From:   Christian Hewitt <christianshewitt@gmail.com>
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Neil Armstrong <neil.armstrong@linaro.org>,
        Kevin Hilman <khilman@baylibre.com>,
        Jerome Brunet <jbrunet@baylibre.com>,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH 3/3] arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
Date:   Mon, 23 Jan 2023 06:55:04 +0000
Message-Id: <20230123065504.2669769-4-christianshewitt@gmail.com>
In-Reply-To: <20230123065504.2669769-1-christianshewitt@gmail.com>
References: <20230123065504.2669769-1-christianshewitt@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The Broadcom WiFi/BT SDIO nodes are now inherited from the P212 common dtsi
so we can remove them from the VIM1 board dts.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 .../dts/amlogic/meson-gxl-s905x-khadas-vim.dts    | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index bee51e29015b..2f88f78de5b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -220,21 +220,6 @@ &pwm_ef {
 
 &sd_emmc_a {
 	max-frequency = <100000000>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&uart_A {
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-		clocks = <&wifi32k>;
-		clock-names = "lpo";
-	};
 };
 
 /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
-- 
2.34.1