Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1765913AbXHYAsB (ORCPT ); Fri, 24 Aug 2007 20:48:01 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1760274AbXHYArv (ORCPT ); Fri, 24 Aug 2007 20:47:51 -0400 Received: from out2.smtp.messagingengine.com ([66.111.4.26]:60921 "EHLO out2.smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755902AbXHYArr (ORCPT ); Fri, 24 Aug 2007 20:47:47 -0400 X-Sasl-enc: RAq4K+rpMTTsZynvSL5v1oCrgrpYVifDefNZgONPT29A 1188002864 Message-ID: <46CF7C3F.10707@imap.cc> Date: Sat, 25 Aug 2007 02:47:59 +0200 From: Tilman Schmidt Organization: me - organized?? User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; de-AT; rv:1.8.1.4) Gecko/20070509 SeaMonkey/1.1.2 Mnenhy/0.7.5.666 MIME-Version: 1.0 To: Andrew Morton CC: linux-kernel@vger.kernel.org, Thomas Gleixner , john stultz , Andi Kleen , Len Brown , linux-acpi@vger.kernel.org, Dave Jones , Thomas Renninger , Venkatesh Pallipadi Subject: Re: 2.6.23-rc3-mm1 References: <20070822020648.5ea3a612.akpm@linux-foundation.org> <46CF695D.1020008@imap.cc> <20070824170702.a2c51084.akpm@linux-foundation.org> In-Reply-To: <20070824170702.a2c51084.akpm@linux-foundation.org> X-Enigmail-Version: 0.95.1 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig409D29879952063DD3D04F5F" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 28868 Lines: 631 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig409D29879952063DD3D04F5F Content-Type: multipart/mixed; boundary="------------060401020703050807050402" This is a multi-part message in MIME format. --------------060401020703050807050402 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Am 25.08.2007 02:07 schrieb Andrew Morton: > On Sat, 25 Aug 2007 01:27:25 +0200 > Tilman Schmidt wrote: >=20 >> Am 22.08.2007 11:06 schrieb Andrew Morton: >>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23-= rc3/2.6.23-rc3-mm1/ >> After applying Matthew Wilcox' patch to include/linux/isa.h >=20 > which patch is that? The one allowing drivers/scsi/advansys.c to compile with CONFIG_ISA=3Dn: Date: Wed, 22 Aug 2007 10:28:02 -0600 From: Matthew Wilcox Subject: Re: drivers/scsi/advansys.c - ld error ( Re: 2.6.23-rc3-mm1 ) Message-ID: <20070822162802.GJ9163@parisc-linux.org> When CONFIG_ISA is disabled, the isa_driver support will not be compiled in. Define stubs so that we don't get link-time errors. >> this compiles >> and boots on my Intel/openSUSE 10.2 test machine but throws out the >> following messages I don't remember ever seeing with other kernels: >> >> - on console early during boot, also in SuSE's /var/log/boot.msg: >> >> your system time is not correct: >> Wed Jul 13 13:15:31 UTC 1910 >> setting system time to: >> Tue Jul 24 00:00:00 UTC 2007 >=20 > What architecture? i386. The machine is a Pentium D 940 which would be x86_64 capable, but I'm still running 32 bit kernels on it. > if x86_64 then perhaps something went wrong with the old x86_64 dyntick= s > leftovers which were in rc3-mm1. I've just merged a shiny fresh new se= ries > so perhaps things there got fixed. Please retest next -mm. Will do that anyway. > Perhaps it would be helpful if you could do a=20 >=20 > diff -u dmesg-2.6.23-rc3 dmesg-2.6.26-rc3-mm1 I hope the attached helps. I created it by taking /var/log/boot.msg of the two systems, removing everything after "Kernel logging stopped", editing out the printk timestamps and then running diff -u on them, so it should be more or less the dmesg diff. I did not edit out any of the differences because I'm lazy. (And also because I wasn't so sure what would or wouldn't be interesting for you.) --=20 Tilman Schmidt E-Mail: tilman@imap.cc Bonn, Germany Diese Nachricht besteht zu 100% aus wiederverwerteten Bits. Unge=F6ffnet mindestens haltbar bis: (siehe R=FCckseite) --------------060401020703050807050402 Content-Type: text/plain; name="bootmsg.diff" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline; filename="bootmsg.diff" --- /tmp/bootmsg-2.6.23-rc3 2007-08-25 02:25:54.000000000 +0200 +++ /tmp/bootmsg-2.6.23-rc3-mm1 2007-08-25 02:26:08.000000000 +0200 @@ -1,10 +1,10 @@ -Inspecting /boot/System.map-2.6.23-rc3-testing -Loaded 27522 symbols from /boot/System.map-2.6.23-rc3-testing. +Inspecting /boot/System.map-2.6.23-rc3-mm1-testing +Loaded 28663 symbols from /boot/System.map-2.6.23-rc3-mm1-testing. Symbols match kernel version 2.6.23. No module symbols loaded - kernel modules not enabled. =20 klogd 1.4.1, log source =3D ksyslog started. -<5>Linux version 2.6.23-rc3-testing (ts@xenon) (gcc version 4.1.2 200611= 15 (prerelease) (SUSE Linux)) #1 SMP PREEMPT Tue Aug 14 15:27:26 CEST 200= 7 +<5>Linux version 2.6.23-rc3-mm1-testing (ts@xenon) (gcc version 4.1.2 20= 061115 (prerelease) (SUSE Linux)) #1 SMP PREEMPT Thu Aug 23 00:02:51 CEST= 2007 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000008f000 (usable) <4> BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) @@ -25,6 +25,7 @@ <5>896MB LOWMEM available. <6>found SMP MP-table at 000fe200 <7>Entering add_active_range(0, 0, 255744) 0 entries of 256 used +<7>sizeof(struct page) =3D 56 <4>Zone PFN ranges: <4> DMA 0 -> 4096 <4> Normal 4096 -> 229376 @@ -33,6 +34,7 @@ <4>early_node_map[1] active PFN ranges <4> 0: 0 -> 255744 <7>On node 0 totalpages: 255744 +<7>Node 0 memmap at 0xc1000000 size 14336000 first pfn 0xc1000000 <7> DMA zone: 56 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 4040 pages, LIFO batch:0 @@ -82,16 +84,16 @@ <4>swsusp: Registered nosave memory region: 000000000008f000 - 000000000= 00a0000 <4>swsusp: Registered nosave memory region: 00000000000a0000 - 000000000= 00e0000 <4>swsusp: Registered nosave memory region: 00000000000e0000 - 000000000= 0100000 -<4>Built 1 zonelists in Zone order. Total pages: 252248 +<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: = 252248 <5>Kernel command line: root=3D/dev/system/root video=3Dmatroxfb:vesa:0x= 31b resume=3D/dev/system/swap splash=3Dverbose <7>mapped APIC to ffffb000 (fee00000) <7>mapped IOAPIC to ffffa000 (fec00000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 -<4>CPU 0 irqstacks, hard=3Dc0451000 soft=3Dc0449000 +<4>CPU 0 irqstacks, hard=3Dc04d0000 soft=3Dc04c8000 <4>PID hash table entries: 4096 (order: 12, 16384 bytes) -<4>Detected 3197.068 MHz processor. +<4>Detected 3196.982 MHz processor. <4>Console: colour VGA+ 80x25 <6>console [tty0] enabled <4>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Mol= nar @@ -188,21 +190,21 @@ <4>--------------------------------- <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -<6>Memory: 993044k/1022976k available (2040k kernel code, 28100k reserve= d, 1042k data, 252k init, 104484k highmem) +<6>Memory: 992396k/1022976k available (2110k kernel code, 28776k reserve= d, 1467k data, 260k init, 104484k highmem) <4>virtual kernel memory layout: <4> fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) <4> pkmap : 0xff800000 - 0xffc00000 (4096 kB) <4> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) <4> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) -<4> .init : 0xc0407000 - 0xc0446000 ( 252 kB) -<4> .data : 0xc02fe179 - 0xc0402ce4 (1042 kB) -<4> .text : 0xc0100000 - 0xc02fe179 (2040 kB) +<4> .init : 0xc0483000 - 0xc04c4000 ( 260 kB) +<4> .data : 0xc030f81f - 0xc047e4c4 (1467 kB) +<4> .text : 0xc0100000 - 0xc030f81f (2110 kB) <4>Checking if this processor honours the WP bit even in supervisor mode= =2E.. Ok. -<6>SLUB: Genslabs=3D22, HWalign=3D64, Order=3D0-1, MinObjects=3D4, CPUs=3D= 2, Nodes=3D1 -<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 -<6>hpet0: 3 64-bit timers, 14318180 Hz -<4>Calibrating delay using timer specific routine.. 6399.65 BogoMIPS (lp= j=3D3199825) -<6>Security Framework v1.0.0 initialized +<6>SLUB: Genslabs=3D11, HWalign=3D64, Order=3D0-3, MinObjects=3D16, CPUs= =3D2, Nodes=3D1 +<4>Calibrating delay using timer specific routine.. 6399.03 BogoMIPS (lp= j=3D3199517) +<6>kswapd reclaim order set to 3 +<6>Security Framework initialized +<6>Capability LSM initialized <4>Mount-cache hash table entries: 512 <7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 0000000= 0 0000e4bd 00000000 00000001 00000000 <4>monitor/mwait feature present. @@ -223,9 +225,9 @@ <4>CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04 <4>lockdep: not fixing up alternatives. <4>Booting processor 1/1 eip 3000 -<4>CPU 1 irqstacks, hard=3Dc0452000 soft=3Dc044a000 +<4>CPU 1 irqstacks, hard=3Dc04d1000 soft=3Dc04c9000 <6>Initializing CPU#1 -<4>Calibrating delay using timer specific routine.. 6393.68 BogoMIPS (lp= j=3D3196844) +<4>Calibrating delay using timer specific routine.. 6392.76 BogoMIPS (lp= j=3D3196383) <7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 0000000= 0 0000e4bd 00000000 00000001 00000000 <4>monitor/mwait feature present. <6>CPU: Trace cache: 12K uops, L1 D cache: 16K @@ -238,23 +240,27 @@ <6>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available <6>CPU1: Thermal monitoring enabled <4>CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04 -<6>Total of 2 processors activated (12793.33 BogoMIPS). +<6>Total of 2 processors activated (12791.80 BogoMIPS). <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 -<6>checking TSC synchronization [CPU#0 -> CPU#1]: passed. +<6>checking TSC synchronization [CPU#0 -> CPU#1]: +<4>Measured 32 cycles TSC warp between CPUs, turning off TSC clock. +<4>Marking TSC unstable due to: check_tsc_sync_source failed. <6>Brought up 2 CPUs <6>Booting paravirtualized kernel on bare hardware <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered -<3>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved -<3>PCI: Not using MMCONFIG. <6>PCI: Using configuration type 1 <4>Setting up standard PCI resources <7>ACPI: EC: Look up EC in DSDT <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S3) <6>ACPI: Using IOAPIC for interrupt routing +<5>PCI: MCFG configuration 0: base 4026531840 segment 0 buses 0 - 127 +<5>PCI: MCFG area at f0000000 reserved in ACPI motherboard resources +<6>PCI: Using MMCONFIG <6>ACPI: PCI Root Bridge [PCI0] (0000:00) +<7>PCI: Probing PCI hardware (bus 00) <4>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO <4>PCI quirk: region 0500-053f claimed by ICH6 GPIO <6>PCI: Transparent bridge - 0000:00:1e.0 @@ -285,7 +291,9 @@ <6>NetLabel: protocols =3D UNLABELED CIPSOv4 <6>NetLabel: unlabeled traffic allowed by default <4>ACPI: RTC can wake from S4 -<6>Time: tsc clocksource has been installed. +<6>Time: hpet clocksource has been installed. +<6>Switched to high resolution mode on CPU 0 +<6>Switched to high resolution mode on CPU 1 <6>pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved <6>pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved <6>pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved @@ -340,15 +348,11 @@ <6>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) <6>TCP: Hash tables configured (established 65536 bind 65536) <6>TCP reno registered -<6>checking if image is initramfs...<6>Switched to high resolution mode = on CPU 1 -<6>Switched to high resolution mode on CPU 0 -<4> it is -<6>Freeing initrd memory: 7369k freed +<6>checking if image is initramfs... it is +<6>Freeing initrd memory: 7423k freed <6>Machine check exception polling timer started. -<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) -<5>apm: disabled - APM is not SMP safe. <6>audit: initializing netlink socket (disabled) -<5>audit(1187997798.852:1): initialized +<5>audit(2418234223.871:1): initialized <4>highmem bounce pool size: 64 pages <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 @@ -363,22 +367,27 @@ <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:1c.0:pcie00] <7>Allocate Port Service[0000:00:1c.0:pcie02] +<7>Allocate Port Service[0000:00:1c.0:pcie03] <7>PCI: Setting latency timer of device 0000:00:1c.1 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:1c.1:pcie00] <7>Allocate Port Service[0000:00:1c.1:pcie02] +<7>Allocate Port Service[0000:00:1c.1:pcie03] <7>PCI: Setting latency timer of device 0000:00:1c.2 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:1c.2:pcie00] <7>Allocate Port Service[0000:00:1c.2:pcie02] +<7>Allocate Port Service[0000:00:1c.2:pcie03] <7>PCI: Setting latency timer of device 0000:00:1c.3 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:1c.3:pcie00] <7>Allocate Port Service[0000:00:1c.3:pcie02] +<7>Allocate Port Service[0000:00:1c.3:pcie03] <7>PCI: Setting latency timer of device 0000:00:1c.4 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:1c.4:pcie00] <7>Allocate Port Service[0000:00:1c.4:pcie02] +<7>Allocate Port Service[0000:00:1c.4:pcie03] <6>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19 <6>matroxfb: Matrox G550 detected <6>PInS memtype =3D 5 @@ -390,7 +399,7 @@ <4>fb0: MATROX frame buffer device <6>matroxfb_crtc2: secondary head of fb0 was registered as fb1 <6>Real Time Clock Driver v1.12ac -<7>hpet_resources: 0xfed00000 is busy +<4>hpet_acpi_add: no address or irqs in _CRS <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enab= led <6>serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A <6>00:0a: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A @@ -407,18 +416,15 @@ <4>PNP: PS/2 appears to have AUX port disabled, if this is incorrect ple= ase boot with i8042.nopnp <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>mice: PS/2 mouse device common for all mice -<6>input: AT Translated Set 2 keyboard as /class/input/input0 -<6>input: PC Speaker as /class/input/input1 +<6>input: PC Speaker as /class/input/input0 <6>NET: Registered protocol family 1 <6>Starting balanced_irq <4>Using IPI No-Shortcut mode -<6>Freeing unused kernel memory: 252k freed -<4>Write protecting the kernel read-only data: 814k +<6>Freeing unused kernel memory: 260k freed +<4>Write protecting the kernel read-only data: 1215k +<6>input: AT Translated Set 2 keyboard as /class/input/input1 <5>SCSI subsystem initialized -<6>ACPI: Processor [CPU0] (supports 8 throttling states) -<6>ACPI: Processor [CPU1] (supports 8 throttling states) -<4>ACPI Exception (processor_core-0790): AE_NOT_FOUND, Processor Device = is not present [20070126] -<4>ACPI Exception (processor_core-0790): AE_NOT_FOUND, Processor Device = is not present [20070126] +<4>thermal: Unknown symbol acpi_processor_set_thermal_limit <7>libata version 2.21 loaded. <7>ahci 0000:00:1f.2: version 2.3 <6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 @@ -431,12 +437,12 @@ <6>scsi3 : ahci <6>scsi4 : ahci <6>scsi5 : ahci -<6>ata1: SATA max UDMA/133 cmd 0xf887c100 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 -<6>ata2: SATA max UDMA/133 cmd 0xf887c180 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 -<6>ata3: SATA max UDMA/133 cmd 0xf887c200 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 -<6>ata4: SATA max UDMA/133 cmd 0xf887c280 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 -<6>ata5: SATA max UDMA/133 cmd 0xf887c300 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 -<6>ata6: SATA max UDMA/133 cmd 0xf887c380 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 +<6>ata1: SATA max UDMA/133 cmd 0xf883c100 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 +<6>ata2: SATA max UDMA/133 cmd 0xf883c180 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 +<6>ata3: SATA max UDMA/133 cmd 0xf883c200 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 +<6>ata4: SATA max UDMA/133 cmd 0xf883c280 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 +<6>ata5: SATA max UDMA/133 cmd 0xf883c300 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 +<6>ata6: SATA max UDMA/133 cmd 0xf883c380 ctl 0x00000000 bmdma 0x0000000= 0 irq 218 <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <6>ata1.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133 <6>ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) @@ -465,12 +471,12 @@ <5>sd 1:0:0:0: [sdb] Write Protect is off <7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't = support DPO or FUA +<5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) <5>sd 1:0:0:0: [sdb] Write Protect is off <7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't = support DPO or FUA -<6> sdb:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0 -<4> sdb1 +<6> sdb: sdb1 <5>sd 1:0:0:0: [sdb] Attached SCSI disk <5>sd 1:0:0:0: Attached scsi generic sg1 type 0 <6>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16 @@ -517,94 +523,139 @@ <5>st 8:0:12:0: Attached scsi tape st0 <6>st 8:0:12:0: st0: try direct i/o: yes (alignment 512 B) <6>Linux agpgart interface v0.102 +<6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 +<4>rtc_cmos: probe of 00:03 failed with error -16 +<6>agpgart: suspend/resume problematic: resume with 3D/DRI active may lo= ckup X.Org +<4>on some chipset/BIOS combos (see DEBUG_AGP_PM in intel-agp.c) <6>agpgart: Detected an Intel 965Q Chipset. <6>agpgart: Unknown page table size, assuming 512KB <6>agpgart: Detected 7676K stolen memory. <6>agpgart: AGP aperture is 256M @ 0x40000000 -<6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 -<4>rtc_cmos: probe of 00:03 failed with error -16 <6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 22 <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19 -<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 -<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64 -<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller -<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 -<5>firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10 -<6>ehci_hcd 0000:00:1a.7: debug port 1 -<7>PCI: cache line size of 128 is not supported by device 0000:00:1a.7 -<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0x52c25c00 -<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004= -<6>usb usb1: configuration #1 chosen from 1 choice -<6>hub 1-0:1.0: USB hub found -<6>hub 1-0:1.0: 4 ports detected <6>USB Universal Host Controller Interface driver v3.0 -<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 -<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 -<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller -<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 -<6>ehci_hcd 0000:00:1d.7: debug port 1 -<7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7 -<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x52c25800 -<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004= -<6>usb usb2: configuration #1 chosen from 1 choice -<6>hub 2-0:1.0: USB hub found -<6>hub 2-0:1.0: 6 ports detected <6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 <7>PCI: Setting latency timer of device 0000:00:1a.0 to 64 <6>uhci_hcd 0000:00:1a.0: UHCI Host Controller -<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 +<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:1a.0: irq 17, io base 0x000030c0 -<6>usb usb3: configuration #1 chosen from 1 choice -<6>hub 3-0:1.0: USB hub found -<6>hub 3-0:1.0: 2 ports detected +<6>usb usb1: configuration #1 chosen from 1 choice +<6>hub 1-0:1.0: USB hub found +<6>hub 1-0:1.0: 2 ports detected +<5>firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10 +<6>usb usb1: new device found, idVendor=3D0000, idProduct=3D0000 +<6>usb usb1: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 +<6>usb usb1: Product: UHCI Host Controller +<6>usb usb1: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd +<6>usb usb1: SerialNumber: 0000:00:1a.0 <6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 22 <7>PCI: Setting latency timer of device 0000:00:1a.1 to 64 <6>uhci_hcd 0000:00:1a.1: UHCI Host Controller -<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 +<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1a.1: irq 22, io base 0x000030a0 -<6>usb usb4: configuration #1 chosen from 1 choice -<6>hub 4-0:1.0: USB hub found -<6>hub 4-0:1.0: 2 ports detected -<5>firewire_core: created new fw device fw0 (0 config rom retries, S400)= +<6>usb usb2: configuration #1 chosen from 1 choice +<6>hub 2-0:1.0: USB hub found +<6>hub 2-0:1.0: 2 ports detected +<6>usb usb2: new device found, idVendor=3D0000, idProduct=3D0000 +<6>usb usb2: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 +<6>usb usb2: Product: UHCI Host Controller +<6>usb usb2: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd +<6>usb usb2: SerialNumber: 0000:00:1a.1 +<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 +<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64 +<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller +<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 +<6>ehci_hcd 0000:00:1a.7: debug port 1 +<7>PCI: cache line size of 128 is not supported by device 0000:00:1a.7 +<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0x52c25c00 +<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004= +<6>usb usb3: configuration #1 chosen from 1 choice +<6>hub 3-0:1.0: USB hub found +<6>hub 3-0:1.0: 4 ports detected +<6>usb usb3: new device found, idVendor=3D0000, idProduct=3D0000 +<6>usb usb3: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 +<6>usb usb3: Product: EHCI Host Controller +<6>usb usb3: Manufacturer: Linux 2.6.23-rc3-mm1-testing ehci_hcd +<6>usb usb3: SerialNumber: 0000:00:1a.7 <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller -<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 +<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 <6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 -<6>usb usb5: configuration #1 chosen from 1 choice -<6>hub 5-0:1.0: USB hub found -<6>hub 5-0:1.0: 2 ports detected -<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 -<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64 -<7>ALSA sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=3D1 (0xd/0= x0/0x0/0x0/0x0) -<7>ALSA sound/pci/hda/hda_codec.c:2335: speaker_outs=3D0 (0x0/0x0/0x0= /0x0/0x0) -<7>ALSA sound/pci/hda/hda_codec.c:2339: hp_outs=3D1 (0xa/0x0/0x0/0x0/= 0x0) -<7>ALSA sound/pci/hda/hda_codec.c:2347: inputs: mic=3D0xe, fmic=3D0xb= , line=3D0xf, fline=3D0x0, cd=3D0x0, aux=3D0x0 -<7>ALSA sound/pci/hda/patch_sigmatel.c:1297: dac_nids=3D3 (0x2/0x5/0x4/0= x0/0x0) +<6>usb usb4: configuration #1 chosen from 1 choice +<6>hub 4-0:1.0: USB hub found +<6>hub 4-0:1.0: 2 ports detected +<5>firewire_core: created new fw device fw0 (0 config rom retries, S400)= +<6>usb usb4: new device found, idVendor=3D0000, idProduct=3D0000 +<6>usb usb4: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 +<6>usb usb4: Product: UHCI Host Controller +<6>usb usb4: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd +<6>usb usb4: SerialNumber: 0000:00:1d.0 <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller -<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 +<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 <6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 -<6>usb usb6: configuration #1 chosen from 1 choice -<6>hub 6-0:1.0: USB hub found -<6>hub 6-0:1.0: 2 ports detected +<6>usb usb5: configuration #1 chosen from 1 choice +<6>hub 5-0:1.0: USB hub found +<6>hub 5-0:1.0: 2 ports detected +<6>usb usb5: new device found, idVendor=3D0000, idProduct=3D0000 +<6>usb usb5: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 +<6>usb usb5: Product: UHCI Host Controller +<6>usb usb5: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd +<6>usb usb5: SerialNumber: 0000:00:1d.1 <6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller -<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 +<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 <6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 +<6>usb usb6: configuration #1 chosen from 1 choice +<6>hub 6-0:1.0: USB hub found +<6>hub 6-0:1.0: 2 ports detected +<6>usb usb6: new device found, idVendor=3D0000, idProduct=3D0000 +<6>usb usb6: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 +<6>usb usb6: Product: UHCI Host Controller +<6>usb usb6: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd +<6>usb usb6: SerialNumber: 0000:00:1d.2 +<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 +<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 +<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller +<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 +<6>ehci_hcd 0000:00:1d.7: debug port 1 +<7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7 +<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x52c25800 +<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004= +<6>usb 5-2: new low speed USB device using uhci_hcd and address 2 <6>usb usb7: configuration #1 chosen from 1 choice <6>hub 7-0:1.0: USB hub found -<6>hub 7-0:1.0: 2 ports detected -<6>usb 6-2: new low speed USB device using uhci_hcd and address 2 -<6>usb 6-2: configuration #1 chosen from 1 choice +<6>hub 7-0:1.0: 6 ports detected +<6>usb usb7: new device found, idVendor=3D0000, idProduct=3D0000 +<6>usb usb7: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 +<6>usb usb7: Product: EHCI Host Controller +<6>usb usb7: Manufacturer: Linux 2.6.23-rc3-mm1-testing ehci_hcd +<6>usb usb7: SerialNumber: 0000:00:1d.7 +<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 +<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64 +<7>ALSA sound/pci/hda/hda_codec.c:2735: autoconfig: line_outs=3D1 (0xd/0= x0/0x0/0x0/0x0) +<7>ALSA sound/pci/hda/hda_codec.c:2739: speaker_outs=3D0 (0x0/0x0/0x0= /0x0/0x0) +<7>ALSA sound/pci/hda/hda_codec.c:2743: hp_outs=3D1 (0xa/0x0/0x0/0x0/= 0x0) +<7>ALSA sound/pci/hda/hda_codec.c:2751: inputs: mic=3D0xe, fmic=3D0xb= , line=3D0xf, fline=3D0x0, cd=3D0x0, aux=3D0x0 +<7>ALSA sound/pci/hda/patch_sigmatel.c:1344: dac_nids=3D3 (0x2/0x5/0x4/0= x0/0x0) <6>Adding 2097144k swap on /dev/system/swap. Priority:-1 extents:1 acro= ss:2097144k -<6>usb 7-1: new full speed USB device using uhci_hcd and address 2 -<6>usb 7-1: configuration #1 chosen from 1 choice +<6>usb 5-2: new low speed USB device using uhci_hcd and address 3 +<6>usb 5-2: configuration #1 chosen from 1 choice +<6>usb 5-2: new device found, idVendor=3D413c, idProduct=3D3010 +<6>usb 5-2: new device strings: Mfr=3D0, Product=3D0, SerialNumber=3D0 +<6>usb 6-1: new full speed USB device using uhci_hcd and address 2 +<6>usb 6-1: configuration #1 chosen from 1 choice +<6>usb 6-1: new device found, idVendor=3D0681, idProduct=3D0002 +<6>usb 6-1: new device strings: Mfr=3D1, Product=3D2, SerialNumber=3D3 +<6>usb 6-1: Product: Sinus 45 AB isdn +<6>usb 6-1: Manufacturer: Siemens AG +<6>usb 6-1: SerialNumber: 002F970BE0 <6>usbcore: registered new interface driver hiddev <6>input: HID 413c:3010 as /class/input/input2 <6>input: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1d.1-2 @@ -617,9 +668,10 @@ <7>gigaset: Register driver capabilities to LL <7>bas_gigaset: gigaset_probe: Check if device matches .. (Vendor: 0x681= , Product: 0x2) <7>bas_gigaset: gigaset_probe: wrong alternate setting 0 - trying to swi= tch -<6>usb 7-1: gigaset_probe: Device matched (Vendor: 0x681, Product: 0x2) +<6>usb 6-1: gigaset_probe: Device matched (Vendor: 0x681, Product: 0x2) <7>bas_gigaset: -------> 0x34 (0) <7>gigaset: scheduling START +<7>bas_gigaset: <-------3: 0x11 (0 [0x00 0x00]) <7>gigaset: connection state 0, event -110 <7>gigaset: unblocking all channels <7>gigaset: blocking all channels @@ -630,7 +682,6 @@ <7>gigaset: connection state 0, event -27 <6>usbcore: registered new interface driver bas_gigaset <6>bas_gigaset: Tilman Schmidt , Hansjoerg Lipp , Stefan Eilers -<7>bas_gigaset: <-------3: 0x11 (0 [0x00 0x00]) <6>bas_gigaset: USB Driver for Gigaset 307x <7>bas_gigaset: <-------3: 0x11 (0 [0x00 0x00]) <7>gigaset: scheduling timeout --------------060401020703050807050402-- --------------enig409D29879952063DD3D04F5F Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3rc1 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGz3xHMdB4Whm86/kRAs14AJ4iVE47mv0nTYg7Ly9GIKKCwdH3CgCfRSoX NXrxmAG8jRxyhbFw3aJKhAc= =+229 -----END PGP SIGNATURE----- --------------enig409D29879952063DD3D04F5F-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/