Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Neil Armstrong <neil.armstrong@linaro.org>
Date:   Wed, 18 Jan 2023 17:25:12 +0100
Subject: [PATCH v3 2/3] arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20221115-topic-sm8550-upstream-dts-remoteproc-v3-2-815a1753de34@linaro.org>
References: <20221115-topic-sm8550-upstream-dts-remoteproc-v3-0-815a1753de34@linaro.org>
In-Reply-To: <20221115-topic-sm8550-upstream-dts-remoteproc-v3-0-815a1753de34@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Abel Vesa <abel.vesa@linaro.org>,
        Neil Armstrong <neil.armstrong@linaro.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>
Precedence: bulk

This adds support for the aDSP, cDSP and MPSS Subsystems found in
the SM8550 SoC.

The aDSP, cDSP and MPSS needs:
- smp2p nodes to get event back from the subsystems
- remoteproc nodes with glink-edge subnodes providing all needed
  resources to start and run the subsystems

In addition, the MPSS Subsystem needs a rmtfs_mem dedicated
memory zone.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 337 +++++++++++++++++++++++++++++++++++
 1 file changed, 337 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index ee3e5150a976..bfdb10e00141 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -541,6 +541,15 @@ adspslpi_mem: adspslpi-region@9ea00000 {
 
 		/* Linux kernel image is loaded at 0xa8000000 */
 
+		rmtfs_mem: rmtfs-region@d4a80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xd4a80000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
 		mpss_dsm_mem: mpss-dsm-region@d4d00000 {
 			reg = <0 0xd4d00000 0 0x3300000>;
 			no-map;
@@ -632,6 +641,89 @@ hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
 		};
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		ranges = <0 0 0 0 0x10 0>;
@@ -1653,6 +1745,48 @@ tcsr: clock-controller@1fc0000 {
 			#reset-cells = <1>;
 		};
 
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8550-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8550_CX>,
+					<&rpmhpd SM8550_MSS>;
+			power-domain-names = "cx", "mss";
+
+			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+			};
+		};
+
 		lpass_lpiaon_noc: interconnect@7400000 {
 			compatible = "qcom,sm8550-lpass-lpiaon-noc";
 			reg = <0 0x07400000 0 0x19080>;
@@ -2700,12 +2834,215 @@ system-cache-controller@25000000 {
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8550-adsp-pas";
+			reg = <0x0 0x30000000 0x0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8550_LCX>,
+					<&rpmhpd SM8550_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x80>,
+						         <&apps_smmu 0x1063 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1064 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1065 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x80>,
+						         <&apps_smmu 0x1066 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x80>,
+						         <&apps_smmu 0x1067 0x0>;
+					};
+				};
+			};
+		};
+
 		nsp_noc: interconnect@320c0000 {
 			compatible = "qcom,sm8550-nsp-noc";
 			reg = <0 0x320c0000 0 0xe080>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8550-cdsp-pas";
+			reg = <0x0 0x32300000 0x0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8550_CX>,
+					<&rpmhpd SM8550_MXC>,
+					<&rpmhpd SM8550_NSP>;
+			power-domain-names = "cx", "mxc", "nsp";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1961 0x0>,
+							 <&apps_smmu 0x0c01 0x20>,
+							 <&apps_smmu 0x19c1 0x10>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x19c2 0x10>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c03 0x20>,
+							 <&apps_smmu 0x19c3 0x10>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c04 0x20>,
+							 <&apps_smmu 0x19c4 0x10>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c05 0x20>,
+							 <&apps_smmu 0x19c5 0x10>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x19c6 0x10>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c07 0x20>,
+							 <&apps_smmu 0x19c7 0x10>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x19c8 0x10>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
 	};
 
 	thermal-zones {

-- 
2.34.1