From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Vinod Koul <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        Marek Szyprowski <m.szyprowski@samsung.com>,
        Sylwester Nawrocki <s.nawrocki@samsung.com>,
        linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org
Cc:     replicant@osuosl.org, phone-devel@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht,
        =?UTF-8?q?Martin=20J=C3=BCcker?= <martin.juecker@gmail.com>,
        Henrik Grimler <henrik@grimler.se>,
        Chanwoo Choi <cw00.choi@samsung.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 7/8] ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
Date:   Fri, 27 Jan 2023 20:40:56 +0100
Message-Id: <20230127194057.186458-8-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230127194057.186458-1-krzysztof.kozlowski@linaro.org>
References: <20230127194057.186458-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The DisplayPort and MIPI phys are actually part of the Power Management
Unit system controller.  They do not have their own address space, thus
keeping the nodes under soc causes warnings:

  exynos5250-arndale.dtb: soc: video-phy-0: {'compatible': ['samsung,exynos5250-dp-video-phy'],
    'samsung,pmu-syscon': [[20]], '#phy-cells': [[0]], 'phandle': [[24]]} should not be valid under {'type': 'object'}

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/exynos5250.dtsi | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 97e89859ba3d..a35c00f055a3 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -290,7 +290,7 @@ pinctrl_3: pinctrl@3860000 {
 		};
 
 		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5250-pmu", "syscon";
+			compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon";
 			reg = <0x10040000 0x5000>;
 			clock-names = "clkout16";
 			clocks = <&clock CLK_FIN_PLL>;
@@ -298,6 +298,16 @@ pmu_system_controller: system-controller@10040000 {
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			dp_phy: dp-phy {
+				compatible = "samsung,exynos5250-dp-video-phy";
+				#phy-cells = <0>;
+			};
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		watchdog@101d0000 {
@@ -810,18 +820,6 @@ mixer: mixer@14450000 {
 			status = "disabled";
 		};
 
-		dp_phy: video-phy-0 {
-			compatible = "samsung,exynos5250-dp-video-phy";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <0>;
-		};
-
-		mipi_phy: video-phy-1 {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
 		dsi_0: dsi@14500000 {
 			compatible = "samsung,exynos4210-mipi-dsi";
 			reg = <0x14500000 0x10000>;
-- 
2.34.1