From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>
To:     thierry.reding@gmail.com
Cc:     u.kleine-koenig@pengutronix.de, matthias.bgg@gmail.com,
        weiqing.kong@mediatek.com, jitao.shi@mediatek.com,
        linux-pwm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
        kernel@collabora.com,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>
Subject: [PATCH 1/2] pwm: mtk-disp: Disable shadow registers before setting backlight values
Date:   Mon, 23 Jan 2023 17:06:14 +0100
Message-Id: <20230123160615.375969-2-angelogioacchino.delregno@collabora.com>
In-Reply-To: <20230123160615.375969-1-angelogioacchino.delregno@collabora.com>
References: <20230123160615.375969-1-angelogioacchino.delregno@collabora.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

If shadow registers usage is not desired, disable that before performing
any write to CON0/1 registers in the .apply() callback, otherwise we may
lose clkdiv or period/width updates.

Fixes: cd4b45ac449a ("pwm: Add MediaTek MT2701 display PWM driver support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/pwm/pwm-mtk-disp.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 692a06121b28..82b430d881a2 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -138,6 +138,19 @@ static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	high_width = mul_u64_u64_div_u64(state->duty_cycle, rate, div);
 	value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
 
+	if (mdp->data->bls_debug && !mdp->data->has_commit) {
+		/*
+		 * For MT2701, disable double buffer before writing register
+		 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+		 */
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+					 mdp->data->con0_sel,
+					 mdp->data->con0_sel);
+	}
+
 	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
 				 PWM_CLKDIV_MASK,
 				 clk_div << PWM_CLKDIV_SHIFT);
@@ -152,17 +165,6 @@ static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
 					 mdp->data->commit_mask,
 					 0x0);
-	} else {
-		/*
-		 * For MT2701, disable double buffer before writing register
-		 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
-		 */
-		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
-					 mdp->data->bls_debug_mask,
-					 mdp->data->bls_debug_mask);
-		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
-					 mdp->data->con0_sel,
-					 mdp->data->con0_sel);
 	}
 
 	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
-- 
2.39.0