MIME-Version: 1.0
References: <20230106030108.2542081-1-swboyd@chromium.org> <CAD=FV=U0Bwx4HzCSL8EE-+ngGLZ-NqpbC+J9jby84FKBOB_ddQ@mail.gmail.com>
 <CAD=FV=VMebqPd2ozLzY65Kba9snLKQ-KKd684O0cGQzyP0kcwQ@mail.gmail.com>
In-Reply-To: <CAD=FV=VMebqPd2ozLzY65Kba9snLKQ-KKd684O0cGQzyP0kcwQ@mail.gmail.com>
From:   Doug Anderson <dianders@chromium.org>
Date:   Tue, 31 Jan 2023 13:27:01 -0800
Message-ID: <CAD=FV=UJOf7X-Jk0seB=Krt53Mzm6NztjP_KdT265zz=EsKp2A@mail.gmail.com>
Subject: Re: [PATCH] drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed
 during disable
To:     Stephen Boyd <swboyd@chromium.org>
Cc:     Thierry Reding <thierry.reding@gmail.com>,
        linux-kernel@vger.kernel.org, patches@lists.linux.dev,
        dri-devel@lists.freedesktop.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org,
        yangcong <yangcong5@huaqin.corp-partner.google.com>,
        Jitao Shi <jitao.shi@mediatek.com>,
        Sam Ravnborg <sam@ravnborg.org>,
        Rob Clark <robdclark@chromium.org>,
        Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi,

On Thu, Jan 26, 2023 at 4:52 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Wed, Jan 18, 2023 at 1:34 PM Doug Anderson <dianders@chromium.org> wrote:
> >
> > Hi,
> >
> > On Thu, Jan 5, 2023 at 7:01 PM Stephen Boyd <swboyd@chromium.org> wrote:
> > >
> > > The unprepare sequence has started to fail after moving to panel bridge
> > > code in the msm drm driver (commit 007ac0262b0d ("drm/msm/dsi: switch to
> > > DRM_PANEL_BRIDGE")). You'll see messages like this in the kernel logs:
> > >
> > >    panel-boe-tv101wum-nl6 ae94000.dsi.0: failed to set panel off: -22
> > >
> > > This is because boe_panel_enter_sleep_mode() needs an operating DSI link
> > > to set the panel into sleep mode. Performing those writes in the
> > > unprepare phase of bridge ops is too late, because the link has already
> > > been torn down by the DSI controller in post_disable, i.e. the PHY has
> > > been disabled, etc. See dsi_mgr_bridge_post_disable() for more details
> > > on the DSI .
> > >
> > > Split the unprepare function into a disable part and an unprepare part.
> > > For now, just the DSI writes to enter sleep mode are put in the disable
> > > function. This fixes the panel off routine and keeps the panel happy.
> > >
> > > My Wormdingler has an integrated touchscreen that stops responding to
> > > touch if the panel is only half disabled too. This patch fixes it. And
> > > finally, this saves power when the screen is off because without this
> > > fix the regulators for the panel are left enabled when nothing is being
> > > displayed on the screen.
> > >
> > > Fixes: 007ac0262b0d ("drm/msm/dsi: switch to DRM_PANEL_BRIDGE")
> > > Fixes: a869b9db7adf ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel")
> > > Cc: yangcong <yangcong5@huaqin.corp-partner.google.com>
> > > Cc: Douglas Anderson <dianders@chromium.org>
> > > Cc: Jitao Shi <jitao.shi@mediatek.com>
> > > Cc: Sam Ravnborg <sam@ravnborg.org>
> > > Cc: Rob Clark <robdclark@chromium.org>
> > > Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > > Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> > > ---
> > >  drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 16 ++++++++++++----
> > >  1 file changed, 12 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> > > index 857a2f0420d7..c924f1124ebc 100644
> > > --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> > > +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> > > @@ -1193,14 +1193,11 @@ static int boe_panel_enter_sleep_mode(struct boe_panel *boe)
> > >         return 0;
> > >  }
> > >
> > > -static int boe_panel_unprepare(struct drm_panel *panel)
> > > +static int boe_panel_disable(struct drm_panel *panel)
> > >  {
> > >         struct boe_panel *boe = to_boe_panel(panel);
> > >         int ret;
> > >
> > > -       if (!boe->prepared)
> > > -               return 0;
> > > -
> > >         ret = boe_panel_enter_sleep_mode(boe);
> > >         if (ret < 0) {
> > >                 dev_err(panel->dev, "failed to set panel off: %d\n", ret);
> > > @@ -1209,6 +1206,16 @@ static int boe_panel_unprepare(struct drm_panel *panel)
> > >
> > >         msleep(150);
> > >
> > > +       return 0;
> > > +}
> > > +
> > > +static int boe_panel_unprepare(struct drm_panel *panel)
> > > +{
> > > +       struct boe_panel *boe = to_boe_panel(panel);
> > > +
> > > +       if (!boe->prepared)
> > > +               return 0;
> > > +
> > >         if (boe->desc->discharge_on_disable) {
> > >                 regulator_disable(boe->avee);
> > >                 regulator_disable(boe->avdd);
> > > @@ -1528,6 +1535,7 @@ static enum drm_panel_orientation boe_panel_get_orientation(struct drm_panel *pa
> > >  }
> > >
> > >  static const struct drm_panel_funcs boe_panel_funcs = {
> > > +       .disable = boe_panel_disable,
> > >         .unprepare = boe_panel_unprepare,
> > >         .prepare = boe_panel_prepare,
> > >         .enable = boe_panel_enable,
> >
> > As mentioned by Stephen, my initial reaction was that this felt
> > asymmetric. We were moving some stuff from unprepare() to disable()
> > and it felt like that would mean we would also need to move something
> > from prepare() to enable. Initially I thought maybe that "something"
> > was all of boe_panel_init_dcs_cmd() but I guess that didn't work.
> >
> > I don't truly have a reason that this _has_ to be symmetric. I was
> > initially worried that there might be some place where we call
> > pre_enable(), then never call enable() / disable(), and then call
> > post_disable(). That could have us in a bad state because we'd never
> > enter sleep mode / turn the display off. However (as I think I've
> > discovered before and just forgot), I don't think this is possible
> > because we always call pre-enable() and enable() together. Also, as
> > mentioned by Sam, we're about to fully shut the panel's power off so
> > (unless it's on a shared rail) it probably doesn't really matter.
> >
> > Thus, I'd be OK with:
> >
> > Reviewed-by: Douglas Anderson <dianders@chromium.org>
> >
> > I'm also happy to land this (adding Cc: stable) to drm-misc-fixes if
> > nobody has any objections (also happy if someone else wants to land
> > it). I guess the one worry I have is that somehow this could break
> > something for one of the other 8 panels that this driver supports (or
> > it could have bad interactions with the display controller used on a
> > board with one of these panels?). Maybe we should have "Cc: stable"
> > off just to give it extra bake time? ...and maybe even push to
> > drm-misc-next instead of -fixes again to give extra bake time?
>
> This thread has gone silent. I'll plan to land the patch in
> drm-misc-next early next week, maybe Monday, _without_ Ccing stable,
> so we have the longest possible bake time. If anyone has objections,
> please yell.

Pushed to drm-misc-next:

c913cd548993 drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed
during disable