From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     replicant@osuosl.org, phone-devel@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht,
        =?UTF-8?q?Martin=20J=C3=BCcker?= <martin.juecker@gmail.com>,
        Henrik Grimler <henrik@grimler.se>,
        Sam Protsenko <semen.protsenko@linaro.org>,
        Chanho Park <chanho61.park@samsung.com>,
        Marek Szyprowski <m.szyprowski@samsung.com>,
        Chanwoo Choi <cw00.choi@samsung.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [RFT PATCH v3 3/4] arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos5433
Date:   Fri, 27 Jan 2023 22:27:12 +0100
Message-Id: <20230127212713.267014-3-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230127212713.267014-1-krzysztof.kozlowski@linaro.org>
References: <20230127212713.267014-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address.  Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:

  exynos5433-tm2e.dtb: soc@0: usbdrd: {'compatible': ['samsung,exynos5433-dwusb3'], ...
    should not be valid under {'type': 'object'}

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. Fix typo/build error.

Changes since v1:
1. New patch
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 9da24fe958a3..5519a80576c5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1742,7 +1742,7 @@ hsi2c_11: i2c@14df0000 {
 			status = "disabled";
 		};
 
-		usbdrd30: usbdrd {
+		usbdrd30: usb@15400000 {
 			compatible = "samsung,exynos5433-dwusb3";
 			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
 				<&cmu_fsys CLK_SCLK_USBDRD30>,
@@ -1751,16 +1751,16 @@ usbdrd30: usbdrd {
 			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15400000 0x10000>;
 			status = "disabled";
 
-			usbdrd_dwc3: usb@15400000 {
+			usbdrd_dwc3: usb@0 {
 				compatible = "snps,dwc3";
 				clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
 					<&cmu_fsys CLK_ACLK_USBDRD30>,
 					<&cmu_fsys CLK_SCLK_USBDRD30>;
 				clock-names = "ref", "bus_early", "suspend";
-				reg = <0x15400000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -1795,7 +1795,7 @@ usbhost30_phy: phy@15580000 {
 			status = "disabled";
 		};
 
-		usbhost30: usbhost {
+		usbhost30: usb@15a00000 {
 			compatible = "samsung,exynos5433-dwusb3";
 			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
 				<&cmu_fsys CLK_SCLK_USBHOST30>,
@@ -1804,16 +1804,16 @@ usbhost30: usbhost {
 			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15a00000 0x10000>;
 			status = "disabled";
 
-			usbhost_dwc3: usb@15a00000 {
+			usbhost_dwc3: usb@0 {
 				compatible = "snps,dwc3";
 				clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
 					<&cmu_fsys CLK_ACLK_USBHOST30>,
 					<&cmu_fsys CLK_SCLK_USBHOST30>;
 				clock-names = "ref", "bus_early", "suspend";
-				reg = <0x15a00000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
-- 
2.34.1