Date:   Fri, 3 Feb 2023 17:00:14 +0200
From:   Vladimir Oltean <olteanv@gmail.com>
To:     Andrew Lunn <andrew@lunn.ch>
Cc:     Daniel Golle <daniel@makrotopia.org>, netdev@vger.kernel.org,
        linux-mediatek@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Russell King <linux@armlinux.org.uk>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Lorenzo Bianconi <lorenzo@kernel.org>,
        Mark Lee <Mark-MC.Lee@mediatek.com>,
        John Crispin <john@phrozen.org>, Felix Fietkau <nbd@nbd.name>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        DENG Qingfang <dqfext@gmail.com>,
        Landen Chao <Landen.Chao@mediatek.com>,
        Sean Wang <sean.wang@mediatek.com>,
        Paolo Abeni <pabeni@redhat.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Eric Dumazet <edumazet@google.com>,
        "David S. Miller" <davem@davemloft.net>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Jianhui Zhao <zhaojh329@gmail.com>,
        =?utf-8?B?QmrDuHJu?= Mork <bjorn@mork.no>
Subject: Re: [PATCH 7/9] net: pcs: add driver for MediaTek SGMII PCS
Message-ID: <20230203150014.ugkasp4rq5arqs6s@skbuf>
References: <cover.1675407169.git.daniel@makrotopia.org>
 <30f3ff512a2082ba4cf58bf6098f2ed776051976.1675407169.git.daniel@makrotopia.org>
 <Y90Wxb8iuCRo06yr@lunn.ch>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <Y90Wxb8iuCRo06yr@lunn.ch>
Precedence: bulk

On Fri, Feb 03, 2023 at 03:14:29PM +0100, Andrew Lunn wrote:
> > index 6e7e6c346a3e..cf65646656e9 100644
> > --- a/drivers/net/pcs/Kconfig
> > +++ b/drivers/net/pcs/Kconfig
> > @@ -18,6 +18,12 @@ config PCS_LYNX
> >  	  This module provides helpers to phylink for managing the Lynx PCS
> >  	  which is part of the Layerscape and QorIQ Ethernet SERDES.
> >  
> > +config PCS_MTK
> > +	tristate
> > +	help
> > +	  This module provides helpers to phylink for managing the LynxI PCS
> > +	  which is part of MediaTek's SoC and Ethernet switch ICs.
> 
> You should probably have a more specific name, for when MTK produces a
> new PCS which is completely different.
> 
> Also, how similar is this LynxI PCS to the Lynx PCS?

Probably not very similar. Here's the Mediatek 32-bit memory map,
translated by me to a 16-bit MDIO memory map:

/* SGMII subsystem config registers */
/* BMCR (low 16) BMSR (high 16) */
#define SGMSYS_PCS_CONTROL_1		0x0		// BMCR at MDIO addr 0x0, BMSR at 0x1, aka standard

#define SGMSYS_PCS_DEVICE_ID		0x4		// PHYSID1 at 0x2, PHYSID2 at 0x3, aka standard

#define SGMSYS_PCS_ADVERTISE		0x8		// MII_ADV at 0x4, MII_LPA at 0x5

#define SGMSYS_PCS_SCRATCH		0x14		// MDIO address 0xa

/* Register to programmable link timer, the unit in 2 * 8ns */
#define SGMSYS_PCS_LINK_TIMER		0x18		// MDIO address 0xc

/* Register to control remote fault */
#define SGMSYS_SGMII_MODE		0x20		// MDIO address 0x10

/* Register to reset SGMII design */
#define SGMII_RESERVED_0		0x34		// MDIO address 0x1a

/* Register to set SGMII speed, ANA RG_ Control Signals III */
#define SGMSYS_ANA_RG_CS3		0x2028		// not sure how to access this through C22, OTOH not used?

/* Register to power up QPHY */
#define SGMSYS_QPHY_PWR_STATE_CTRL	0xe8		// again, not sure how to access through C22


Compared to these definitions for Lynx, the rest being standard regs:

#define LINK_TIMER_LO			0x12
#define LINK_TIMER_HI			0x13
#define IF_MODE				0x14

So the standard bits appear to be common, the vendor extensions different.
When I say common, I only take into consideration the memory map, not
the differences in handling. For example, what Lynx handles as a single
call to phylink_mii_c22_pcs_get_state(), the Mediatek PCS handles as a
call to mtk_pcs_get_state().