From:   Mikhail Zaslonko <zaslonko@linux.ibm.com>
To:     Andrew Morton <akpm@linux-foundation.org>
Cc:     LKML <linux-kernel@vger.kernel.org>,
        Heiko Carstens <hca@linux.ibm.com>,
        Vasily Gorbik <gor@linux.ibm.com>,
        Ilya Leoshkevich <iii@linux.ibm.com>,
        Mikhail Zaslonko <zaslonko@linux.ibm.com>
Subject: [PATCH 2/8] lib/zlib: Implement switching between DFLTCC and software
Date:   Thu, 26 Jan 2023 14:14:22 +0100
Message-Id: <20230126131428.1222214-3-zaslonko@linux.ibm.com>
In-Reply-To: <20230126131428.1222214-1-zaslonko@linux.ibm.com>
References: <20230126131428.1222214-1-zaslonko@linux.ibm.com>
Content-Transfer-Encoding: 8bit
MIME-Version: 1.0
Precedence: bulk

This commit is based on:
  https://github.com/zlib-ng/zlib-ng/commit/fc04275

Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
---
 lib/zlib_dfltcc/dfltcc_deflate.c | 38 ++++++++++++++++++--------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/lib/zlib_dfltcc/dfltcc_deflate.c b/lib/zlib_dfltcc/dfltcc_deflate.c
index 6c946e8532ee..dc85ec890163 100644
--- a/lib/zlib_dfltcc/dfltcc_deflate.c
+++ b/lib/zlib_dfltcc/dfltcc_deflate.c
@@ -112,30 +112,36 @@ int dfltcc_deflate(
     int soft_bcc;
     int no_flush;
 
-    if (!dfltcc_can_deflate(strm))
+    if (!dfltcc_can_deflate(strm)) {
+        /* Clear history. */
+        if (flush == Z_FULL_FLUSH)
+            param->hl = 0;
         return 0;
+    }
 
 again:
     masked_avail_in = 0;
     soft_bcc = 0;
     no_flush = flush == Z_NO_FLUSH;
 
-    /* Trailing empty block. Switch to software, except when Continuation Flag
-     * is set, which means that DFLTCC has buffered some output in the
-     * parameter block and needs to be called again in order to flush it.
+    /* No input data. Return, except when Continuation Flag is set, which means
+     * that DFLTCC has buffered some output in the parameter block and needs to
+     * be called again in order to flush it.
      */
-    if (flush == Z_FINISH && strm->avail_in == 0 && !param->cf) {
-        if (param->bcf) {
-            /* A block is still open, and the hardware does not support closing
-             * blocks without adding data. Thus, close it manually.
-             */
+    if (strm->avail_in == 0 && !param->cf) {
+        /* A block is still open, and the hardware does not support closing
+         * blocks without adding data. Thus, close it manually.
+         */
+        if (!no_flush && param->bcf) {
             send_eobs(strm, param);
             param->bcf = 0;
         }
-        return 0;
-    }
-
-    if (strm->avail_in == 0 && !param->cf) {
+        /* Let one of deflate_* functions write a trailing empty block. */
+        if (flush == Z_FINISH)
+            return 0;
+        /* Clear history. */
+        if (flush == Z_FULL_FLUSH)
+            param->hl = 0;
         *result = need_more;
         return 1;
     }
@@ -189,7 +195,7 @@ int dfltcc_deflate(
     param->cvt = CVT_ADLER32;
     if (!no_flush)
         /* We need to close a block. Always do this in software - when there is
-         * no input data, the hardware will not nohor BCC. */
+         * no input data, the hardware will not hohor BCC. */
         soft_bcc = 1;
     if (flush == Z_FINISH && !param->bcf)
         /* We are about to open a BFINAL block, set Block Header Final bit
@@ -204,8 +210,8 @@ int dfltcc_deflate(
     param->sbb = (unsigned int)state->bi_valid;
     if (param->sbb > 0)
         *strm->next_out = (Byte)state->bi_buf;
-    if (param->hl)
-        param->nt = 0; /* Honor history */
+    /* Honor history and check value */
+    param->nt = 0;
     param->cv = strm->adler;
 
     /* When opening a block, choose a Huffman-Table Type */
-- 
2.34.1