From:   Andrew Halaney <ahalaney@redhat.com>
To:     andersson@kernel.org
Cc:     agross@kernel.org, konrad.dybcio@linaro.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        bmasney@redhat.com, quic_shazhuss@quicinc.com,
        Andrew Halaney <ahalaney@redhat.com>
Subject: [PATCH v2 1/2] arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settings
Date:   Mon, 30 Jan 2023 09:48:22 -0600
Message-Id: <20230130154823.117542-1-ahalaney@redhat.com>
MIME-Version: 1.0
Content-type: text/plain
Content-Transfer-Encoding: 8bit
Precedence: bulk

Some of the pinctrl groups were invalid for the selected pins. Select
the proper qup group to fix these warnings:

[    6.523566] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio135" for function "qup15"
[    6.535042] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio136" for function "qup15"
[    6.597536] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio158" for function "qup15"
[    6.597544] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio159" for function "qup15"
[    6.597991] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio0" for function "qup15"
[    6.597996] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio1" for function "qup15"

Fixes: e073899ec3e1 ("arm64: dts: qcom: sa8540p-ride: add i2c nodes")
Reviewed-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v1:
	* collected Reviewed-by tags

 arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index a43f831f9018..6ab4b435c49e 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -318,21 +318,21 @@ &xo_board_clk {
 &tlmm {
 	i2c0_default: i2c0-default-state {
 		pins = "gpio135", "gpio136";
-		function = "qup15";
+		function = "qup0";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
 
 	i2c1_default: i2c1-default-state {
 		pins = "gpio158", "gpio159";
-		function = "qup15";
+		function = "qup1";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
 
 	i2c12_default: i2c12-default-state {
 		pins = "gpio0", "gpio1";
-		function = "qup15";
+		function = "qup12";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
-- 
2.39.1