From:   Angel Iglesias <ang.iglesiasg@gmail.com>
To:     linux-iio@vger.kernel.org
Cc:     Angel Iglesias <ang.iglesiasg@gmail.com>,
        Jonathan Cameron <jic23@kernel.org>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        Andreas Klinger <ak@it-klinger.de>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/7] Add support for pressure sensor Bosch BMP580
Date:   Sun, 29 Jan 2023 02:33:02 +0100
Message-Id: <cover.1674954271.git.ang.iglesiasg@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This patchset adds support for the new pressure sensors BMP580 extending
the bmp280 driver.

Patch 1 introduces a minor refactor of the driver structure to change how
the device matching and driver initialization is performed. In place of
the chips ids, the driver_data now contains a pointer to its chip_info.
To perform this change, a series of declarations previously on the core
file were migrated to the shared header file, to allow access to specific
fields on the chip_info on the I2C and SPI drivers. This change is
required because BMP380 and BMP580 have the same chip_id and values would
collide using the chip_id as the driver_data value.
Patch 2 introduces new preinit callback and unifies init logic across all
supported variants.
Patch 3 made calibration callback function optional.
Patch 4 deletes misleading i2c reference on bmp280 Kconfig entry.
Patch 5 extends the bmp280 driver with the new logic to read measurements
and configure the operation parameters for the BMP580 sensors.
Patch 6 updates the devicetree binding docs with the new sensor id.
Patch 7 adds the NVMEM operations to read and program the NVM user range
contained in the non-volatile memory of the BMP580 sensors.

Changes in v3:
* Refactor driver structure to use chip_info structs as driver_data and
  updated i2c and spi implementations device match codepaths.
* Deleted Kconfig driver title misleading i2c reference.
* Made calibration reading optional as a prerequisite patch in preparation
  for the bmp580 built in compensation.
* Break command helper function in soft-reset helper function and NVM
  operation helper.
* Fixed minor styling issues thorough patches.

Changes in v2:
* For patch 3, fixed missing retcodes reported by the kernel test robot.
* For patch 5, fixed logic paths that left the sensor mutex locked
  reported by the kernel test robot.

Angel Iglesias (7):
  iio: pressure: bmp280: Use chip_info pointers for each chip as driver
    data
  iio: pressure: bmp280: Add preinit callback
  iio: pressure: bmp280: Make read calibration callback optional
  iio: pressure: Kconfig: Delete misleading I2C reference on bmp280
    title
  iio: pressure: bmp280: Add support for new sensor BMP580
  dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
  iio: pressure: bmp280: Add nvmem operations for BMP580

 .../bindings/iio/pressure/bmp085.yaml         |   2 +
 drivers/iio/pressure/Kconfig                  |   6 +-
 drivers/iio/pressure/bmp280-core.c            | 762 ++++++++++++++----
 drivers/iio/pressure/bmp280-i2c.c             |  45 +-
 drivers/iio/pressure/bmp280-regmap.c          |  60 ++
 drivers/iio/pressure/bmp280-spi.c             |  47 +-
 drivers/iio/pressure/bmp280.h                 | 273 ++++++-
 7 files changed, 958 insertions(+), 237 deletions(-)


base-commit: 354f23ac2c8703d170354577738edad159a7d37b
-- 
2.39.1