Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754111AbXHZXK1 (ORCPT ); Sun, 26 Aug 2007 19:10:27 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752900AbXHZXKP (ORCPT ); Sun, 26 Aug 2007 19:10:15 -0400 Received: from wa-out-1112.google.com ([209.85.146.177]:41813 "EHLO wa-out-1112.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752793AbXHZXKN (ORCPT ); Sun, 26 Aug 2007 19:10:13 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=PH+WmPagmCo/EjDl/jwRhCoQuau5b165wPAmOBOth28/WnIjgf5nazL1YImn8ss7va50r+zFW3FwR8mxORuZlOGE8r3b3ifSKBxxmvOc1hSlg9ABTCeC2ydl6sH9iAgvEuTm/YukpJkuwFRhVIxaqUU3EHF4qp+BDI1gkKQ9KWE= Message-ID: <6bffcb0e0708261610g10d9c59ck5789fac6feca9f42@mail.gmail.com> Date: Mon, 27 Aug 2007 01:10:13 +0200 From: "Michal Piotrowski" To: bryan@arbores.ca Subject: Re: Stardom SATA HSM violation Cc: linux-kernel@vger.kernel.org, "IDE/ATA development list" In-Reply-To: <46CFA08E.6090604@arbores.ca> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <46CFA08E.6090604@arbores.ca> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2510 Lines: 75 Hi, [Adding linux-ide to CC] On 25/08/07, Bryan Woods wrote: > Hi KML > > I am installing gentoo 2007.0 (kernel 2.6.19) on a dual AMD Opteron server (total of 4 cores). The hard disk is a Stardom 2611-2S-S1 device: actually two 250GB drives in a RAID0 config managed by the device itself - it should appear to the kernel as one SATA drive. If it matters, the underlying HDs are "Seagate Barracuda 7200 10"s. Here's the device: > > http://www.synetic.net/Synetic-Products/Stardoms/SR-2611-SA/Stardom-2611.htm > > During the install and at different points in the process I get an "HSM violation" and the system becomes unresponsive. It looks like a similar situation to: > > http://lkml.org/lkml/2007/6/6/195 > > Will more recent kernels work with this hardware (should I keep it and try the install again) or should I switch hardware to something more compatible (like an Adaptec card)? > > Thanks! > Bryan > > -- > console output: > > tag 0 cmd 0x39 Emask 0x2 stat 0x58 err 0x0 (HSM violation) > exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > -- > Output from hdparm -I /dev/sda: > > /dev/sda: > > ATA device, with non-removable media > Model Number: STARDOM V.36.A0B > Serial Number: > Firmware Revision: V.36.A0B > Standards: > Used: ATA/ATAPI-6 T13 1410D revision 0 > > [snip] > > Commands/features: > Enabled Supported: > * SMART feature set > * Power Management feature set > * Advanced Power Management feature set > * 48-bit Address feature set > * Mandatory FLUSH_CACHE > * SATA-I signaling speed (1.5 Gb/s) > * SATA-II signaling speed (3.0 Gb/s) > > -- > Parts of dmesg: > libata version 2.00 loaded > sata_nv 0000:00:05.0: version 2.0 > ata1: SATA max UDMA/133 cmd 0xD480 ctl 0xD402 bmdma 0xCC00 irq 21 > ata2: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xCC08 irq 21 > scsi0 : sata_nv > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ATA-6, max UDMA/133,976794112 sectors: LBA48 > ata1.00: ata1: dev 0 multi count 1 > ata1.00: applying bridge limits > ata1.00: configured for UDMA/100 > Regards, Michal -- LOG http://www.stardust.webpages.pl/log/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/