From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
        Vinod Koul <vkoul@kernel.org>,
        Neil Armstrong <neil.armstrong@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v3 3/4] arm64: dts: qcom: sm8450: drop incorrect cells from serial
Date:   Tue, 24 Jan 2023 09:49:50 +0100
Message-Id: <20230124084951.38195-3-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230124084951.38195-1-krzysztof.kozlowski@linaro.org>
References: <20230124084951.38195-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.

Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

---

Changes since v2:
1. Add tag
2. Correct typo in commit msg

Changes since v1:
1. None
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 5ba65780166e..873bc9c412f2 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1007,8 +1007,6 @@ uart20: serial@894000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart20_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -1401,8 +1399,6 @@ uart7: serial@99c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 		};
-- 
2.34.1