Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759982AbXHYDa3 (ORCPT ); Fri, 24 Aug 2007 23:30:29 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752288AbXHYDaT (ORCPT ); Fri, 24 Aug 2007 23:30:19 -0400 Received: from relaymail.wedohosting.com ([64.141.0.84]:40312 "HELO relaymail.wedohosting.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1751675AbXHYDaR (ORCPT ); Fri, 24 Aug 2007 23:30:17 -0400 X-Greylist: delayed 440 seconds by postgrey-1.27 at vger.kernel.org; Fri, 24 Aug 2007 23:30:17 EDT Message-ID: <46CFA08E.6090604@arbores.ca> Date: Fri, 24 Aug 2007 20:22:54 -0700 From: Bryan Woods Reply-To: bryan@arbores.ca Organization: Arbores Infosystems Inc. User-Agent: Thunderbird 2.0.0.6 (Windows/20070728) MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: Stardom SATA HSM violation Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2133 Lines: 65 Hi KML I am installing gentoo 2007.0 (kernel 2.6.19) on a dual AMD Opteron server (total of 4 cores). The hard disk is a Stardom 2611-2S-S1 device: actually two 250GB drives in a RAID0 config managed by the device itself - it should appear to the kernel as one SATA drive. If it matters, the underlying HDs are "Seagate Barracuda 7200 10"s. Here's the device: http://www.synetic.net/Synetic-Products/Stardoms/SR-2611-SA/Stardom-2611.htm During the install and at different points in the process I get an "HSM violation" and the system becomes unresponsive. It looks like a similar situation to: http://lkml.org/lkml/2007/6/6/195 Will more recent kernels work with this hardware (should I keep it and try the install again) or should I switch hardware to something more compatible (like an Adaptec card)? Thanks! Bryan -- console output: tag 0 cmd 0x39 Emask 0x2 stat 0x58 err 0x0 (HSM violation) exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen -- Output from hdparm -I /dev/sda: /dev/sda: ATA device, with non-removable media Model Number: STARDOM V.36.A0B Serial Number: Firmware Revision: V.36.A0B Standards: Used: ATA/ATAPI-6 T13 1410D revision 0 [snip] Commands/features: Enabled Supported: * SMART feature set * Power Management feature set * Advanced Power Management feature set * 48-bit Address feature set * Mandatory FLUSH_CACHE * SATA-I signaling speed (1.5 Gb/s) * SATA-II signaling speed (3.0 Gb/s) -- Parts of dmesg: libata version 2.00 loaded sata_nv 0000:00:05.0: version 2.0 ata1: SATA max UDMA/133 cmd 0xD480 ctl 0xD402 bmdma 0xCC00 irq 21 ata2: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xCC08 irq 21 scsi0 : sata_nv ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6, max UDMA/133,976794112 sectors: LBA48 ata1.00: ata1: dev 0 multi count 1 ata1.00: applying bridge limits ata1.00: configured for UDMA/100 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/