From:   devi priya <quic_devipriy@quicinc.com>
To:     <agross@kernel.org>, <andersson@kernel.org>,
        <konrad.dybcio@linaro.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <mturquette@baylibre.com>,
        <sboyd@kernel.org>, <ulf.hansson@linaro.org>,
        <linus.walleij@linaro.org>, <catalin.marinas@arm.com>,
        <will@kernel.org>, <p.zabel@pengutronix.de>, <shawnguo@kernel.org>,
        <arnd@arndb.de>, <marcel.ziswiler@toradex.com>,
        <dmitry.baryshkov@linaro.org>, <nfraprado@collabora.com>,
        <broonie@kernel.org>, <tdas@codeaurora.org>,
        <bhupesh.sharma@linaro.org>, <linux-arm-msm@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-clk@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
        <linux-gpio@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>
CC:     <quic_srichara@quicinc.com>, <quic_gokulsri@quicinc.com>,
        <quic_sjaganat@quicinc.com>, <quic_kathirav@quicinc.com>,
        <quic_arajkuma@quicinc.com>, <quic_anusha@quicinc.com>,
        <quic_poovendh@quicinc.com>
Subject: [PATCH V1 3/8] dt-bindings: pinctrl: qcom: Document IPQ9574 pinctrl driver
Date:   Tue, 24 Jan 2023 19:45:36 +0530
Message-ID: <20230124141541.8290-4-quic_devipriy@quicinc.com>
In-Reply-To: <20230124141541.8290-1-quic_devipriy@quicinc.com>
References: <20230124141541.8290-1-quic_devipriy@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Document the pinctrl driver for IPQ9574

Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
---
 .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml   | 135 ++++++++++++++++++
 1 file changed, 135 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
new file mode 100644
index 000000000000..d736f0fb7835
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ9574 TLMM block
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC.
+
+properties:
+  compatible:
+    const: qcom,ipq9574-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 33
+
+  gpio-line-names:
+    maxItems: 65
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq9574-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq9574-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq9574-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$"
+            - enum: [ qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, qdsd_cmd,
+                      qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3, sdc1_clk,
+                      sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 8
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+                audio_pdm0, audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart,
+                blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi,
+                blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c,
+                blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0,
+                cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy,
+                gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc,
+                mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk,
+                pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1,
+                prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21,
+                pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13,
+                pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32,
+                pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
+                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+                qdss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data,
+                rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
+                wci20, wci21, wsa_swrm ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq9574-tlmm";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 65>;
+
+        uart2-state {
+            pins = "gpio34", "gpio35";
+            function = "blsp2_uart";
+            drive-strength = <8>;
+            bias-pull-down;
+        };
+    };
-- 
2.17.1