->dev, @@ -644,7 +637,7 @@ static int ub953_log_status(struct v4l2_subdev *sd) dev_info(dev, "ID '%s'\n", id); ub953_read(priv, UB953_REG_GENERAL_STATUS, &v); - dev_info(dev, "GENERAL_STATUS %#x\n", v); + dev_info(dev, "GENERAL_STATUS %#02x\n", v); ub953_read(priv, UB953_REG_CRC_ERR_CNT1, &v1); ub953_read(priv, UB953_REG_CRC_ERR_CNT2, &v2); @@ -654,16 +647,16 @@ static int ub953_log_status(struct v4l2_subdev *sd) dev_info(dev, "CSI error count %u\n", v); ub953_read(priv, UB953_REG_CSI_ERR_STATUS, &v); - dev_info(dev, "CSI_ERR_STATUS %#x\n", v); + dev_info(dev, "CSI_ERR_STATUS %#02x\n", v); ub953_read(priv, UB953_REG_CSI_ERR_DLANE01, &v); - dev_info(dev, "CSI_ERR_DLANE01 %#x\n", v); + dev_info(dev, "CSI_ERR_DLANE01 %#02x\n", v); ub953_read(priv, UB953_REG_CSI_ERR_DLANE23, &v); - dev_info(dev, "CSI_ERR_DLANE23 %#x\n", v); + dev_info(dev, "CSI_ERR_DLANE23 %#02x\n", v); ub953_read(priv, UB953_REG_CSI_ERR_CLK_LANE, &v); - dev_info(dev, "CSI_ERR_CLK_LANE %#x\n", v); + dev_info(dev, "CSI_ERR_CLK_LANE %#02x\n", v); ub953_read(priv, UB953_REG_CSI_PKT_HDR_VC_ID, &v); dev_info(dev, "CSI packet header VC %u ID %u\n", v >> 6, v & 0x3f); @@ -673,7 +666,7 @@ static int ub953_log_status(struct v4l2_subdev *sd) dev_info(dev, "CSI packet header WC %u\n", (v2 << 8) | v1); ub953_read(priv, UB953_REG_CSI_ECC, &v); - dev_info(dev, "CSI ECC %#x\n", v); + dev_info(dev, "CSI ECC %#02x\n", v); ub953_read(priv, UB953_REG_LOCAL_GPIO_DATA, &gpio_local_data); ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &gpio_input_ctrl); @@ -698,19 +691,14 @@ static int ub953_enable_streams(struct v4l2_subdev *sd, u64 streams_mask) { struct ub953_data *priv = sd_to_ub953(sd); - struct media_pad *remote_pad; u64 sink_streams; int ret; - if (streams_mask & priv->enabled_source_streams) - return -EALREADY; - - sink_streams = v4l2_subdev_state_xlate_streams( - state, UB953_PAD_SOURCE, UB953_PAD_SINK, &streams_mask); + sink_streams = v4l2_subdev_state_xlate_streams(state, UB953_PAD_SOURCE, + UB953_PAD_SINK, + &streams_mask); - remote_pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); - - ret = v4l2_subdev_enable_streams(priv->source_sd, remote_pad->index, + ret = v4l2_subdev_enable_streams(priv->source_sd, priv->source_sd_pad, sink_streams); if (ret) return ret; @@ -725,19 +713,14 @@ static int ub953_disable_streams(struct v4l2_subdev *sd, u64 streams_mask) { struct ub953_data *priv = sd_to_ub953(sd); - struct media_pad *remote_pad; - int ret; u64 sink_streams; + int ret; - if ((streams_mask & priv->enabled_source_streams) != streams_mask) - return -EALREADY; - - sink_streams = v4l2_subdev_state_xlate_streams( - state, UB953_PAD_SOURCE, UB953_PAD_SINK, &streams_mask); - - remote_pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); + sink_streams = v4l2_subdev_state_xlate_streams(state, UB953_PAD_SOURCE, + UB953_PAD_SINK, + &streams_mask); - ret = v4l2_subdev_disable_streams(priv->source_sd, remote_pad->index, + ret = v4l2_subdev_disable_streams(priv->source_sd, priv->source_sd_pad, sink_streams); if (ret) return ret; @@ -758,9 +741,9 @@ static const struct v4l2_subdev_pad_ops ub953_pad_ops = { }; static const struct v4l2_subdev_core_ops ub953_subdev_core_ops = { - .log_status = ub953_log_status, - .subscribe_event = v4l2_ctrl_subdev_subscribe_event, - .unsubscribe_event = v4l2_event_subdev_unsubscribe, + .log_status = ub953_log_status, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, }; static const struct v4l2_subdev_ops ub953_subdev_ops = { @@ -896,7 +879,6 @@ static int ub953_notify_bound(struct v4l2_async_notifier *notifier, { struct ub953_data *priv = sd_to_ub953(notifier->sd); struct device *dev = &priv->client->dev; - unsigned int src_pad; int ret; ret = media_entity_get_fwnode_pad(&source_subdev->entity, @@ -909,14 +891,16 @@ static int ub953_notify_bound(struct v4l2_async_notifier *notifier, } priv->source_sd = source_subdev; - src_pad = ret; + priv->source_sd_pad = ret; - ret = media_create_pad_link( - &source_subdev->entity, src_pad, &priv->sd.entity, 0, - MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); + ret = media_create_pad_link(&source_subdev->entity, priv->source_sd_pad, + &priv->sd.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); if (ret) { dev_err(dev, "Unable to link %s:%u -> %s:0\n", - source_subdev->name, src_pad, priv->sd.name); + source_subdev->name, priv->source_sd_pad, + priv->sd.name); return ret; } @@ -931,22 +915,22 @@ static int ub953_v4l2_notifier_register(struct ub953_data *priv) { struct device *dev = &priv->client->dev; struct v4l2_async_subdev *asd; - struct device_node *ep_node; + struct fwnode_handle *ep_fwnode; int ret; - ep_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); - if (!ep_node) { + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + UB953_PAD_SINK, 0, 0); + if (!ep_fwnode) { dev_err(dev, "No graph endpoint\n"); return -ENODEV; } v4l2_async_nf_init(&priv->notifier); - asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, - of_fwnode_handle(ep_node), + asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, ep_fwnode, struct v4l2_async_subdev); - of_node_put(ep_node); + fwnode_handle_put(ep_fwnode); if (IS_ERR(asd)) { dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd)); @@ -1000,23 +984,15 @@ static int ub953_i2c_master_init(struct ub953_data *priv) static u64 ub953_get_fc_rate(struct ub953_data *priv) { - if (priv->hw_data->ub971) { - switch (priv->mode) { - case UB953_MODE_SYNC: - return priv->plat_data->bc_rate * 160ull; - default: - /* Not supported */ - return 0; - } - } else { - switch (priv->mode) { - case UB953_MODE_SYNC: - return priv->plat_data->bc_rate / 2 * 160ull; - default: - /* Not supported */ - return 0; - } + if (priv->mode != UB953_MODE_SYNC) { + /* Not supported */ + return 0; } + + if (priv->hw_data->is_ub971) + return priv->plat_data->bc_rate * 160ull; + else + return priv->plat_data->bc_rate / 2 * 160ull; } static unsigned long ub953_calc_clkout_ub953(struct ub953_data *priv, @@ -1105,7 +1081,7 @@ static unsigned long ub953_clkout_recalc_rate(struct clk_hw *hw, fc_rate = ub953_get_fc_rate(priv); - if (priv->hw_data->ub971) { + if (priv->hw_data->is_ub971) { mul = ctrl0 & 0x1f; div = ctrl1; @@ -1145,17 +1121,15 @@ static long ub953_clkout_round_rate(struct clk_hw *hw, unsigned long rate, fc_rate = ub953_get_fc_rate(priv); - if (priv->hw_data->ub971) { + if (priv->hw_data->is_ub971) { res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n); - dev_dbg(dev, - "%s %llu * %u / (8 * %u) = %lu (requested %lu)", + dev_dbg(dev, "%s %llu * %u / (8 * %u) = %lu (requested %lu)", __func__, fc_rate, m, n, res, rate); } else { res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n); - dev_dbg(dev, - "%s %llu / %u * %u / %u = %lu (requested %lu)", + dev_dbg(dev, "%s %llu / %u * %u / %u = %lu (requested %lu)", __func__, fc_rate, hs_div, m, n, res, rate); } @@ -1172,7 +1146,7 @@ static int ub953_clkout_set_rate(struct clk_hw *hw, unsigned long rate, fc_rate = ub953_get_fc_rate(priv); - if (priv->hw_data->ub971) { + if (priv->hw_data->is_ub971) { res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n); ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m); @@ -1184,8 +1158,8 @@ static int ub953_clkout_set_rate(struct clk_hw *hw, unsigned long rate, ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); } - dev_dbg(&priv->client->dev, - "%s %lu (requested %lu)\n", __func__, res, rate); + dev_dbg(&priv->client->dev, "%s %lu (requested %lu)\n", __func__, res, + rate); return 0; } @@ -1232,8 +1206,11 @@ static int ub953_register_clkout(struct ub953_data *priv) }; int ret; + if (!init.name) + return -ENOMEM; + /* Initialize clkout to 25MHz by default */ - if (priv->hw_data->ub971) + if (priv->hw_data->is_ub971) ub953_init_clkout_ub971(priv); else ub953_init_clkout_ub953(priv); @@ -1285,33 +1262,29 @@ static const struct regmap_config ub953_regmap_config = { static int ub953_parse_dt(struct ub953_data *priv) { - struct device_node *np = priv->client->dev.of_node; struct device *dev = &priv->client->dev; - struct device_node *ep_np; + struct fwnode_handle *ep_fwnode; int ret; - if (!np) { - dev_err(dev, "OF: no device tree node!\n"); - return -ENOENT; - } - - ep_np = of_graph_get_endpoint_by_regs(np, 0, 0); - if (!ep_np) { + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + UB953_PAD_SINK, 0, 0); + if (!ep_fwnode) { dev_err(dev, "OF: no endpoint\n"); return -ENOENT; } - ret = of_property_count_u32_elems(ep_np, "data-lanes"); + ret = fwnode_property_count_u32(ep_fwnode, "data-lanes"); - of_node_put(ep_np); + fwnode_handle_put(ep_fwnode); if (ret <= 0) { - dev_err(dev, "OF: failed to parse data-lanes: %d\n", ret); + dev_err(dev, "failed to parse property 'data-lanes': %d\n", + ret); return ret; } if (ret != 1 && ret != 2 && ret != 4) { - dev_err(dev, "OF: bad number of data-lanes: %d\n", ret); + dev_err(dev, "bad number of data-lanes: %d\n", ret); return -EINVAL; } @@ -1320,58 +1293,19 @@ static int ub953_parse_dt(struct ub953_data *priv) return 0; } -static int ub953_probe(struct i2c_client *client) +static int ub953_hw_init(struct ub953_data *priv) { - struct device *dev = &client->dev; - struct ub953_data *priv; + struct device *dev = &priv->client->dev; + bool mode_override; int ret; u8 v; - bool mode_override; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->client = client; - - priv->hw_data = of_device_get_match_data(dev); - if (!priv->hw_data) - return -ENODEV; - - priv->plat_data = dev_get_platdata(&client->dev); - if (!priv->plat_data) { - dev_err(dev, "Platform data missing\n"); - return -ENODEV; - } - - mutex_init(&priv->reg_lock); - - /* - * Initialize to invalid values so that the first reg writes will - * configure the target. - */ - priv->current_indirect_target = 0xff; - - priv->regmap = devm_regmap_init_i2c(client, &ub953_regmap_config); - if (IS_ERR(priv->regmap)) { - dev_err(dev, "Failed to init regmap\n"); - ret = PTR_ERR(priv->regmap); - goto err_mutex_destroy; - } - - ret = ub953_parse_dt(priv); - if (ret) - goto err_mutex_destroy; ret = ub953_read(priv, UB953_REG_MODE_SEL, &v); if (ret) - goto err_mutex_destroy; + return ret; - if (!(v & UB953_REG_MODE_SEL_MODE_DONE)) { - dev_err(dev, "Mode value not stabilized\n"); - ret = -ENODEV; - goto err_mutex_destroy; - } + if (!(v & UB953_REG_MODE_SEL_MODE_DONE)) + return dev_err_probe(dev, -EIO, "Mode value not stabilized\n"); mode_override = v & UB953_REG_MODE_SEL_MODE_OVERRIDE; @@ -1389,57 +1323,46 @@ static int ub953_probe(struct i2c_client *client) priv->mode = UB953_MODE_DVP; break; default: - dev_err(dev, "Illegal mode in mode register\n"); - ret = -ENODEV; - goto err_mutex_destroy; + return dev_err_probe(dev, -EIO, + "Illegal mode in mode register\n"); } dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "strap", priv->mode); - if (priv->mode != UB953_MODE_SYNC) { - dev_err(dev, "Only synchronous mode supported\n"); - ret = -ENODEV; - goto err_mutex_destroy; - } + if (priv->mode != UB953_MODE_SYNC) + return dev_err_probe(dev, -ENODEV, + "Only synchronous mode supported\n"); ret = ub953_read(priv, UB953_REG_REV_MASK_ID, &v); - if (ret) { - dev_err(dev, "Failed to read revision: %d", ret); - goto err_mutex_destroy; - } + if (ret) + return dev_err_probe(dev, ret, "Failed to read revision"); dev_info(dev, "Found %s rev/mask %#04x\n", priv->hw_data->model, v); ret = ub953_read(priv, UB953_REG_GENERAL_CFG, &v); if (ret) - goto err_mutex_destroy; + return ret; dev_dbg(dev, "i2c strap setting %s V\n", (v & UB953_REG_GENERAL_CFG_I2C_STRAP_MODE) ? "1.8" : "3.3"); ret = ub953_i2c_master_init(priv); - if (ret) { - dev_err(dev, "i2c init failed: %d\n", ret); - goto err_mutex_destroy; - } - - ret = ub953_gpiochip_probe(priv); - if (ret) { - dev_err(dev, "Failed to init gpiochip\n"); - goto err_mutex_destroy; - } + if (ret) + return dev_err_probe(dev, ret, "i2c init failed\n"); ub953_write(priv, UB953_REG_GENERAL_CFG, UB953_REG_GENERAL_CFG_CONT_CLK | ((priv->num_data_lanes - 1) << UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT) | UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE); - ret = ub953_register_clkout(priv); - if (ret) { - dev_err(dev, "Failed to register clkout\n"); - goto err_gpiochip_remove; - } + return 0; +} + +static int ub953_subdev_init(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + int ret; v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub953_subdev_ops); @@ -1452,13 +1375,12 @@ static int ub953_probe(struct i2c_client *client) ARRAY_SIZE(ub953_tpg_qmenu) - 1, 0, 0, ub953_tpg_qmenu); - if (priv->ctrl_handler.error) { - ret = priv->ctrl_handler.error; - goto err_gpiochip_remove; - } + if (priv->ctrl_handler.error) + return dev_err_probe(dev, priv->ctrl_handler.error, + "Failed to set up v4l2 controls\n"); - priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS | - V4L2_SUBDEV_FL_STREAMS; + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_STREAMS; priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; priv->sd.entity.ops = &ub953_entity_ops; @@ -1467,12 +1389,18 @@ static int ub953_probe(struct i2c_client *client) ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads); if (ret) { - dev_err(dev, "Failed to init pads\n"); + dev_err_probe(dev, ret, "Failed to init pads\n"); goto err_remove_ctrls; } - priv->tx_ep_np = of_graph_get_endpoint_by_regs(dev->of_node, 1, 0); - priv->sd.fwnode = of_fwnode_handle(priv->tx_ep_np); + priv->sd.fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + UB953_PAD_SOURCE, 0, + 0); + if (!priv->sd.fwnode) { + ret = -ENODEV; + dev_err_probe(dev, ret, "Missing TX endpoint\n"); + goto err_entity_cleanup; + } priv->sd.state_lock = priv->sd.ctrl_handler->lock; @@ -1482,37 +1410,109 @@ static int ub953_probe(struct i2c_client *client) ret = ub953_v4l2_notifier_register(priv); if (ret) { - dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret); + dev_err_probe(dev, ret, + "v4l2 subdev notifier register failed\n"); goto err_free_state; } ret = v4l2_async_register_subdev(&priv->sd); if (ret) { - dev_err(dev, "v4l2_async_register_subdev error: %d\n", ret); + dev_err_probe(dev, ret, "v4l2_async_register_subdev error\n"); goto err_unreg_notif; } - ret = ub953_add_i2c_adapter(priv); - if (ret) { - dev_err(dev, "failed to add remote i2c adapter\n"); - goto err_unreg_async_subdev; - } - return 0; -err_unreg_async_subdev: - v4l2_async_unregister_subdev(&priv->sd); err_unreg_notif: ub953_v4l2_notifier_unregister(priv); err_free_state: v4l2_subdev_cleanup(&priv->sd); err_entity_cleanup: - if (priv->tx_ep_np) - of_node_put(priv->tx_ep_np); - media_entity_cleanup(&priv->sd.entity); err_remove_ctrls: v4l2_ctrl_handler_free(&priv->ctrl_handler); + + return ret; +} + +static void ub953_subdev_uninit(struct ub953_data *priv) +{ + v4l2_async_unregister_subdev(&priv->sd); + ub953_v4l2_notifier_unregister(priv); + v4l2_subdev_cleanup(&priv->sd); + media_entity_cleanup(&priv->sd.entity); + v4l2_ctrl_handler_free(&priv->ctrl_handler); +} + +static int ub953_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ub953_data *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + + priv->hw_data = of_device_get_match_data(dev); + if (!priv->hw_data) + return -ENODEV; + + priv->plat_data = dev_get_platdata(&client->dev); + if (!priv->plat_data) + return dev_err_probe(dev, -ENODEV, "Platform data missing\n"); + + mutex_init(&priv->reg_lock); + + /* + * Initialize to invalid values so that the first reg writes will + * configure the target. + */ + priv->current_indirect_target = 0xff; + + priv->regmap = devm_regmap_init_i2c(client, &ub953_regmap_config); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + dev_err_probe(dev, ret, "Failed to init regmap\n"); + goto err_mutex_destroy; + } + + ret = ub953_parse_dt(priv); + if (ret) + goto err_mutex_destroy; + + ret = ub953_hw_init(priv); + if (ret) + goto err_mutex_destroy; + + ret = ub953_gpiochip_probe(priv); + if (ret) { + dev_err_probe(dev, ret, "Failed to init gpiochip\n"); + goto err_mutex_destroy; + } + + ret = ub953_register_clkout(priv); + if (ret) { + dev_err_probe(dev, ret, "Failed to register clkout\n"); + goto err_gpiochip_remove; + } + + ret = ub953_subdev_init(priv); + if (ret) + goto err_gpiochip_remove; + + ret = ub953_add_i2c_adapter(priv); + if (ret) { + dev_err_probe(dev, ret, "failed to add remote i2c adapter\n"); + goto err_subdev_uninit; + } + + return 0; + +err_subdev_uninit: + ub953_subdev_uninit(priv); err_gpiochip_remove: ub953_gpiochip_remove(priv); err_mutex_destroy: @@ -1526,20 +1526,9 @@ static void ub953_remove(struct i2c_client *client) struct v4l2_subdev *sd = i2c_get_clientdata(client); struct ub953_data *priv = sd_to_ub953(sd); - i2c_atr_del_adapter(priv->plat_data->atr, - priv->plat_data->port); - - v4l2_async_unregister_subdev(&priv->sd); - - ub953_v4l2_notifier_unregister(priv); - - v4l2_subdev_cleanup(&priv->sd); - - of_node_put(priv->tx_ep_np); + i2c_atr_del_adapter(priv->plat_data->atr, priv->plat_data->port); - media_entity_cleanup(&priv->sd.entity); - - v4l2_ctrl_handler_free(&priv->ctrl_handler); + ub953_subdev_uninit(priv); ub953_gpiochip_remove(priv); mutex_destroy(&priv->reg_lock); @@ -1551,7 +1540,7 @@ static const struct ub953_hw_data ds90ub953_hw = { static const struct ub953_hw_data ds90ub971_hw = { .model = "ub971", - .ub971 = true, + .is_ub971 = true, }; static const struct i2c_device_id ub953_id[] = { @@ -1561,14 +1550,12 @@ static const struct i2c_device_id ub953_id[] = { }; MODULE_DEVICE_TABLE(i2c, ub953_id); -#ifdef CONFIG_OF static const struct of_device_id ub953_dt_ids[] = { { .compatible = "ti,ds90ub953-q1", .data = &ds90ub953_hw }, { .compatible = "ti,ds90ub971-q1", .data = &ds90ub971_hw }, {} }; MODULE_DEVICE_TABLE(of, ub953_dt_ids); -#endif static struct i2c_driver ds90ub953_driver = { .probe_new = ub953_probe, @@ -1577,14 +1564,13 @@ static struct i2c_driver ds90ub953_driver = { .driver = { .name = "ds90ub953", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(ub953_dt_ids), + .of_match_table = ub953_dt_ids, }, }; - module_i2c_driver(ds90ub953_driver); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Texas Instruments DS90UB953 serializer driver"); +MODULE_DESCRIPTION("Texas Instruments FPD-Link III/IV CSI-2 Serializers Driver"); MODULE_AUTHOR("Luca Ceresoli "); MODULE_AUTHOR("Tomi Valkeinen "); MODULE_IMPORT_NS(I2C_ATR); diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c index b532a93f3da7..2cefb3744901 100644 --- a/drivers/media/i2c/ds90ub960.c +++ b/drivers/media/i2c/ds90ub960.c @@ -3,12 +3,13 @@ * Driver for the Texas Instruments DS90UB960-Q1 video deserializer * * Copyright (c) 2019 Luca Ceresoli - * Copyright (c) 2022 Tomi Valkeinen + * Copyright (c) 2023 Tomi Valkeinen */ #include #include #include +#include #include #include #include @@ -18,9 +19,8 @@ #include #include #include -#include #include -#include +#include #include #include #include @@ -348,8 +348,8 @@ struct ub960_hw_data { const char *model; u8 num_rxports; u8 num_txports; - bool ub9702; - bool fpdlink4; + bool is_ub9702; + bool is_fpdlink4; }; enum ub960_rxport_mode { @@ -371,13 +371,14 @@ struct ub960_rxport { struct ub960_data *priv; u8 nport; /* RX port number, and index in priv->rxport[] */ - struct v4l2_subdev *sd; /* Connected subdev */ - struct fwnode_handle *fwnode; + struct v4l2_subdev *source_sd; /* Connected subdev */ + u16 source_sd_pad; + struct fwnode_handle *source_ep_fwnode; enum ub960_rxport_mode rx_mode; enum ub960_rxport_cdr cdr_mode; - struct device_node *remote_of_node; /* 'serializer' OF node */ + struct fwnode_handle *remote_fwnode; /* 'serializer' fwnode */ struct i2c_client *ser_client; /* Serializer */ unsigned short ser_alias; /* Serializer i2c alias (lower 7 bits) */ @@ -507,7 +508,7 @@ enum { TEST_PATTERN_V_COLOR_BARS_8, }; -static const char * const ub960_tpg_qmenu[] = { +static const char *const ub960_tpg_qmenu[] = { "Disabled", "1 vertical color bar", "2 vertical color bars", @@ -832,12 +833,20 @@ static int ub960_read_ind(struct ub960_data *priv, u8 block, u8 reg, u8 *val) goto out; ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg); - if (ret) + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_ADDR failed when reading %u:%x02x: %d\n", + block, reg, ret); goto out; + } ret = regmap_read(priv->regmap, UB960_SR_IND_ACC_DATA, &v); - if (ret) + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_DATA failed when reading %u:%x02x: %d\n", + block, reg, ret); goto out; + } *val = v; @@ -854,12 +863,20 @@ static int ub960_write_ind(struct ub960_data *priv, u8 block, u8 reg, u8 val) mutex_lock(&priv->reg_lock); ret = _ub960_select_ind_reg_block(priv, block); - if (ret) + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_ADDR failed when writing %u:%x02x: %d\n", + block, reg, ret); goto out; + } ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg); - if (ret) + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_DATA failed when writing %u:%x02x\n: %d\n", + block, reg, ret); goto out; + } ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_DATA, val); @@ -937,7 +954,6 @@ static int ub960_ind_update_bits(struct ub960_data *priv, u8 block, u8 reg, */ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, - const struct i2c_board_info *info, const struct i2c_client *client, u16 *alias_id) { @@ -951,7 +967,7 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, int ret = 0; u8 port_reg_idx_mask = 0; - dev_dbg(dev, "rx%d: %s\n", chan_id, __func__); + dev_dbg(dev, "rx%u: %s\n", chan_id, __func__); mutex_lock(&priv->atr_alias_table.lock); @@ -974,13 +990,13 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, } if (!entry) { - dev_err(dev, "rx%d: alias pool exhausted\n", rxport->nport); + dev_err(dev, "rx%u: alias pool exhausted\n", rxport->nport); ret = -EADDRNOTAVAIL; goto out; } if (port_reg_idx_mask == (1 << UB960_MAX_PORT_ALIASES) - 1) { - dev_err(dev, "rx%d: all aliases in use\n", rxport->nport); + dev_err(dev, "rx%u: all aliases in use\n", rxport->nport); ret = -EADDRNOTAVAIL; goto out; } @@ -1003,7 +1019,7 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, *alias_id = alias; /* tell the atr which alias we chose */ - dev_dbg(dev, "rx%d: client 0x%02x mapped at alias 0x%02x (%s)\n", + dev_dbg(dev, "rx%u: client 0x%02x mapped at alias 0x%02x (%s)\n", rxport->nport, client->addr, alias, client->name); out: @@ -1022,7 +1038,7 @@ static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id, unsigned int pool_idx; u16 alias = 0; - dev_dbg(dev, "rx%d: %s\n", chan_id, __func__); + dev_dbg(dev, "rx%u: %s\n", chan_id, __func__); mutex_lock(&priv->atr_alias_table.lock); @@ -1037,7 +1053,7 @@ static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id, } if (pool_idx == priv->atr_alias_table.num_entries) { - dev_err(dev, "rx%d: client 0x%02x is not mapped!\n", + dev_err(dev, "rx%u: client 0x%02x is not mapped!\n", rxport->nport, client->addr); goto out; } @@ -1052,7 +1068,7 @@ static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id, entry->reserved = false; - dev_dbg(dev, "rx%d: client 0x%02x unmapped from alias 0x%02x (%s)\n", + dev_dbg(dev, "rx%u: client 0x%02x unmapped from alias 0x%02x (%s)\n", rxport->nport, client->addr, alias, client->name); out: @@ -1069,19 +1085,14 @@ static const struct i2c_atr_ops ub960_atr_ops = { */ static int ub960_parse_dt_txport(struct ub960_data *priv, - const struct device_node *np, u8 nport) + const struct fwnode_handle *ep_fwnode, + u8 nport) { struct device *dev = &priv->client->dev; struct ub960_txport *txport; int ret; u64 freq; - if (priv->txports[nport]) { - dev_err(dev, "OF: %s: duplicate tx port\n", - of_node_full_name(np)); - return -EADDRINUSE; - } - txport = kzalloc(sizeof(*txport), GFP_KERNEL); if (!txport) return -ENOMEM; @@ -1091,42 +1102,36 @@ static int ub960_parse_dt_txport(struct ub960_data *priv, priv->txports[nport] = txport; - ret = of_property_count_u32_elems(np, "data-lanes"); - + ret = fwnode_property_count_u32(ep_fwnode, "data-lanes"); if (ret <= 0) { - dev_err(dev, "OF: %s: failed to parse data-lanes: %d\n", - of_node_full_name(np), ret); + dev_err(dev, "tx%u: failed to parse 'data-lanes': %d\n", nport, + ret); goto err_free_txport; } txport->num_data_lanes = ret; - ret = of_property_count_u64_elems(np, "link-frequencies"); + ret = fwnode_property_count_u64(ep_fwnode, "link-frequencies"); if (ret < 0) { - dev_err(dev, "OF: %s: failed to parse link-frequencies: %d\n", - of_node_full_name(np), ret); + dev_err(dev, "tx%u: failed to parse 'link-frequencies': %d\n", + nport, ret); goto err_free_txport; } if (ret != 1) { - dev_err(dev, "OF: %s: link-frequencies must contain a single frequency: %d\n", - of_node_full_name(np), ret); + dev_err(dev, + "tx%u: 'link-frequencies' must contain a single frequency: %d\n", + nport, ret); goto err_free_txport; } - ret = of_property_read_u64(np, "link-frequencies", &freq); + ret = fwnode_property_read_u64(ep_fwnode, "link-frequencies", &freq); if (ret) { - dev_err(dev, "OF: %s: failed to read link frequency: %d\n", - of_node_full_name(np), ret); + dev_err(dev, "tx%u: failed to read 'link-frequencies': %d\n", + nport, ret); goto err_free_txport; } - if (of_property_read_u32(np, "link-frequencies", &priv->tx_data_rate) != 0) { - dev_err(dev, "OF: %s: missing \"data-rate\" node\n", - of_node_full_name(np)); - return -EINVAL; - } - priv->tx_link_freq[0] = freq; priv->tx_data_rate = freq * 2; @@ -1134,12 +1139,11 @@ static int ub960_parse_dt_txport(struct ub960_data *priv, priv->tx_data_rate != 1200000000 && priv->tx_data_rate != 800000000 && priv->tx_data_rate != 400000000) { - dev_err(dev, "OF: %s: invalid \"link-frequencies\" value\n", - of_node_full_name(np)); + dev_err(dev, "tx%u: invalid 'link-frequencies' value\n", nport); return -EINVAL; } - dev_dbg(dev, "Nominal data rate: %u", priv->tx_data_rate); + dev_dbg(dev, "tx%u: nominal data rate: %u", nport, priv->tx_data_rate); return 0; @@ -1651,13 +1655,14 @@ static int ub960_rxport_add_serializer(struct ub960_data *priv, u8 nport) struct device *dev = &priv->client->dev; struct ds90ub9xx_platform_data *ser_pdata = &rxport->ser_platform_data; struct i2c_board_info ser_info = { - .of_node = rxport->remote_of_node, + .of_node = to_of_node(rxport->remote_fwnode), + .fwnode = rxport->remote_fwnode, .platform_data = ser_pdata, }; ser_pdata->port = nport; ser_pdata->atr = priv->atr; - if (priv->hw_data->ub9702) + if (priv->hw_data->is_ub9702) ser_pdata->bc_rate = ub960_calc_bc_clk_rate_ub9702(priv, rxport); else ser_pdata->bc_rate = ub960_calc_bc_clk_rate_ub960(priv, rxport); @@ -1671,12 +1676,12 @@ static int ub960_rxport_add_serializer(struct ub960_data *priv, u8 nport) rxport->ser_client = i2c_new_client_device(priv->client->adapter, &ser_info); if (!rxport->ser_client) { - dev_err(dev, "rx%d: cannot add %s i2c device", nport, + dev_err(dev, "rx%u: cannot add %s i2c device", nport, ser_info.type); return -EIO; } - dev_dbg(dev, "rx%d: remote serializer at alias 0x%02x (%u-%04x)\n", + dev_dbg(dev, "rx%u: remote serializer at alias 0x%02x (%u-%04x)\n", nport, rxport->ser_client->addr, rxport->ser_client->adapter->nr, rxport->ser_client->addr); @@ -1788,7 +1793,7 @@ static int ub960_init_tx_ports(struct ub960_data *priv) ub960_write(priv, UB960_SR_CSI_PLL_CTL, speed_select); - if (priv->hw_data->ub9702) { + if (priv->hw_data->is_ub9702) { ub960_write(priv, UB960_SR_CSI_PLL_DIV, pll_div); switch (priv->tx_data_rate) { @@ -1838,10 +1843,6 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv, */ switch (rxport->rx_mode) { - default: - WARN_ON(true); - fallthrough; - case RXPORT_MODE_RAW10: case RXPORT_MODE_RAW12_HF: case RXPORT_MODE_RAW12_LF: @@ -1855,6 +1856,10 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv, case RXPORT_MODE_CSI2_SYNC: bc_freq_val = 6; break; + + default: + WARN_ON(true); + return; } ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, 0x7, @@ -1947,7 +1952,7 @@ static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv, default: WARN_ON(true); - break; + return; } ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, 0x7, @@ -2041,7 +2046,7 @@ static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv, default: WARN_ON(true); - break; + return; } ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, 0x7, @@ -2141,7 +2146,7 @@ static int ub960_init_rx_ports(struct ub960_data *priv) if (!rxport) continue; - if (priv->hw_data->ub9702) + if (priv->hw_data->is_ub9702) ub960_init_rx_port_ub9702(priv, rxport); else ub960_init_rx_port_ub960(priv, rxport); @@ -2181,66 +2186,66 @@ static void ub960_rxport_handle_events(struct ub960_data *priv, u8 nport) ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v1); ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v2); - dev_err(dev, "RX%u parity errors: %u\n", nport, (v1 << 8) | v2); + dev_err(dev, "rx%u parity errors: %u\n", nport, (v1 << 8) | v2); } if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_BCC_CRC_ERROR) - dev_err(dev, "RX%u BCC CRC error\n", nport); + dev_err(dev, "rx%u BCC CRC error\n", nport); if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_BCC_SEQ_ERROR) - dev_err(dev, "RX%u BCC SEQ error\n", nport); + dev_err(dev, "rx%u BCC SEQ error\n", nport); if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_LINE_LEN_UNSTABLE) - dev_err(dev, "RX%u line length unstable\n", nport); + dev_err(dev, "rx%u line length unstable\n", nport); if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_FPD3_ENCODE_ERROR) - dev_err(dev, "RX%u FPD3 encode error\n", nport); + dev_err(dev, "rx%u FPD3 encode error\n", nport); if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_BUFFER_ERROR) - dev_err(dev, "RX%u buffer error\n", nport); + dev_err(dev, "rx%u buffer error\n", nport); if (csi_rx_sts) - dev_err(dev, "RX%u CSI error: %#02x\n", nport, csi_rx_sts); + dev_err(dev, "rx%u CSI error: %#02x\n", nport, csi_rx_sts); if (csi_rx_sts & UB960_RR_CSI_RX_STS_ECC1_ERR) - dev_err(dev, "RX%u CSI ECC1 error\n", nport); + dev_err(dev, "rx%u CSI ECC1 error\n", nport); if (csi_rx_sts & UB960_RR_CSI_RX_STS_ECC2_ERR) - dev_err(dev, "RX%u CSI ECC2 error\n", nport); + dev_err(dev, "rx%u CSI ECC2 error\n", nport); if (csi_rx_sts & UB960_RR_CSI_RX_STS_CKSUM_ERR) - dev_err(dev, "RX%u CSI checksum error\n", nport); + dev_err(dev, "rx%u CSI checksum error\n", nport); if (csi_rx_sts & UB960_RR_CSI_RX_STS_LENGTH_ERR) - dev_err(dev, "RX%u CSI length error\n", nport); + dev_err(dev, "rx%u CSI length error\n", nport); if (bcc_sts) - dev_err(dev, "RX%u BCC error: %#02x\n", nport, bcc_sts); + dev_err(dev, "rx%u BCC error: %#02x\n", nport, bcc_sts); if (bcc_sts & UB960_RR_BCC_STATUS_RESP_ERR) - dev_err(dev, "RX%u BCC response error", nport); + dev_err(dev, "rx%u BCC response error", nport); if (bcc_sts & UB960_RR_BCC_STATUS_SLAVE_TO) - dev_err(dev, "RX%u BCC slave timeout", nport); + dev_err(dev, "rx%u BCC slave timeout", nport); if (bcc_sts & UB960_RR_BCC_STATUS_SLAVE_ERR) - dev_err(dev, "RX%u BCC slave error", nport); + dev_err(dev, "rx%u BCC slave error", nport); if (bcc_sts & UB960_RR_BCC_STATUS_MASTER_TO) - dev_err(dev, "RX%u BCC master timeout", nport); + dev_err(dev, "rx%u BCC master timeout", nport); if (bcc_sts & UB960_RR_BCC_STATUS_MASTER_ERR) - dev_err(dev, "RX%u BCC master error", nport); + dev_err(dev, "rx%u BCC master error", nport); if (bcc_sts & UB960_RR_BCC_STATUS_SEQ_ERROR) - dev_err(dev, "RX%u BCC sequence error", nport); + dev_err(dev, "rx%u BCC sequence error", nport); if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_LINE_LEN_CHG) { u8 v1, v2; ub960_rxport_read(priv, nport, UB960_RR_LINE_LEN_1, &v1); ub960_rxport_read(priv, nport, UB960_RR_LINE_LEN_0, &v2); - dev_dbg(dev, "RX%u line len changed: %u\n", nport, + dev_dbg(dev, "rx%u line len changed: %u\n", nport, (v1 << 8) | v2); } @@ -2249,16 +2254,24 @@ static void ub960_rxport_handle_events(struct ub960_data *priv, u8 nport) ub960_rxport_read(priv, nport, UB960_RR_LINE_COUNT_HI, &v1); ub960_rxport_read(priv, nport, UB960_RR_LINE_COUNT_LO, &v2); - dev_dbg(dev, "RX%u line count changed: %u\n", nport, + dev_dbg(dev, "rx%u line count changed: %u\n", nport, (v1 << 8) | v2); } if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_LOCK_STS_CHG) { - dev_dbg(dev, "RX%u: %s, %s, %s, %s\n", nport, - (rx_port_sts1 & UB960_RR_RX_PORT_STS1_LOCK_STS) ? "locked" : "unlocked", - (rx_port_sts1 & UB960_RR_RX_PORT_STS1_PORT_PASS) ? "passed" : "not passed", - (rx_port_sts2 & UB960_RR_RX_PORT_STS2_CABLE_FAULT) ? "no clock" : "clock ok", - (rx_port_sts2 & UB960_RR_RX_PORT_STS2_FREQ_STABLE) ? "stable freq" : "unstable freq"); + dev_dbg(dev, "rx%u: %s, %s, %s, %s\n", nport, + (rx_port_sts1 & UB960_RR_RX_PORT_STS1_LOCK_STS) ? + "locked" : + "unlocked", + (rx_port_sts1 & UB960_RR_RX_PORT_STS1_PORT_PASS) ? + "passed" : + "not passed", + (rx_port_sts2 & UB960_RR_RX_PORT_STS2_CABLE_FAULT) ? + "no clock" : + "clock ok", + (rx_port_sts2 & UB960_RR_RX_PORT_STS2_FREQ_STABLE) ? + "stable freq" : + "unstable freq"); } } @@ -2340,8 +2353,6 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, struct v4l2_subdev_state *state) { const struct v4l2_subdev_krouting *routing = &state->routing; - unsigned int i; - unsigned int nport; u8 fwd_ctl; struct { u32 num_streams; @@ -2354,7 +2365,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, ub960_get_vc_maps(priv, state, vc_map); - for (i = 0; i < routing->num_routes; ++i) { + for (unsigned int i = 0; i < routing->num_routes; ++i) { struct v4l2_subdev_route *route = &routing->routes[i]; struct ub960_rxport *rxport; struct ub960_txport *txport; @@ -2384,7 +2395,8 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, if (rx_data[nport].num_streams > 2) return -EPIPE; - fmt = v4l2_subdev_state_get_stream_format(state, route->sink_pad, + fmt = v4l2_subdev_state_get_stream_format(state, + route->sink_pad, route->sink_stream); if (!fmt) return -EPIPE; @@ -2396,8 +2408,8 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, if (ub960_fmt->meta) { if (fmt->height > 3) { dev_err(&priv->client->dev, - "Unsupported metadata height %u\n", - fmt->height); + "rx%u: unsupported metadata height %u\n", + nport, fmt->height); return -EPIPE; } @@ -2412,7 +2424,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, fwd_ctl = 0; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (unsigned int nport = 0; nport < priv->hw_data->num_rxports; ++nport) { struct ub960_rxport *rxport = priv->rxports[nport]; u8 vc = vc_map[nport]; @@ -2429,14 +2441,15 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, rx_data[nport].pixel_dt | (vc << 6)); ub960_rxport_write(priv, rxport->nport, - UB960_RR_RAW_EMBED_DTYPE, - (rx_data[nport].meta_lines << 6) | rx_data[nport].meta_dt); + UB960_RR_RAW_EMBED_DTYPE, + (rx_data[nport].meta_lines << 6) | + rx_data[nport].meta_dt); break; case RXPORT_MODE_CSI2_SYNC: case RXPORT_MODE_CSI2_ASYNC: - if (!priv->hw_data->ub9702) { + if (!priv->hw_data->is_ub9702) { /* Map all VCs from this port to the same VC */ ub960_rxport_write(priv, nport, UB960_RR_CSI_VC_MAP, (vc << 6) | (vc << 4) | @@ -2447,7 +2460,8 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, /* Map all VCs from this port to VC(nport) */ for (i = 0; i < 8; ++i) ub960_rxport_write(priv, nport, - UB960_RR_VC_ID_MAP(i), nport); + UB960_RR_VC_ID_MAP(i), + nport); } break; @@ -2545,9 +2559,6 @@ static int ub960_enable_streams(struct v4l2_subdev *sd, } for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { - struct v4l2_subdev *source_sd; - struct media_pad *source_sd_pad; - if (!sink_streams[nport]) continue; @@ -2565,11 +2576,10 @@ static int ub960_enable_streams(struct v4l2_subdev *sd, dev_dbg(dev, "Enable RX port %u streams %#llx\n", nport, sink_streams[nport]); - source_sd_pad = media_pad_remote_pad_first(&priv->pads[nport]); - source_sd = priv->rxports[nport]->sd; - ret = v4l2_subdev_enable_streams( - source_sd, source_sd_pad->index, sink_streams[nport]); + priv->rxports[nport]->source_sd, + priv->rxports[nport]->source_sd_pad, + sink_streams[nport]); if (ret) { priv->stream_enable_mask[nport] &= ~sink_streams[nport]; @@ -2587,20 +2597,16 @@ static int ub960_enable_streams(struct v4l2_subdev *sd, err: for (nport = 0; nport < failed_port; ++nport) { - struct v4l2_subdev *source_sd; - struct media_pad *source_sd_pad; - if (!sink_streams[nport]) continue; dev_dbg(dev, "Disable RX port %u streams %#llx\n", nport, sink_streams[nport]); - source_sd_pad = media_pad_remote_pad_first(&priv->pads[nport]); - source_sd = priv->rxports[nport]->sd; - ret = v4l2_subdev_disable_streams( - source_sd, source_sd_pad->index, sink_streams[nport]); + priv->rxports[nport]->source_sd, + priv->rxports[nport]->source_sd_pad, + sink_streams[nport]); WARN_ON(ret); priv->stream_enable_mask[nport] &= ~sink_streams[nport]; @@ -2665,20 +2671,16 @@ static int ub960_disable_streams(struct v4l2_subdev *sd, } for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { - struct v4l2_subdev *source_sd; - struct media_pad *source_sd_pad; - if (!sink_streams[nport]) continue; dev_dbg(dev, "Disable RX port %u streams %#llx\n", nport, sink_streams[nport]); - source_sd_pad = media_pad_remote_pad_first(&priv->pads[nport]); - source_sd = priv->rxports[nport]->sd; - ret = v4l2_subdev_disable_streams( - source_sd, source_sd_pad->index, sink_streams[nport]); + priv->rxports[nport]->source_sd, + priv->rxports[nport]->source_sd_pad, + sink_streams[nport]); WARN_ON(ret); priv->stream_enable_mask[nport] &= ~sink_streams[nport]; @@ -2748,9 +2750,9 @@ static int ub960_s_stream(struct v4l2_subdev *sd, int enable) if (pad_stream_masks[nport] == 0) continue; - ub960_disable_streams( - sd, state, priv->hw_data->num_rxports + nport, - pad_stream_masks[nport]); + ub960_disable_streams(sd, state, + priv->hw_data->num_rxports + nport, + pad_stream_masks[nport]); } } @@ -2816,27 +2818,6 @@ static int ub960_set_routing(struct v4l2_subdev *sd, return _ub960_set_routing(sd, state, routing); } -static int ub960_get_source_frame_desc(struct ub960_data *priv, - struct v4l2_mbus_frame_desc *desc, - u8 nport) -{ - struct v4l2_subdev *sd; - struct media_pad *pad; - int ret; - - pad = media_pad_remote_pad_first(&priv->pads[nport]); - if (!pad) - return -EPIPE; - - sd = priv->rxports[nport]->sd; - - ret = v4l2_subdev_call(sd, pad, get_frame_desc, pad->index, desc); - if (ret) - return ret; - - return 0; -} - static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, struct v4l2_mbus_frame_desc *fd) { @@ -2851,37 +2832,41 @@ static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, if (!ub960_pad_is_source(priv, pad)) return -EINVAL; + memset(fd, 0, sizeof(*fd)); + + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; + state = v4l2_subdev_lock_and_get_active_state(&priv->sd); ub960_get_vc_maps(priv, state, vc_map); routing = &state->routing; - memset(fd, 0, sizeof(*fd)); - - fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; - for_each_active_route(routing, route) { struct v4l2_mbus_frame_desc_entry *source_entry = NULL; struct v4l2_mbus_frame_desc source_fd; - unsigned int j; - unsigned int nrxport; + unsigned int nport; + unsigned int i; if (route->source_pad != pad) continue; - ret = ub960_get_source_frame_desc(priv, &source_fd, - route->sink_pad); + nport = ub960_pad_to_port(priv, route->sink_pad); + + ret = v4l2_subdev_call(priv->rxports[nport]->source_sd, pad, + get_frame_desc, + priv->rxports[nport]->source_sd_pad, + &source_fd); if (ret) { dev_err(dev, - "Failed to get source frame desc for port %u\n", + "Failed to get source frame desc for pad %u\n", route->sink_pad); goto out; } - for (j = 0; j < source_fd.num_entries; ++j) - if (source_fd.entry[j].stream == route->sink_stream) { - source_entry = &source_fd.entry[j]; + for (i = 0; i < source_fd.num_entries; ++i) + if (source_fd.entry[i].stream == route->sink_stream) { + source_entry = &source_fd.entry[i]; break; } @@ -2897,9 +2882,7 @@ static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, fd->entry[fd->num_entries].length = source_entry->length; fd->entry[fd->num_entries].pixelcode = source_entry->pixelcode; - nrxport = ub960_pad_to_port(priv, route->sink_pad); - - fd->entry[fd->num_entries].bus.csi2.vc = vc_map[nrxport]; + fd->entry[fd->num_entries].bus.csi2.vc = vc_map[nport]; if (source_fd.type == V4L2_MBUS_FRAME_DESC_TYPE_CSI2) { fd->entry[fd->num_entries].bus.csi2.dt = @@ -2908,8 +2891,8 @@ static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, const struct ub960_format_info *ub960_fmt; struct v4l2_mbus_framefmt *fmt; - fmt = v4l2_subdev_state_get_stream_format( - state, pad, route->source_stream); + fmt = v4l2_subdev_state_get_stream_format(state, pad, + route->source_stream); if (!fmt) { ret = -EINVAL; @@ -3012,12 +2995,11 @@ static int ub960_log_status(struct v4l2_subdev *sd) struct v4l2_subdev_state *state; unsigned int nport; u8 v = 0, v1 = 0, v2 = 0; - unsigned int i; char id[7]; state = v4l2_subdev_lock_and_get_active_state(sd); - for (i = 0; i < 6; ++i) + for (unsigned int i = 0; i < 6; ++i) ub960_read(priv, UB960_SR_FPD3_RX_ID(i), &id[i]); id[6] = 0; @@ -3034,7 +3016,8 @@ static int ub960_log_status(struct v4l2_subdev *sd) } ub960_csiport_read(priv, nport, UB960_TR_CSI_STS, &v); - dev_info(dev, "\tsync %u, pass %u\n", v & (u8)BIT(1), v & (u8)BIT(0)); + dev_info(dev, "\tsync %u, pass %u\n", v & (u8)BIT(1), + v & (u8)BIT(0)); ub960_read(priv, UB960_SR_CSI_FRAME_COUNT_HI(nport), &v1); ub960_read(priv, UB960_SR_CSI_FRAME_COUNT_LO(nport), &v2); @@ -3073,13 +3056,14 @@ static int ub960_log_status(struct v4l2_subdev *sd) else dev_info(dev, "\tNot locked\n"); - dev_info(dev, "\trx_port_sts1 %#x\n", v); + dev_info(dev, "\trx_port_sts1 %#02x\n", v); ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &v); - dev_info(dev, "\trx_port_sts2 %#x\n", v); + dev_info(dev, "\trx_port_sts2 %#02x\n", v); ub960_rxport_read(priv, nport, UB960_RR_RX_FREQ_HIGH, &v1); ub960_rxport_read(priv, nport, UB960_RR_RX_FREQ_LOW, &v2); - dev_info(dev, "\tlink freq %u MHz\n", v1 * 1000000 + v2 * 1000000 / 256); + dev_info(dev, "\tlink freq %u MHz\n", + v1 * 1000000 + v2 * 1000000 / 256); ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v1); ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v2); @@ -3132,9 +3116,8 @@ static int ub960_log_status(struct v4l2_subdev *sd) (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf); } - ub960_rxport_get_eq_level(priv, nport, &eq_level); - - dev_info(dev, "\tEQ level %u\n", eq_level); + if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0) + dev_info(dev, "\tEQ level %u\n", eq_level); /* GPIOs */ for (i = 0; i < UB960_NUM_BC_GPIOS; ++i) { @@ -3157,15 +3140,15 @@ static int ub960_log_status(struct v4l2_subdev *sd) } static const struct v4l2_subdev_core_ops ub960_subdev_core_ops = { - .log_status = ub960_log_status, - .subscribe_event = v4l2_ctrl_subdev_subscribe_event, - .unsubscribe_event = v4l2_event_subdev_unsubscribe, + .log_status = ub960_log_status, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, }; static const struct v4l2_subdev_ops ub960_subdev_ops = { - .core = &ub960_subdev_core_ops, - .video = &ub960_video_ops, - .pad = &ub960_pad_ops, + .core = &ub960_subdev_core_ops, + .video = &ub960_video_ops, + .pad = &ub960_pad_ops, }; static const struct media_entity_operations ub960_entity_ops = { @@ -3303,7 +3286,7 @@ static irqreturn_t ub960_handle_events(int irq, void *arg) ub960_read(priv, UB960_SR_FWD_STS, &fwd_sts); - dev_dbg(&priv->client->dev, "FWD_STS %#x\n", fwd_sts); + dev_dbg(&priv->client->dev, "FWD_STS %#02x\n", fwd_sts); for (i = 0; i < priv->hw_data->num_txports; ++i) { if (int_sts & UB960_SR_INTERRUPT_STS_IS_CSI_TX(i)) @@ -3359,8 +3342,8 @@ static void ub960_rxport_free_ports(struct ub960_data *priv) if (!rxport) continue; - fwnode_handle_put(rxport->fwnode); - of_node_put(rxport->remote_of_node); + fwnode_handle_put(rxport->source_ep_fwnode); + fwnode_handle_put(rxport->remote_fwnode); kfree(rxport); priv->rxports[nport] = NULL; @@ -3369,13 +3352,12 @@ static void ub960_rxport_free_ports(struct ub960_data *priv) static int ub960_parse_dt_base(struct ub960_data *priv) { - struct device_node *np = priv->client->dev.of_node; struct device *dev = &priv->client->dev; size_t table_size; u16 *aliases; int ret; - ret = of_property_count_u16_elems(np, "i2c-alias-pool"); + ret = fwnode_property_count_u16(dev_fwnode(dev), "i2c-alias-pool"); if (ret < 0) { dev_err(dev, "Failed to count 'i2c-alias-pool' property: %d\n", ret); @@ -3398,8 +3380,8 @@ static int ub960_parse_dt_base(struct ub960_data *priv) if (!aliases) return -ENOMEM; - ret = of_property_read_u16_array(np, "i2c-alias-pool", aliases, - table_size); + ret = fwnode_property_read_u16_array(dev_fwnode(dev), "i2c-alias-pool", + aliases, table_size); if (ret < 0) { dev_err(dev, "Failed to read 'i2c-alias-pool' property: %d\n", ret); @@ -3417,47 +3399,50 @@ static int ub960_parse_dt_base(struct ub960_data *priv) return 0; } -static int ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, - struct device_node *np, - struct ub960_rxport *rxport) +static int +ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, + struct fwnode_handle *link_fwnode, + struct ub960_rxport *rxport) { struct device *dev = &priv->client->dev; - int ret; + unsigned int nport = rxport->nport; u32 rx_mode; u32 cdr_mode; s32 strobe_pos; u32 eq_level; - unsigned int nport = rxport->nport; + u32 ser_i2c_alias; + int ret; - ret = of_property_read_u32(np, "ti,cdr-mode", &cdr_mode); + ret = fwnode_property_read_u32(link_fwnode, "ti,cdr-mode", &cdr_mode); if (ret == -EINVAL) { cdr_mode = RXPORT_CDR_FPD3; } else if (ret < 0) { - dev_err(dev, "Failed to get RX port CDR mode: %d\n", ret); + dev_err(dev, "rx%u: failed to read 'ti,cdr-mode': %d\n", nport, + ret); return ret; } if (cdr_mode > RXPORT_CDR_LAST) { - dev_err(dev, "Bad RX port cdr %u\n", cdr_mode); + dev_err(dev, "rx%u: bad 'ti,cdr-mode' %u\n", nport, cdr_mode); return -EINVAL; } - if (!priv->hw_data->fpdlink4 && cdr_mode == RXPORT_CDR_FPD4) { - dev_err(dev, "FPD-Link 4 CDR not supported on RX port %u\n", - nport); + if (!priv->hw_data->is_fpdlink4 && cdr_mode == RXPORT_CDR_FPD4) { + dev_err(dev, "rx%u: FPD-Link 4 CDR not supported\n", nport); return -EINVAL; } rxport->cdr_mode = cdr_mode; - ret = of_property_read_u32(np, "ti,rx-mode", &rx_mode); + ret = fwnode_property_read_u32(link_fwnode, "ti,rx-mode", &rx_mode); if (ret < 0) { - dev_err(dev, "Missing RX port RX mode: %d\n", ret); + dev_err(dev, "rx%u: failed to read 'ti,rx-mode': %d\n", nport, + ret); return ret; } if (rx_mode > RXPORT_MODE_LAST) { - dev_err(dev, "Bad RX port RX mode %u\n", rx_mode); + dev_err(dev, "rx%u: bad 'ti,rx-mode' %u\n", nport, rx_mode); return -EINVAL; } @@ -3470,45 +3455,78 @@ static int ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, rxport->eq.aeq.eq_level_min = UB960_MIN_EQ_LEVEL; rxport->eq.aeq.eq_level_max = UB960_MAX_EQ_LEVEL; - ret = of_property_read_s32(np, "ti,strobe-pos", &strobe_pos); + ret = fwnode_property_read_u32(link_fwnode, "ti,strobe-pos", + &strobe_pos); if (ret) { if (ret != -EINVAL) { - dev_err(dev, "Failed to read 'ti,strobe-pos': %d\n", ret); + dev_err(dev, + "rx%u: failed to read 'ti,strobe-pos': %d\n", + nport, ret); return ret; } } else if (strobe_pos < UB960_MIN_MANUAL_STROBE_POS || strobe_pos > UB960_MAX_MANUAL_STROBE_POS) { - dev_err(dev, "Illegal 'strobe-pos' value: %d\n", strobe_pos); + dev_err(dev, "rx%u: illegal 'strobe-pos' value: %d\n", nport, + strobe_pos); } else { // NOTE: ignored unless global manual strobe pos is set rxport->eq.strobe_pos = strobe_pos; if (!priv->strobe.manual) - dev_warn(dev, "'ti,strobe-pos' ignored as 'ti,manual-strobe' not set\n"); + dev_warn(dev, + "rx%u: 'ti,strobe-pos' ignored as 'ti,manual-strobe' not set\n", + nport); } - ret = of_property_read_u32(np, "ti,eq-level", &eq_level); + ret = fwnode_property_read_u32(link_fwnode, "ti,eq-level", &eq_level); if (ret) { if (ret != -EINVAL) { - dev_err(dev, "Failed to read 'ti,eq-level': %d\n", ret); + dev_err(dev, "rx%u: failed to read 'ti,eq-level': %d\n", + nport, ret); return ret; } } else if (eq_level > UB960_MAX_EQ_LEVEL) { - dev_err(dev, "Illegal 'ti,eq-level' value: %d\n", eq_level); + dev_err(dev, "rx%u: illegal 'ti,eq-level' value: %d\n", nport, + eq_level); } else { rxport->eq.manual_eq = true; rxport->eq.manual.eq_level = eq_level; } + ret = fwnode_property_read_u32(link_fwnode, "i2c-alias", + &ser_i2c_alias); + if (ret) { + dev_err(dev, "rx%u: failed to read 'i2c-alias': %d\n", nport, + ret); + return ret; + } + rxport->ser_alias = ser_i2c_alias; + + rxport->remote_fwnode = fwnode_get_named_child_node(link_fwnode, "serializer"); + if (!rxport->remote_fwnode) { + dev_err(dev, "rx%u: missing 'serializer' node\n", nport); + return -EINVAL; + } + return 0; } -static int ub960_parse_dt_rxport_ep_properties(struct ub960_data *priv, struct ub960_rxport *rxport) +static int ub960_parse_dt_rxport_ep_properties(struct ub960_data *priv, + struct fwnode_handle *ep_fwnode, + struct ub960_rxport *rxport) { struct device *dev = &priv->client->dev; - struct device_node *ep_np; + unsigned int nport = rxport->nport; int ret; u32 v; + rxport->source_ep_fwnode = fwnode_graph_get_remote_endpoint(ep_fwnode); + if (!rxport->source_ep_fwnode) { + dev_err(dev, "rx%u: no remote endpoint\n", nport); + return -ENODEV; + } + + /* We currently have properties only for RAW modes */ + switch (rxport->rx_mode) { case RXPORT_MODE_RAW10: case RXPORT_MODE_RAW12_HF: @@ -3518,59 +3536,40 @@ static int ub960_parse_dt_rxport_ep_properties(struct ub960_data *priv, struct u return 0; } - ep_np = of_graph_get_endpoint_by_regs(priv->client->dev.of_node, - rxport->nport, 0); - if (!ep_np) - return -EINVAL; - - ret = of_property_read_u32(ep_np, "hsync-active", &v); + ret = fwnode_property_read_u32(ep_fwnode, "hsync-active", &v); if (ret) { - dev_err(dev, "Failed to parse 'hsync-active' for port %u: %d\n", - rxport->nport, ret); - goto err; + dev_err(dev, "rx%u: failed to parse 'hsync-active': %d\n", + nport, ret); + goto err_put_source_ep_fwnode; } rxport->lv_fv_pol |= v ? UB960_RR_PORT_CONFIG2_LV_POL_LOW : 0; - ret = of_property_read_u32(ep_np, "vsync-active", &v); + ret = fwnode_property_read_u32(ep_fwnode, "vsync-active", &v); if (ret) { - dev_err(dev, "Failed to parse 'vsync-active' for port %u: %d\n", - rxport->nport, ret); - goto err; + dev_err(dev, "rx%u: failed to parse 'vsync-active': %d\n", + nport, ret); + goto err_put_source_ep_fwnode; } rxport->lv_fv_pol |= v ? UB960_RR_PORT_CONFIG2_FV_POL_LOW : 0; return 0; -err: - of_node_put(ep_np); + +err_put_source_ep_fwnode: + fwnode_handle_put(rxport->source_ep_fwnode); return ret; } -static int ub960_parse_dt_rxport(struct ub960_data *priv, - struct device_node *np) +static int ub960_parse_dt_rxport(struct ub960_data *priv, unsigned int nport, + struct fwnode_handle *link_fwnode, + struct fwnode_handle *ep_fwnode) { const char *vpoc_names[UB960_MAX_RX_NPORTS] = { "vpoc0", "vpoc1", "vpoc2", "vpoc3" }; struct device *dev = &priv->client->dev; - unsigned int nport; - int ret; struct ub960_rxport *rxport; - u32 ser_i2c_alias; - struct device_node *ep_np; - struct fwnode_handle *remote_ep_node; - - ret = of_property_read_u32(np, "reg", &nport); - if (ret) { - dev_err(dev, "Failed to get link reg\n"); - return ret; - } - - if (priv->rxports[nport]) { - dev_err(dev, "OF: %s: reg value %d is duplicated\n", - of_node_full_name(np), nport); - return -EADDRINUSE; - } + int ret; rxport = kzalloc(sizeof(*rxport), GFP_KERNEL); if (!rxport) @@ -3581,92 +3580,56 @@ static int ub960_parse_dt_rxport(struct ub960_data *priv, rxport->nport = nport; rxport->priv = priv; - ret = ub960_parse_dt_rxport_link_properties(priv, np, rxport); + ret = ub960_parse_dt_rxport_link_properties(priv, link_fwnode, rxport); if (ret) goto err_free_rxport; - ret = of_property_read_u32(np, "i2c-alias", &ser_i2c_alias); - if (ret) { - dev_err(dev, "Failed to get serializer i2c-alias: %d\n", ret); - goto err_free_rxport; - } - rxport->ser_alias = ser_i2c_alias; - rxport->vpoc = devm_regulator_get_optional(dev, vpoc_names[nport]); if (IS_ERR(rxport->vpoc)) { ret = PTR_ERR(rxport->vpoc); if (ret == -ENODEV) { rxport->vpoc = NULL; } else { - dev_err(dev, "Failed to get VPOC supply: %d\n", ret); - goto err_free_rxport; + dev_err(dev, "rx%u: failed to get VPOC supply: %d\n", + nport, ret); + goto err_put_remote_fwnode; } } - rxport->remote_of_node = of_get_child_by_name(np, "serializer"); - if (!rxport->remote_of_node) { - dev_err(dev, "OF: %s: missing remote-chip child\n", - of_node_full_name(np)); - ret = -EINVAL; - goto err_free_rxport; - } - - /* We also parse the endpoint data here */ - - ep_np = of_graph_get_endpoint_by_regs(priv->client->dev.of_node, nport, 0); - if (!ep_np) { - dev_err(dev, "Missing OF graph endpoint for link %u\n", nport); - ret = -EINVAL; - goto err_ser_node_put; - } - - remote_ep_node = fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep_np)); - - of_node_put(ep_np); - - if (!remote_ep_node) { - dev_err(dev, "No remote endpoint for rxport%d\n", nport); - ret = -ENODEV; - goto err_ser_node_put; - } - - rxport->fwnode = remote_ep_node; - - ret = ub960_parse_dt_rxport_ep_properties(priv, rxport); + ret = ub960_parse_dt_rxport_ep_properties(priv, ep_fwnode, rxport); if (ret) - goto err_remote_ep_node_put; + goto err_put_remote_fwnode; return 0; -err_remote_ep_node_put: - fwnode_handle_put(rxport->fwnode); -err_ser_node_put: - of_node_put(rxport->remote_of_node); +err_put_remote_fwnode: + fwnode_handle_put(rxport->remote_fwnode); err_free_rxport: priv->rxports[nport] = NULL; kfree(rxport); return ret; } -static struct device_node * -ub960_of_get_link_by_regs(struct device_node *links_np, unsigned int nport) +static struct fwnode_handle * +ub960_fwnode_get_link_by_regs(struct fwnode_handle *links_fwnode, + unsigned int nport) { - struct device_node *link_np; + struct fwnode_handle *link_fwnode; int ret; - for_each_child_of_node(links_np, link_np) { + fwnode_for_each_child_node(links_fwnode, link_fwnode) { u32 link_num; - if (!of_node_name_eq(link_np, "link")) + if (strncmp(fwnode_get_name(link_fwnode), "link@", 5) != 0) continue; - ret = of_property_read_u32(link_np, "reg", &link_num); + ret = fwnode_property_read_u32(link_fwnode, "reg", &link_num); if (ret) return NULL; if (nport == link_num) { - of_node_get(link_np); - return link_np; + fwnode_handle_put(link_fwnode); + return link_fwnode; } } @@ -3675,15 +3638,14 @@ ub960_of_get_link_by_regs(struct device_node *links_np, unsigned int nport) static int ub960_parse_dt_rxports(struct ub960_data *priv) { - struct device_node *np = priv->client->dev.of_node; struct device *dev = &priv->client->dev; - struct device_node *links_np; + struct fwnode_handle *links_fwnode; unsigned int nport; int ret; - links_np = of_get_child_by_name(np, "links"); - if (!links_np) { - dev_err(dev, "links node missing\n"); + links_fwnode = fwnode_get_named_child_node(dev_fwnode(dev), "links"); + if (!links_fwnode) { + dev_err(dev, "'links' node missing\n"); return -ENODEV; } @@ -3691,51 +3653,62 @@ static int ub960_parse_dt_rxports(struct ub960_data *priv) priv->strobe.min = 2; priv->strobe.max = 3; - priv->strobe.manual = of_property_read_bool(links_np, "ti,manual-strobe"); + priv->strobe.manual = fwnode_property_read_bool(links_fwnode, "ti,manual-strobe"); for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { - struct device_node *link_np; + struct fwnode_handle *link_fwnode; + struct fwnode_handle *ep_fwnode; - link_np = ub960_of_get_link_by_regs(links_np, nport); - if (!link_np) + link_fwnode = ub960_fwnode_get_link_by_regs(links_fwnode, nport); + if (!link_fwnode) continue; - ret = ub960_parse_dt_rxport(priv, link_np); + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + nport, 0, 0); + if (!ep_fwnode) { + fwnode_handle_put(link_fwnode); + continue; + } + + ret = ub960_parse_dt_rxport(priv, nport, link_fwnode, + ep_fwnode); - of_node_put(link_np); + fwnode_handle_put(link_fwnode); + fwnode_handle_put(ep_fwnode); if (ret) { - dev_err(dev, "Failed to parse link node\n"); + dev_err(dev, "rx%u: failed to parse RX port\n", nport); goto err_put_links; } } - of_node_put(links_np); + fwnode_handle_put(links_fwnode); return 0; err_put_links: - of_node_put(links_np); + fwnode_handle_put(links_fwnode); return ret; } static int ub960_parse_dt_txports(struct ub960_data *priv) { - struct device_node *np = priv->client->dev.of_node; + struct device *dev = &priv->client->dev; u32 nport; int ret; for (nport = 0; nport < priv->hw_data->num_txports; ++nport) { - struct device_node *ep_np; + struct fwnode_handle *ep_fwnode; - ep_np = of_graph_get_endpoint_by_regs(np, nport + priv->hw_data->num_rxports, 0); - if (!ep_np) + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + nport + priv->hw_data->num_rxports, 0, 0); + if (!ep_fwnode) continue; - ret = ub960_parse_dt_txport(priv, ep_np, nport); + ret = ub960_parse_dt_txport(priv, ep_fwnode, nport); - of_node_put(ep_np); + fwnode_handle_put(ep_fwnode); if (ret) break; @@ -3746,15 +3719,8 @@ static int ub960_parse_dt_txports(struct ub960_data *priv) static int ub960_parse_dt(struct ub960_data *priv) { - struct device_node *np = priv->client->dev.of_node; - struct device *dev = &priv->client->dev; int ret; - if (!np) { - dev_err(dev, "OF: no device tree node!\n"); - return -ENOENT; - } - ret = ub960_parse_dt_base(priv); if (ret) return ret; @@ -3783,35 +3749,37 @@ static int ub960_notify_bound(struct v4l2_async_notifier *notifier, struct ub960_rxport *rxport = to_ub960_asd(asd)->rxport; struct device *dev = &priv->client->dev; u8 nport = rxport->nport; - unsigned int src_pad; unsigned int i; int ret; - ret = media_entity_get_fwnode_pad(&subdev->entity, rxport->fwnode, + ret = media_entity_get_fwnode_pad(&subdev->entity, + rxport->source_ep_fwnode, MEDIA_PAD_FL_SOURCE); if (ret < 0) { dev_err(dev, "Failed to find pad for %s\n", subdev->name); return ret; } - rxport->sd = subdev; - src_pad = ret; + rxport->source_sd = subdev; + rxport->source_sd_pad = ret; - ret = media_create_pad_link(&rxport->sd->entity, src_pad, - &priv->sd.entity, nport, + ret = media_create_pad_link(&rxport->source_sd->entity, + rxport->source_sd_pad, &priv->sd.entity, + nport, MEDIA_LNK_FL_ENABLED | - MEDIA_LNK_FL_IMMUTABLE); + MEDIA_LNK_FL_IMMUTABLE); if (ret) { dev_err(dev, "Unable to link %s:%u -> %s:%u\n", - rxport->sd->name, src_pad, priv->sd.name, nport); + rxport->source_sd->name, rxport->source_sd_pad, + priv->sd.name, nport); return ret; } - dev_dbg(dev, "Bound %s pad: %u on index %u\n", subdev->name, src_pad, - nport); + dev_dbg(dev, "Bound %s pad: %u on index %u\n", subdev->name, + rxport->source_sd_pad, nport); for (i = 0; i < priv->hw_data->num_rxports; ++i) { - if (priv->rxports[i] && !priv->rxports[i]->sd) { + if (priv->rxports[i] && !priv->rxports[i]->source_sd) { dev_dbg(dev, "Waiting for more subdevs to be bound\n"); return 0; } @@ -3828,7 +3796,7 @@ static void ub960_notify_unbind(struct v4l2_async_notifier *notifier, { struct ub960_rxport *rxport = to_ub960_asd(asd)->rxport; - rxport->sd = NULL; + rxport->source_sd = NULL; } static const struct v4l2_async_notifier_operations ub960_notify_ops = { @@ -3851,7 +3819,8 @@ static int ub960_v4l2_notifier_register(struct ub960_data *priv) if (!rxport) continue; - asd = v4l2_async_nf_add_fwnode(&priv->notifier, rxport->fwnode, + asd = v4l2_async_nf_add_fwnode(&priv->notifier, + rxport->source_ep_fwnode, struct ub960_asd); if (IS_ERR(asd)) { dev_err(dev, "Failed to add subdev for source %u: %ld", @@ -3906,14 +3875,15 @@ static int ub960_create_subdev(struct ub960_data *priv) goto err_free_ctrl; } - priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS | - V4L2_SUBDEV_FL_STREAMS; + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_STREAMS; priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; priv->sd.entity.ops = &ub960_entity_ops; for (i = 0; i < priv->hw_data->num_rxports + priv->hw_data->num_txports; i++) { priv->pads[i].flags = ub960_pad_is_sink(priv, i) ? - MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; + MEDIA_PAD_FL_SINK : + MEDIA_PAD_FL_SOURCE; } ret = media_entity_pads_init(&priv->sd.entity, @@ -4007,35 +3977,27 @@ static void ub960_reset(struct ub960_data *priv, bool reset_regs) static int ub960_get_hw_resources(struct ub960_data *priv) { struct device *dev = &priv->client->dev; - int ret; priv->regmap = devm_regmap_init_i2c(priv->client, &ub960_regmap_config); if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); priv->vddio = devm_regulator_get(dev, "vddio"); - if (IS_ERR(priv->vddio)) { - dev_err(dev, "cannot get VDDIO regulator\n"); - return PTR_ERR(priv->vddio); - } + if (IS_ERR(priv->vddio)) + return dev_err_probe(dev, PTR_ERR(priv->vddio), + "cannot get VDDIO regulator\n"); /* get power-down pin from DT */ priv->pd_gpio = devm_gpiod_get_optional(dev, "powerdown", GPIOD_OUT_HIGH); - if (IS_ERR(priv->pd_gpio)) { - ret = PTR_ERR(priv->pd_gpio); - if (ret != -EPROBE_DEFER) - dev_err(dev, "Cannot get powerdown GPIO (%d)", ret); - return ret; - } + if (IS_ERR(priv->pd_gpio)) + return dev_err_probe(dev, PTR_ERR(priv->pd_gpio), + "Cannot get powerdown GPIO\n"); priv->refclk = devm_clk_get(dev, "refclk"); - if (IS_ERR(priv->refclk)) { - ret = PTR_ERR(priv->refclk); - if (ret != -EPROBE_DEFER) - dev_err(dev, "Cannot get REFCLK (%d)", ret); - return ret; - } + if (IS_ERR(priv->refclk)) + return dev_err_probe(dev, PTR_ERR(priv->refclk), + "Cannot get REFCLK\n"); return 0; } @@ -4056,7 +4018,7 @@ static int ub960_enable_core_hw(struct ub960_data *priv) ret = clk_prepare_enable(priv->refclk); if (ret) { - dev_err(dev, "Failed to renable refclk: %d\n", ret); + dev_err(dev, "Failed to enable refclk: %d\n", ret); goto err_disable_vddio; } @@ -4159,7 +4121,7 @@ static int ub960_probe(struct i2c_client *client) goto err_mutex_destroy; /* release GPIO lock */ - if (priv->hw_data->ub9702) + if (priv->hw_data->is_ub9702) ub960_update_bits(priv, UB960_SR_RESET, UB960_SR_RESET_GPIO_LOCK_RELEASE, UB960_SR_RESET_GPIO_LOCK_RELEASE); @@ -4255,25 +4217,23 @@ static const struct ub960_hw_data ds90ub9702_hw = { .model = "ub9702", .num_rxports = 4, .num_txports = 2, - .ub9702 = true, - .fpdlink4 = true, + .is_ub9702 = true, + .is_fpdlink4 = true, }; static const struct i2c_device_id ub960_id[] = { { "ds90ub960-q1", 0 }, { "ds90ub9702-q1", 0 }, - { } + {} }; MODULE_DEVICE_TABLE(i2c, ub960_id); -#ifdef CONFIG_OF static const struct of_device_id ub960_dt_ids[] = { { .compatible = "ti,ds90ub960-q1", .data = &ds90ub960_hw }, { .compatible = "ti,ds90ub9702-q1", .data = &ds90ub9702_hw }, - { } + {} }; MODULE_DEVICE_TABLE(of, ub960_dt_ids); -#endif static struct i2c_driver ds90ub960_driver = { .probe_new = ub960_probe, @@ -4282,14 +4242,13 @@ static struct i2c_driver ds90ub960_driver = { .driver = { .name = "ds90ub960", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(ub960_dt_ids), + .of_match_table = ub960_dt_ids, }, }; - module_i2c_driver(ds90ub960_driver); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Texas Instruments DS90UB960-Q1 FPD-Link deserializer driver"); +MODULE_DESCRIPTION("Texas Instruments FPD-Link III/IV Deserializers Driver"); MODULE_AUTHOR("Luca Ceresoli "); MODULE_AUTHOR("Tomi Valkeinen "); MODULE_IMPORT_NS(I2C_ATR); diff --git a/include/linux/i2c-atr.h b/include/linux/i2c-atr.h index 5b879115dfc6..10a313ab2105 100644 --- a/include/linux/i2c-atr.h +++ b/include/linux/i2c-atr.h @@ -35,7 +35,6 @@ struct i2c_atr_ops { int (*select)(struct i2c_atr *atr, u32 chan_id); int (*deselect)(struct i2c_atr *atr, u32 chan_id); int (*attach_client)(struct i2c_atr *atr, u32 chan_id, - const struct i2c_board_info *info, const struct i2c_client *client, u16 *alias_id); void (*detach_client)(struct i2c_atr *atr, u32 chan_id, const struct i2c_client *client); diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 9a385b6de388..f7c49bbdb8a1 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -584,21 +584,6 @@ struct i2c_lock_operations { void (*unlock_bus)(struct i2c_adapter *adapter, unsigned int flags); }; -/** - * struct i2c_attach_operations - callbacks to notify client attach/detach - * @attach_client: Notify of new client being attached - * @detach_client: Notify of new client being detached - * - * Both ops are optional. - */ -struct i2c_attach_operations { - int (*attach_client)(struct i2c_adapter *adapter, - const struct i2c_board_info *info, - const struct i2c_client *client); - void (*detach_client)(struct i2c_adapter *adapter, - const struct i2c_client *client); -}; - /** * struct i2c_timings - I2C timing information * @bus_freq_hz: the bus frequency in Hz @@ -741,7 +726,6 @@ struct i2c_adapter { /* data fields that are valid for all devices */ const struct i2c_lock_operations *lock_ops; - const struct i2c_attach_operations *attach_ops; struct rt_mutex bus_lock; struct rt_mutex mux_lock; base-commit: 76dcd734eca23168cb008912c0f69ff408905235 prerequisite-patch-id: 341bbdcbd14f0b6f38c88f1390f9437873a03430 prerequisite-patch-id: e5d34269150d94ecb7fd670ad31e14aaae78e099 prerequisite-patch-id: 24ff7b1c013fa9acd8b93c2506eae39eb2a1021c prerequisite-patch-id: 15edf6091d7c2d340f25711961bb8459addc8d58 prerequisite-patch-id: 9beff6fd1d22dbfe565931de81b27739e45ced05 prerequisite-patch-id: 37bc00c7315371c9a906af0d718ecedd871a43e0 prerequisite-patch-id: 8218595c50635ab48a9c8cd8c580da9f431d539f prerequisite-patch-id: 7f163276a04d212d009ee6e96fb545d5b781cc44 prerequisite-patch-id: 0db299d92565612520411ef624e097131feb2d97 prerequisite-patch-id: 6b521ad1868b9a507930dd6a2e0e2d19b5947456 prerequisite-patch-id: d32e1105a1285cceac8fd8e84649070174a6b23e prerequisite-patch-id: 2927a4ef079c55e7807cda150d4b9eb29978136a prerequisite-patch-id: 77546a2e202557910e9a3635534163cc80134ea4 prerequisite-patch-id: 462fabb2b21019636e1f7e793dafc51caf40400e prerequisite-patch-id: 604c8c3f3e7fab7698eb73795bae573f88b808db prerequisite-patch-id: 75a3d7b072e718fb2bd854743b9b2023d68a822b prerequisite-patch-id: a9c64a3360938ac230261ffc3e0cbd8cb66550d3 prerequisite-patch-id: a5c57341047e53ecaeb28181319700dd3ace62aa prerequisite-patch-id: e9b8da97c9fea3cd3268adf8387cb3df179649e5 prerequisite-patch-id: 2767b8af9e0742b52b81b2dbce3b5ce5203e3610 -- 2.34.1