From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Damien Le Moal <damien.lemoal@opensource.wdc.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Linus Walleij <linusw@kernel.org>,
        Imre Kaloz <kaloz@openwrt.org>,
        Krzysztof Halasa <khalasa@piap.pl>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Richard Weinberger <richard@nod.at>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Wim Van Sebroeck <wim@linux-watchdog.org>,
        Guenter Roeck <linux@roeck-us.net>,
        Marek Vasut <marex@denx.de>, Lubomir Rintel <lkundrak@v3.sk>,
        - <devicetree@vger.kernel.org>, Marc Zyngier <maz@kernel.org>,
        linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mtd@lists.infradead.org, linux-serial@vger.kernel.org,
        linux-watchdog@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 0/3] dt-bindings: serial/mtd/mc/ata: use MC peripheral props
Date:   Fri, 27 Jan 2023 10:32:14 +0100
Message-Id: <20230127093217.60818-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi,

Dependencies
============
I think entire patchset should go via one tree (Rob's). Patch #2 depends on
patch #1.  Patch #3 could go separate tree as long as others are in the
linux-next.  However for simplicity let's push everything through Rob's DT
tree?

Changelog
=========
This is a v2 of this one patch:
https://lore.kernel.org/linux-devicetree/20230123151302.368277-11-krzysztof.kozlowski@linaro.org/

Changes since v1:
1. Add patches 1 and 2 to fix dt_binding_check and few dtbs_check warnings

Best regards,
Krzysztof

Krzysztof Kozlowski (3):
  dt-bindings: intel,ixp4xx-expansion-bus: split out peripheral
    properties
  dt-bindings: reference MC peripheral properties in relevant devices
  dt-bindings: serial: restrict possible child node names

 .../ata/intel,ixp4xx-compact-flash.yaml       |  1 +
 ...intel,ixp4xx-expansion-bus-controller.yaml | 64 +--------------
 ...tel,ixp4xx-expansion-peripheral-props.yaml | 80 +++++++++++++++++++
 .../mc-peripheral-props.yaml                  |  1 +
 .../devicetree/bindings/mtd/mtd-physmap.yaml  |  1 +
 .../devicetree/bindings/serial/8250.yaml      |  1 +
 .../devicetree/bindings/serial/serial.yaml    |  2 +-
 .../bindings/watchdog/maxim,max63xx.yaml      |  1 +
 8 files changed, 87 insertions(+), 64 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml

-- 
2.34.1