Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id BAC8AC27C76 for ; Wed, 25 Jan 2023 23:40:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235466AbjAYXkM (ORCPT ); Wed, 25 Jan 2023 18:40:12 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42148 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229688AbjAYXkK (ORCPT ); Wed, 25 Jan 2023 18:40:10 -0500 Received: from mail-ej1-x633.google.com (mail-ej1-x633.google.com [IPv6:2a00:1450:4864:20::633]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4E97A113FB for ; Wed, 25 Jan 2023 15:39:47 -0800 (PST) Received: by mail-ej1-x633.google.com with SMTP id qx13so764622ejb.13 for ; Wed, 25 Jan 2023 15:39:47 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:in-reply-to:from:references:cc:to :content-language:subject:user-agent:mime-version:date:message-id :from:to:cc:subject:date:message-id:reply-to; bh=I1eo6u8u6j/dLDuvCvpQ+3N0e/ORUlXV7mdDWjw03Lg=; b=N/tWfsNeknZomdKOU9HLhxA8oRlPdJWGmlGv5r2bcUj0P6CR6AIYGfcn7b9xjGL4zB V2tW9HEAiFmevxGZi3GOynwR6ErZ2j/4dnX/eJKoOj9TTHuoz2fJS6dS+IE1PtBNE+Mg 2VBihrDdciPrzaUih8nQzCRxxWcQo3AgyI2v1sKx8rzsPuTg51tPvuX+V6K6KEA0D9Q6 YfGJwX4K1IpB/BDLMGZGguO+GpExg0Deqnf8N6lm1x+Y4d6kZBxqq50F+rCdZg/LkZyL 4JMvoVYXflimGMGrWLD19iaoP0h4q49TW1Y3zaM9prnAkd3cXzXpZfwEd+tu9WhgyGX8 hPcQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:in-reply-to:from:references:cc:to :content-language:subject:user-agent:mime-version:date:message-id :x-gm-message-state:from:to:cc:subject:date:message-id:reply-to; bh=I1eo6u8u6j/dLDuvCvpQ+3N0e/ORUlXV7mdDWjw03Lg=; b=S/0OR8bUV/JDgIoUpAbUvMRVpY6zdtnLvp9YNjQThRKd2dmxy0cMV2gXHLX+SWNE2F cT451nk2INywsbc7fFHe+pxMdEfWrQqfP/fJh69qoXV/L7EH02DoDlC4FpJl2X23rKl+ LGVpFno4tZd36P2nT/7ey8VNQFUQMYunJTcnQMls4ZNtdCOoqCVl+X9ETB2qWtrC3GEN tEKtTCdvH08LgJBvop76zig94FNx00kwykwQAfjqzzZn/PVWBYrNAwAzccV69RRO1sW8 yiudxZgbwZE8U+M1WQuFNkPxvTRcNC876DC5X4/u65sVAhTKXApvvNtTxTxKR5wcHIt4 oPXg== X-Gm-Message-State: AO0yUKXVvbFjDd7aCCtVLjcCgETzC0FHRK8RPserwnLXV0dXuf7VDJCs X2JR/tECoSzsEDD91lRqQoaKLg== X-Google-Smtp-Source: AK7set+Mm3YPTugb3SE+fm9lKzLZkdO5E4XLOqZWGWQoIMvtzufGGhk+IzGa92VGnPTONXMktQsZCA== X-Received: by 2002:a17:907:205a:b0:878:4e5a:18b8 with SMTP id pg26-20020a170907205a00b008784e5a18b8mr1604600ejb.66.1674689983915; Wed, 25 Jan 2023 15:39:43 -0800 (PST) Received: from [192.168.1.101] (abyk108.neoplus.adsl.tpnet.pl. [83.9.30.108]) by smtp.gmail.com with ESMTPSA id n21-20020a170906689500b008720c458bd4sm3045408ejr.3.2023.01.25.15.39.42 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Wed, 25 Jan 2023 15:39:43 -0800 (PST) Message-ID: <2b3c7566-0a61-55e7-790c-43466d528206@linaro.org> Date: Thu, 26 Jan 2023 00:39:41 +0100 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.7.0 Subject: Re: [PATCH v2 2/2] arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro Content-Language: en-US To: Jianhua Lu , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Kees Cook , Tony Luck , "Guilherme G . Piccoli" Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org References: <20230125112903.10710-1-lujianhua000@gmail.com> <20230125112903.10710-2-lujianhua000@gmail.com> From: Konrad Dybcio In-Reply-To: <20230125112903.10710-2-lujianhua000@gmail.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 25.01.2023 12:29, Jianhua Lu wrote: > Add support for Xiaomi Mi Pad 5 Pro, codename is xiaomi-elish. > > This commit brings support for: > * ADSP/CDSP/SLPI/VENUS > * Backlight > * Battery fuel gauge > * Framebuffer > * PCIe0 > * USB2.0 > > Note backlight driver (ktz8866) is waitting for upstreaming[1]. > [1] https://lore.kernel.org/linux-leds/20230120155018.15376-1-lujianhua000@gmail.com This should be placed below --- (next to where you pu Changes in v2) so that it's not included in the final commit message when Bjorn picks it up. > > Signed-off-by: Jianhua Lu > --- > Changes in v2: > - Apply Konrad's and Krzysztof's suggestion. This should generally be more verbose.. > > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sm8250-xiaomi-elish.dts | 617 ++++++++++++++++++ > 2 files changed, 618 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index b0423ca3e79f..769cee2b450f 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -184,6 +184,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts > new file mode 100644 > index 000000000000..f352b80b0ced > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts > @@ -0,0 +1,617 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022, 2023 Jianhua Lu > + */ > + > +/dts-v1/; > + > +#include > +#include > +#include "sm8250.dtsi" > +#include "pm8150.dtsi" > +#include "pm8150b.dtsi" > +#include "pm8150l.dtsi" > +#include "pm8009.dtsi" > + > +/* > + * Delete following upstream (sm8250.dtsi) reserved > + * memory mappings which are different in this device. on this device* > + */ > +/delete-node/ &xbl_aop_mem; > +/delete-node/ &slpi_mem; > +/delete-node/ &adsp_mem; > +/delete-node/ &spss_mem; > +/delete-node/ &cdsp_secure_heap; Could you please sort these alphabetically? > + > +/ { > + model = "Xiaomi Mi Pad 5 Pro"; > + compatible = "xiaomi,elish", "qcom,sm8250"; > + classis-type = "tablet"; > + > + /* required for bootloader to select correct board */ > + qcom,msm-id = ; /* SM8250 v2.1 */ > + qcom,board-id = <0x10008 0>; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer: framebuffer@9c000000 { > + compatible = "simple-framebuffer"; > + reg = <0x0 0x9c000000 0x0 0x2300000>; > + width = <1600>; > + height = <2560>; > + stride = <(1600 * 4)>; > + format = "a8r8g8b8"; > + }; > + }; > + > + battery_l: battery-l { > + compatible = "simple-battery"; > + voltage-min-design-microvolt = <3870000>; > + energy-full-design-microwatt-hours = <16600000>; > + charge-full-design-microamp-hours = <4300000>; > + }; > + > + battery_r: battery-r { > + compatible = "simple-battery"; > + voltage-min-design-microvolt = <3870000>; > + energy-full-design-microwatt-hours = <16600000>; > + charge-full-design-microamp-hours = <4300000>; > + }; > + > + bl_vddpos_5p5: bl-vddpos-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "bl_vddpos_5p5"; > + regulator-min-microvolt = <5500000>; > + regulator-max-microvolt = <5500000>; > + regulator-enable-ramp-delay = <233>; > + gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-boot-on; > + }; > + > + bl_vddneg_5p5: bl-vddneg-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "bl_vddneg_5p5"; > + regulator-min-microvolt = <5500000>; > + regulator-max-microvolt = <5500000>; > + regulator-enable-ramp-delay = <233>; > + gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-boot-on; > + }; > + > + gpio_keys: gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-name = "default"; > + pinctrl-0 = <&vol_up_n>; > + > + key-vol-up { > + label = "Volume Up"; > + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; > + linux,code = ; > + debounce-interval = <15>; > + linux,can-disable; > + gpio-key,wakeup; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + }; > + > + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ > + vreg_s6c_0p88: smpc6-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vreg_s6c_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-always-on; > + vin-supply = <&vph_pwr>; > + }; > + > + reserved-memory { > + xbl_aop_mem: memory@80700000 { Forgot about this earlier, but should be something-descriptive@ instead of memory@, so for example here: xbl_aop_mem: xbl-aop@ The rest LGTM, I think! Konrad > + reg = <0x0 0x80600000 0x0 0x260000>; > + no-map; > + }; > + > + slpi_mem: memory@88c00000 { > + reg = <0x0 0x88c00000 0x0 0x2f00000>; > + no-map; > + }; > + > + adsp_mem: memory@8bb00000 { > + reg = <0x0 0x8bb00000 0x0 0x2500000>; > + no-map; > + }; > + > + spss_mem: memory@8e000000 { > + reg = <0x0 0x8e000000 0x0 0x100000>; > + no-map; > + }; > + > + cdsp_secure_heap: memory@8e100000 { > + reg = <0x0 0x8e100000 0x0 0x4600000>; > + no-map; > + }; > + > + cont_splash_mem: memory@9c000000 { > + reg = <0x0 0x9c000000 0x0 0x2300000>; > + no-map; > + }; > + > + ramoops@b0000000 { > + compatible = "ramoops"; > + reg = <0x0 0xb0000000 0x0 0x400000>; > + record-size = <0x1000>; > + console-size = <0x200000>; > + ecc-size = <16>; > + no-map; > + }; > + }; > +}; > + > +&adsp { > + firmware-name = "qcom/sm8250/xiaomi/elish/adsp.mbn"; > + status = "okay"; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; > + vdd-l2-l10-supply = <&vreg_bob>; > + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; > + vdd-l6-l9-supply = <&vreg_s8c_1p35>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; > + vdd-l13-l16-l17-supply = <&vreg_bob>; > + > + /* (S1+S2+S3) - cx.lvl (ARC) */ > + > + vreg_s4a_1p8: smps4 { > + regulator-name = "vreg_s4a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1920000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5a_1p9: smps5 { > + regulator-name = "vreg_s5a_1p9"; > + regulator-min-microvolt = <1900000>; > + regulator-max-microvolt = <2040000>; > + regulator-initial-mode = ; > + }; > + > + vreg_s6a_0p95: smps6 { > + regulator-name = "vreg_s6a_0p95"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1128000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l2a_3p1: ldo2 { > + regulator-name = "vreg_l2a_3p1"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l3a_0p9: ldo3 { > + regulator-name = "vreg_l3a_0p9"; > + regulator-min-microvolt = <928000>; > + regulator-max-microvolt = <932000>; > + regulator-initial-mode = ; > + }; > + > + /* L4 - lmx.lvl (ARC) */ > + > + vreg_l5a_0p88: ldo5 { > + regulator-name = "vreg_l5a_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l6a_1p2: ldo6 { > + regulator-name = "vreg_l6a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L7 is unused. */ > + > + vreg_l9a_1p2: ldo9 { > + regulator-name = "vreg_l9a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = ; > + }; > + > + /* L10 is unused, L11 - lcx.lvl (ARC) */ > + > + vreg_l12a_1p8: ldo12 { > + regulator-name = "vreg_l12a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = ; > + }; > + > + /* L13 is unused. */ > + > + vreg_l14a_1p88: ldo14 { > + regulator-name = "vreg_l14a_1p88"; > + regulator-min-microvolt = <1880000>; > + regulator-max-microvolt = <1880000>; > + regulator-initial-mode = ; > + }; > + > + /* L15 & L16 are unused. */ > + > + vreg_l17a_3p0: ldo17 { > + regulator-name = "vreg_l17a_3p0"; > + regulator-min-microvolt = <2496000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l18a_0p9: ldo18 { > + regulator-name = "vreg_l18a_0p9"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = ; > + }; > + }; > + > + /* > + * Remaining regulators that are not yet supported: > + * OLEDB: 4925000-8100000 > + * ab: 4600000-6100000 > + * ibb: 800000-5400000 > + */ > + regulators-1 { > + compatible = "qcom,pm8150l-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-l1-l8-supply = <&vreg_s4a_1p8>; > + vdd-l2-l3-supply = <&vreg_s8c_1p35>; > + vdd-l4-l5-l6-supply = <&vreg_bob>; > + vdd-l7-l11-supply = <&vreg_bob>; > + vdd-l9-l10-supply = <&vreg_bob>; > + vdd-bob-supply = <&vph_pwr>; > + > + vreg_bob: bob { > + regulator-name = "vreg_bob"; > + regulator-min-microvolt = <3350000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = ; > + }; > + > + /* > + * S1-S6 are ARCs: > + * (S1+S2) - gfx.lvl, > + * S3 - mx.lvl, > + * (S4+S5) - mmcx.lvl, > + * S6 - ebi.lvl > + */ > + > + vreg_s7c_0p35: smps7 { > + regulator-name = "vreg_s7c_0p35"; > + regulator-min-microvolt = <348000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = ; > + }; > + > + vreg_s8c_1p35: smps8 { > + regulator-name = "vreg_s8c_1p35"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1400000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l1c_1p8: ldo1 { > + regulator-name = "vreg_l1c_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = ; > + }; > + > + /* L2-4 are unused. */ > + > + vreg_l5c_1p8: ldo5 { > + regulator-name = "vreg_l5c_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l6c_2p9: ldo6 { > + regulator-name = "vreg_l6c_2p9"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7c_2p85: ldo7 { > + regulator-name = "vreg_l7c_2p85"; > + regulator-min-microvolt = <2856000>; > + regulator-max-microvolt = <3104000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l8c_1p8: ldo8 { > + regulator-name = "vreg_l8c_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l9c_2p9: ldo9 { > + regulator-name = "vreg_l9c_2p9"; > + regulator-min-microvolt = <2704000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = ; > + regulator-allow-set-load; > + regulator-allowed-modes = + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10c_3p3: ldo10 { > + regulator-name = "vreg_l10c_3p3"; > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3296000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l11c_3p0: ldo11 { > + regulator-name = "vreg_l11c_3p0"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = ; > + }; > + }; > + > + regulators-2 { > + compatible = "qcom,pm8009-rpmh-regulators"; > + qcom,pmic-id = "f"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vreg_bob>; > + vdd-l2-supply = <&vreg_s8c_1p35>; > + vdd-l5-l6-supply = <&vreg_bob>; > + vdd-l7-supply = <&vreg_s4a_1p8>; > + > + vreg_s1f_1p2: smps1 { > + regulator-name = "vreg_s1f_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = ; > + }; > + > + vreg_s2f_0p5: smps2 { > + regulator-name = "vreg_s2f_0p5"; > + regulator-min-microvolt = <512000>; > + regulator-max-microvolt = <1100000>; > + regulator-initial-mode = ; > + }; > + > + /* L1 is unused. */ > + > + vreg_l2f_1p3: ldo2 { > + regulator-name = "vreg_l2f_1p3"; > + regulator-min-microvolt = <1304000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = ; > + }; > + > + /* L3 & L4 are unused. */ > + > + vreg_l5f_2p8: ldo5 { > + regulator-name = "vreg_l5f_2p85"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l6f_2p8: ldo6 { > + regulator-name = "vreg_l6f_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = ; > + }; > + > + vreg_l7f_1p8: ldo7 { > + regulator-name = "vreg_l7f_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = ; > + }; > + }; > +}; > + > +&cdsp { > + firmware-name = "qcom/sm8250/xiaomi/elish/cdsp.mbn"; > + status = "okay"; > +}; > + > +&gpi_dma0 { > + status = "okay"; > +}; > + > +&gpi_dma1 { > + status = "okay"; > +}; > + > +&gpi_dma2 { > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + status = "okay"; > + > + fuel-gauge@55 { > + compatible = "ti,bq27z561"; > + reg = <0x55>; > + monitored-battery = <&battery_r>; > + }; > +}; > + > +&i2c11 { > + clock-frequency = <400000>; > + status = "okay"; > + > + backlight: backlight@11 { > + compatible = "kinetic,ktz8866"; > + reg = <0x11>; > + vddpos-supply = <&bl_vddpos_5p5>; > + vddneg-supply = <&bl_vddneg_5p5>; > + enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>; > + current-num-sinks = <5>; > + kinetic,current-ramp-delay-ms = <128>; > + kinetic,led-enable-ramp-delay-ms = <1>; > + kinetic,enable-lcd-bias; > + }; > +}; > + > +&i2c13 { > + clock-frequency = <400000>; > + status = "okay"; > + > + fuel-gauge@55 { > + compatible = "ti,bq27z561"; > + reg = <0x55>; > + monitored-battery = <&battery_l>; > + }; > +}; > + > +&pcie0 { > + status = "okay"; > +}; > + > +&pcie0_phy { > + vdda-phy-supply = <&vreg_l5a_0p88>; > + vdda-pll-supply = <&vreg_l9a_1p2>; > + status = "okay"; > +}; > + > +&pm8150_gpios { > + vol_up_n: vol-up-n-state { > + pins = "gpio6"; > + function = "normal"; > + power-source = <1>; > + input-enable; > + bias-pull-up; > + }; > +}; > + > +&pon_pwrkey { > + status = "okay"; > +}; > + > +&pon_resin { > + linux,code = ; > + status = "okay"; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&qupv3_id_1 { > + status = "okay"; > +}; > + > +&qupv3_id_2 { > + status = "okay"; > +}; > + > +&slpi { > + firmware-name = "qcom/sm8250/xiaomi/elish/slpi.mbn"; > + status = "okay"; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <40 4>; > +}; > + > +&usb_1 { > + /* USB 2.0 only */ > + qcom,select-utmi-as-pipe-clk; > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "peripheral"; > + maximum-spped = "high-speed"; > + /* Remove USB3 phy */ > + phys = <&usb_1_hsphy>; > + phy-names = "usb2-phy"; > +}; > + > +&usb_1_hsphy { > + vdda-pll-supply = <&vreg_l5a_0p88>; > + vdda18-supply = <&vreg_l12a_1p8>; > + vdda33-supply = <&vreg_l2a_3p1>; > + status = "okay"; > +}; > + > +&ufs_mem_hc { > + vcc-supply = <&vreg_l17a_3p0>; > + vcc-max-microamp = <800000>; > + vccq-supply = <&vreg_l6a_1p2>; > + vccq-max-microamp = <800000>; > + vccq2-supply = <&vreg_s4a_1p8>; > + vccq2-max-microamp = <800000>; > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&vreg_l5a_0p88>; > + vdda-pll-supply = <&vreg_l9a_1p2>; > + status = "okay"; > +}; > + > +&venus { > + firmware-name = "qcom/sm8250/elish/venus.mbn"; > + status = "okay"; > +};