Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <9821623b-fcca-2a3a-1cd6-9e95c480b1a4@linaro.org>
Date:   Fri, 20 Jan 2023 19:58:31 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.6.1
Subject: Re: [PATCH] ARM: dts: qcom: apq8060-dragonboard: align MPP pin node
 names with DT schema
Content-Language: en-US
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20230120174036.351937-1-krzysztof.kozlowski@linaro.org>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20230120174036.351937-1-krzysztof.kozlowski@linaro.org>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 20.01.2023 18:40, Krzysztof Kozlowski wrote:
> DT schema expects nodes ending with "pins:
> 
>   qcom-apq8060-dragonboard.dtb: mpps@50: cm3605-mpps-state: 'oneOf' conditional failed, one must be fixed:
>     'mpp5' does not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> 
> Warning visible after:
> https://lore.kernel.org/r/20230120165103.1278852-1-robh@kernel.org
> ---
>  arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 16 +++++++---------
>  1 file changed, 7 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> index 7a4c59e04af6..8e4b61e4d4b1 100644
> --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> @@ -435,15 +435,13 @@ &pm8058_led133 {
>  
>  &pm8058_mpps {
>  	dragon_cm3605_mpps: cm3605-mpps-state {
> -		mpp5 {
> -			pins = "mpp5";
> -			function = "analog";
> -			input-enable;
> -			bias-high-impedance;
> -			/* Let's use channel 5 */
> -			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
> -			power-source = <PM8058_GPIO_S3>;
> -		};
> +		pins = "mpp5";
> +		function = "analog";
> +		input-enable;
> +		bias-high-impedance;
> +		/* Let's use channel 5 */
> +		qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
> +		power-source = <PM8058_GPIO_S3>;
>  	};
>  };
>