Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Jan Kiszka <jan.kiszka@siemens.com>
To:     Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, Bao Cheng Su <baocheng.su@siemens.com>,
        Chao Zeng <chao.zeng@siemens.com>
Subject: [PATCH v2 0/3] arm64: dts: Add IOT2050 M.2 board, describe QSPI layout
Date:   Thu, 19 Jan 2023 07:40:39 +0100
Message-Id: <cover.1674110442.git.jan.kiszka@siemens.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Feedback-ID: 519:519-294854:519-21489:flowmailer
Precedence: bulk

This adds the devices tree for a new variant of the IOT2050 which comes
with two M.2 slots and is otherwise almost equivalent to the existing
Advanced PG2 variant (USB3 is available via M.2 now).

Furthermore, the device tree of the whole device series is extended to
also hold the QSPI layout.

Changes in v2:
 - alphabetic ordering in binding schema and makefile
 - dropped an unneeded blank line in patch 3

Jan

Jan Kiszka (2):
  arm64: dts: ti: iot2050: Add layout of OSPI flash
  dt-bindings: arm: ti: Add binding for Siemens IOT2050 M.2 variant

chao zeng (1):
  arm64: dts: ti: iot2050: Add support for M.2 variant

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   3 +
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   |  46 +++++++
 .../dts/ti/k3-am6548-iot2050-advanced-m2.dts  | 121 ++++++++++++++++++
 4 files changed, 171 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts

-- 
2.35.3