Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760493AbXHaJEq (ORCPT ); Fri, 31 Aug 2007 05:04:46 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755423AbXHaJEh (ORCPT ); Fri, 31 Aug 2007 05:04:37 -0400 Received: from mi0.bluebottle.com ([206.188.25.15]:53721 "EHLO mi0.bluebottle.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754597AbXHaJEe (ORCPT ); Fri, 31 Aug 2007 05:04:34 -0400 DomainKey-Signature: a=rsa-sha1; s=mail; d=bluebottle.com; c=nofws; q=dns; h=received:from:to:cc:references:subject:date:mime-version: content-type:content-transfer-encoding:x-priority: x-msmail-priority:x-mailer:x-mimeole:x-trusted-delivery; b=eswLEk9TiW/31Ef4TG93ITmHVkTbLrCG0nxrao8AT8oZP4llPBTQqbItR7o+vASzK nou3Ynn7CWicb8EHuahpUjoCwbgE0VVWG6VYATMBvcNdow6My1iKHDDYzRKjene Message-Id: <200708310904.l7V94YE3015312@mi0.bluebottle.com> From: "n" To: "Alan Cox" Cc: , References: <46D59ED2.4000900@free.fr> <20070829174657.09c7de3c@the-village.bc.nu> <46D67D09.6090101@free.fr> <46D69E03.9080403@vc.cvut.cz> <46D6B85C.5050509@free.fr> <46D6DDF6.6080400@free.fr> <20070831003127.6f6950f4@the-village.bc.nu> <46D7CFD7.9030404@free.fr> Subject: PROBLEM: kernel 2.6.22.6 pata_pdc202xx_old.c limiting to UDMA/33 instead of UDMA/100 (UPDATED 2.6.22.6) Date: Fri, 31 Aug 2007 02:04:40 -0700 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="Windows-1252"; reply-type=response Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.3138 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3138 X-Trusted-Delivery: <867e791c4703f2003793ecb5e165cdc1> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 34056 Lines: 786 Update with kernel 2.6.22.6 i am getting this error now ata2.00: ATA-6: ST3120026A, 3.06, max UDMA/100 here is the new error. ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9c:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete here is dmseg output [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sd 3:0:0:0: [sde] Attached SCSI disk scsi 3:0:1:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5 sd 3:0:1:0: [sdf] 240121728 512-byte hardware sectors (122942 MB) sd 3:0:1:0: [sdf] Write Protect is off sd 3:0:1:0: [sdf] Mode Sense: 00 3a 00 00 sd 3:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:1:0: [sdf] 240121728 512-byte hardware sectors (122942 MB) sd 3:0:1:0: [sdf] Write Protect is off sd 3:0:1:0: [sdf] Mode Sense: 00 3a 00 00 sd 3:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sd 3:0:1:0: [sdf] Attached SCSI disk usbmon: debugfs is not available USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:04.2: UHCI Host Controller uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:04.2: irq 11, io base 0x0000d400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:04.3: UHCI Host Controller uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:04.3: irq 11, io base 0x0000d000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com input: AT Translated Set 2 keyboard as /class/input/input2 usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice usb 1-2: new low speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev hiddev96: USB HID v1.10 Device [CPS UPS AE550] on usb-0000:00:04.2-1 input: Logitech USB Receiver as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:04.2-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ACPI: PCI Interrupt 0000:00:04.5[C] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:04.5 to 64 ALSA device list: #0: VIA 82C686A/B rev20 with AD1881A at 0xb800, irq 10 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode XFS mounting filesystem sdc2 Ending clean XFS mount for filesystem: sdc2 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 208k freed sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:1:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:1:0: Attached scsi generic sg3 type 0 sd 3:0:0:0: Attached scsi generic sg4 type 0 sd 3:0:1:0: Attached scsi generic sg5 type 0 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] parport_pc: VIA parallel port: io=0x378, irq=7 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 eth0: RTL8169sb/8110sb at 0xe882c000, 00:14:d1:38:5e:25, IRQ 11 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 eth1: RealTek RTL8139 at 0x8800, 00:40:05:3a:15:c4, IRQ 5 eth1: Identified 8139 chip type 'RTL-8100B/8139D' via686a 0000:00:04.4: base address not set - upgrade BIOS or use force_addr=0xaddr Adding 390560k swap on /dev/sdc1. Priority:-1 extents:1 across:390560k XFS mounting filesystem sdc3 Ending clean XFS mount for filesystem: sdc3 XFS mounting filesystem sdc4 Ending clean XFS mount for filesystem: sdc4 XFS mounting filesystem sdd1 Ending clean XFS mount for filesystem: sdd1 XFS mounting filesystem sde1 Ending clean XFS mount for filesystem: sde1 XFS mounting filesystem sdf1 Ending clean XFS mount for filesystem: sdf1 ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.01: (BMDMA stat 0x4) ata2.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.01: configured for UDMA/33 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.01: (BMDMA stat 0x4) ata2.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.01: configured for UDMA/33 ata2: EH complete sd 1:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.01: (BMDMA stat 0x4) ata2.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.01: configured for UDMA/33 ata2: EH complete sd 1:0:1:0: [sdb] Write Protect is off sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 ata2.01: limiting speed to UDMA/25:PIO4 ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.01: (BMDMA stat 0x4) ata2.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.01: (BMDMA stat 0x4) ata2.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.01: (BMDMA stat 0x4) ata2.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.01: configured for UDMA/25 sd 1:0:1:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:1:0: [sdb] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 3f sd 1:0:1:0: [sdb] ASC=0x47 ASCQ=0x0 end_request: I/O error, dev sdb, sector 63 ata2: EH complete sd 1:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) Filesystem "sdb1": Disabling barriers, trial barrier write failed sd 1:0:1:0: [sdb] Write Protect is off sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 XFS mounting filesystem sdb1 sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) sd 1:0:1:0: [sdb] Write Protect is off sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9c:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9c:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9c:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9c:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9c:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9c:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 sd 1:0:1:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:1:0: [sdb] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 3f sd 1:0:1:0: [sdb] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sdb, sector 117218341 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9d:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9d:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9d:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9d:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9d:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.01: cmd ca/00:00:25:9d:fc/00:00:00:00:00/f6 tag 0 cdb 0x0 data 131072 out res 40/00:00:3f:00:00/00:00:00:00:00/f0 Emask 0x4 (timeout) ata2: port is slow to respond, please be patient (Status 0xfe) ata2: device not ready (errno=-16), forcing hardreset ata2: soft resetting port ata2.01: configured for UDMA/25 sd 1:0:1:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:1:0: [sdb] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 3f sd 1:0:1:0: [sdb] ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sdb, sector 117218597 ata2: EH complete xfs_force_shutdown(sdb1,0x1) called from line 423 of file fs/xfs/xfs_rw.c. Return address = 0xc020c098 Filesystem "sdb1": I/O Error Detected. Shutting down filesystem: sdb1 Please umount the filesystem, and rectify the problem(s) I/O error in filesystem ("sdb1") meta-data dev sdb1 block 0x6fc9be6 ("xlog_bwrite") error 5 buf count 262144 XFS: failed to locate log tail XFS: log mount/recovery failed: error 5 XFS: log mount failed sd 1:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) sd 1:0:1:0: [sdb] Write Protect is off sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) sd 1:0:1:0: [sdb] Write Protect is off sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 r8169: eth0: link up eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1 ata1: soft resetting port ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2: soft resetting port ata2.01: configured for UDMA/25 ata2: EH complete sd 1:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) sd 1:0:1:0: [sdb] Write Protect is off sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (5119 buckets, 40952 max) NET: Registered protocol family 10 lo: Disabled Privacy Extensions Capability LSM initialized eth1: no IPv6 routers present eth0: no IPv6 routers present PPP generic driver version 2.4.2 IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ipv6tb: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team PPP BSD Compression module registered Here is my previous post (not sure if anyone read it im new to mailing lists also ata1 below is ata2 above since i changed it to port 2 so its the same seagate drive.) hello, with kernel 2.6.22.5 using the new pata_pdc202xx_old driver it doesn't detect the cable right on this seagate drive (i tried switching ports / cables ...etc) it detects the maxtor drive fine no matter what port its on, the seagate doesnt detect correctly on either port ata1.00: ATA-6: ST3120026A, 3.06, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/33 ata2.00: ATA-7: Maxtor 6B200R0, max UDMA/133 ata2.00: 398297088 sectors, multi 16: LBA48 ata2.00: configured for UDMA/100 i was searching goolge and i found other uses with the same problem and had seagate drives (maybe the cable detect code is differnt in seagate?) btw only devices sda and sdb are on the pata_pdc202xx_old card. sdc-g are on the new via driver. i also get this error about 50 of them (dmsg cut top output where it had info about the cable error) anyways if you scroll down you will see errors like this ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete ..etc .... Ends up here ata1: EH complete ata1.00: limiting speed to PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:00:21:9d:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072 out res 51/84:00:21:9d:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for PIO4 <- pio4 so is it even going lower? ata1: EH complete here is most of output from dmsg if you need it. sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk pata_via 0000:00:04.1: version 0.3.1 scsi2 : pata_via scsi3 : pata_via ata3: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001d800 irq 14 ata4: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001d808 irq 15 ata3.00: ATA-6: Maxtor 5T040H4, TAH71DP0, max UDMA/100 ata3.00: 80043264 sectors, multi 16: LBA ata3.01: ATA-6: WDC WD800BB-55JKC0, 05.01C05, max UDMA/100 ata3.01: 156301488 sectors, multi 16: LBA ata3.00: configured for UDMA/66 ata3.01: configured for UDMA/66 ata4.00: ATA-5: MAXTOR 4K080H4, A08.1500, max UDMA/100 ata4.00: 156301488 sectors, multi 16: LBA ata4.01: ATA-7: Maxtor 6Y120L0, YAR41VW0, max UDMA/133 ata4.01: 240121728 sectors, multi 16: LBA ata4.00: configured for UDMA/66 ata4.01: configured for UDMA/66 scsi 2:0:0:0: Direct-Access ATA Maxtor 5T040H4 TAH7 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 80043264 512-byte hardware sectors (40982 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 80043264 512-byte hardware sectors (40982 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sdc4 sd 2:0:0:0: [sdc] Attached SCSI disk scsi 2:0:1:0: Direct-Access ATA WDC WD800BB-55JK 05.0 PQ: 0 ANSI: 5 sd 2:0:1:0: [sdd] 156301488 512-byte hardware sectors (80026 MB) sd 2:0:1:0: [sdd] Write Protect is off sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:1:0: [sdd] 156301488 512-byte hardware sectors (80026 MB) sd 2:0:1:0: [sdd] Write Protect is off sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sd 2:0:1:0: [sdd] Attached SCSI disk scsi 3:0:0:0: Direct-Access ATA MAXTOR 4K080H4 A08. PQ: 0 ANSI: 5 sd 3:0:0:0: [sde] 156301488 512-byte hardware sectors (80026 MB) sd 3:0:0:0: [sde] Write Protect is off sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sde] 156301488 512-byte hardware sectors (80026 MB) sd 3:0:0:0: [sde] Write Protect is off sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sd 3:0:0:0: [sde] Attached SCSI disk scsi 3:0:1:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5 sd 3:0:1:0: [sdf] 240121728 512-byte hardware sectors (122942 MB) sd 3:0:1:0: [sdf] Write Protect is off sd 3:0:1:0: [sdf] Mode Sense: 00 3a 00 00 sd 3:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:1:0: [sdf] 240121728 512-byte hardware sectors (122942 MB) sd 3:0:1:0: [sdf] Write Protect is off sd 3:0:1:0: [sdf] Mode Sense: 00 3a 00 00 sd 3:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sd 3:0:1:0: [sdf] Attached SCSI disk usbmon: debugfs is not available USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:04.2: UHCI Host Controller uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:04.2: irq 11, io base 0x0000d400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:04.3: UHCI Host Controller uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:04.3: irq 11, io base 0x0000d000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com input: AT Translated Set 2 keyboard as /class/input/input2 usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice usb 1-2: new low speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev hiddev96: USB HID v1.10 Device [CPS UPS AE550] on usb-0000:00:04.2-1 input: Logitech USB Receiver as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:04.2-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ACPI: PCI Interrupt 0000:00:04.5[C] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:04.5 to 64 ALSA device list: #0: VIA 82C686A/B rev20 with AD1881A at 0xb800, irq 10 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode XFS mounting filesystem sdc2 Ending clean XFS mount for filesystem: sdc2 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 224k freed 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 eth0: RealTek RTL8139 at 0x8800, 00:40:05:3a:15:c4, IRQ 5 eth0: Identified 8139 chip type 'RTL-8100B/8139D' r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 eth1: RTL8169sb/8110sb at 0xe882c000, 00:14:d1:38:5e:25, IRQ 11 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] parport_pc: VIA parallel port: io=0x378, irq=7 via686a 0000:00:04.4: base address not set - upgrade BIOS or use force_addr=0xaddr Adding 390560k swap on /dev/sdc1. Priority:-1 extents:1 across:390560k XFS mounting filesystem sdc3 Ending clean XFS mount for filesystem: sdc3 XFS mounting filesystem sdc4 Ending clean XFS mount for filesystem: sdc4 XFS mounting filesystem sdd1 Ending clean XFS mount for filesystem: sdd1 XFS mounting filesystem sde1 Ending clean XFS mount for filesystem: sde1 XFS mounting filesystem sdf1 Ending clean XFS mount for filesystem: sdf1 XFS mounting filesystem sdb1 Ending clean XFS mount for filesystem: sdb1 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 ata1.00: limiting speed to UDMA/25:PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 ata1: EH complete sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:01:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 512 out res 51/84:00:3f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 3f sd 0:0:0:0: [sda] ASC=0x47 ASCQ=0x0 end_request: I/O error, dev sda, sector 63 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) Filesystem "sda1": Disabling barriers, trial barrier write failed sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 XFS mounting filesystem sda1 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:00:21:9c:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072 out res 51/84:00:21:9c:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:00:21:9c:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072 out res 51/84:00:21:9c:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:00:21:9c:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072 out res 51/84:00:21:9c:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:00:21:9c:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072 out res 51/84:00:21:9c:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:00:21:9c:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072 out res 51/84:00:21:9c:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:00:21:9c:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072 out res 51/84:00:21:9c:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 06 fc 9c 21 sd 0:0:0:0: [sda] ASC=0x47 ASCQ=0x0 end_request: I/O error, dev sda, sector 117218337 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:00:21:9d:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072 out res 51/84:00:21:9d:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:00:21:9d:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072 out res 51/84:00:21:9d:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/25 ata1: EH complete ata1.00: limiting speed to PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x4) ata1.00: cmd ca/00:00:21:9d:fc/00:00:00:00:00/e6 tag 0 cdb 0x0 data 131072 out res 51/84:00:21:9d:fc/00:00:00:00:00/e6 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for PIO4 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) xfs_force_shutdown(sda1,0x1) called from line 423 of file fs/xfs/xfs_rw.c. Return address = 0xc020cea8 Filesystem "sda1": I/O Error Detected. Shutting down filesystem: sda1 Please umount the filesystem, and rectify the problem(s) I/O error in filesystem ("sda1") meta-data dev sda1 block 0x6fc9be2 ("xlog_bwrite") error 5 buf count 262144 XFS: failed to locate log tail XFS: log mount/recovery failed: error 5 XFS: log mount failed sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA end of dmesg there is nothing wrong with the xfs filesystem it mounts fine on the system ide ports so this might be another bug in the new pdc driver xfs_force_shutdown(sda1,0x1) called from line 423 of file fs/xfs/xfs_rw.c. Return address = 0xc020cea8 Filesystem "sda1": I/O Error Detected. Shutting down filesystem: sda1 Please umount the filesystem, and rectify the problem(s) I/O error in filesystem ("sda1") meta-data dev sda1 block 0x6fc9be2 ("xlog_bwrite") error 5 buf count 262144 XFS: failed to locate log tail XFS: log mount/recovery failed: error 5 XFS: log mount failed ### after the kernel finnishes booting i can mount that drive fine (also all the xfs_check xfs_repair ..etc say there is no errors) but i think the drive is in pio4 by the time its done. the ide old driver seemed to work ok with this drive also the system mainboard ide ports work too. i tried changing the drive jumpers around and that also didnt help just to add i tried switching my drives around i moved a wd drive to port 2 of the pdc controller and it worked fine so if a maxtor and a wd drive is hooked up it detects as udma100, this seems to be a error with seagate drives only, and i should also note i tried the seagate on the mainboard chipset (uses the pata_via.c driver) and it detected the seagate fine and set udma 100 on it. Im not sure whats differnt in pata_via.c and pata_pdc202xx_old.c but somethings wrong with the cable / or mode set in the pdc driver, atleast with seagate drives. ---------------------------------------------------------------------- Finally - A spam blocker that actually works. http://www.bluebottle.com/tag/4 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/