Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754646AbXICHZn (ORCPT ); Mon, 3 Sep 2007 03:25:43 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751386AbXICHZd (ORCPT ); Mon, 3 Sep 2007 03:25:33 -0400 Received: from nwd2mail11.analog.com ([137.71.25.57]:46742 "EHLO nwd2mail11.analog.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750822AbXICHZb convert rfc822-to-8bit (ORCPT ); Mon, 3 Sep 2007 03:25:31 -0400 X-IronPort-AV: i="4.20,201,1186372800"; d="scan'208"; a="38763758:sNHT55035197" Subject: [PATCH] Blackfin BF54x NAND Flash Controller driver From: Bryan Wu Reply-To: bryan.wu@analog.com To: David Woodhouse , Thomas Gleixner , linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org, akpm@linux-foundation.org Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Organization: Analog Devices, Ltd. Date: Mon, 03 Sep 2007 15:25:23 +0800 Message-Id: <1188804323.29566.6.camel@roc-laptop> Mime-Version: 1.0 X-Mailer: Evolution 2.10.1 X-OriginalArrivalTime: 03 Sep 2007 07:25:28.0581 (UTC) FILETIME=[9A5E8B50:01C7EDFB] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24267 Lines: 934 This is the driver for latest Blackfin BF54x nand flash controller - use nand_chip and mtd_info common nand driver interface - provide both PIO and dma operation - compiled with ezkit bf548 configuration - use hardware 1-bit ECC - tested with YAFFS2 and can mount YAFFS2 filesystem as rootfs Signed-off-by: Bryan Wu --- drivers/mtd/nand/Kconfig | 18 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/bf54x_nand.c | 796 ++++++++++++++++++++++++++++++++ include/asm-blackfin/mach-bf548/dma.h | 1 + include/asm-blackfin/mach-bf548/nand.h | 47 ++ 5 files changed, 863 insertions(+), 0 deletions(-) create mode 100644 drivers/mtd/nand/bf54x_nand.c create mode 100644 include/asm-blackfin/mach-bf548/nand.h diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7992c43..87e9f80 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -131,6 +131,24 @@ config MTD_NAND_AU1550 This enables the driver for the NAND flash controller on the AMD/Alchemy 1550 SOC. +config MTD_NAND_BF54X + tristate "NAND Flash support for Blackfin BF54X SoC DSP" + depends on BF54x && MTD_NAND + help + This enables the NAND flash controller on the BF54X SoC DPSs + + No board specific support is done by this driver, each board + must advertise a platform_device for the driver to attach. + +config MTD_NAND_BF54X_HWECC + bool "BF54X NAND Hardware ECC" + depends on MTD_NAND_BF54X + help + Enable the use of the BF54X's internal ECC generator when + using NAND. Early versions of the chip have had problems with + incorrect ECC generation, and if using these, the default of + software ECC is preferable. + config MTD_NAND_RTC_FROM4 tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)" depends on SH_SOLUTION_ENGINE diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index b16d234..cbf2bab 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_TOTO) += toto.o obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o +obj-$(CONFIG_MTD_NAND_BF54X) += bf54x_nand.o obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o diff --git a/drivers/mtd/nand/bf54x_nand.c b/drivers/mtd/nand/bf54x_nand.c new file mode 100644 index 0000000..dccb94a --- /dev/null +++ b/drivers/mtd/nand/bf54x_nand.c @@ -0,0 +1,796 @@ +/* linux/drivers/mtd/nand/bf54x_nand.c + * + * Copyright 2006-2007 Analog Devices Inc. + * http://blackfin.uclinux.org/ + * Bryan Wu + * + * Blackfin BF54x on-chip NAND flash controler driver + * + * Derived from drivers/mtd/nand/s3c2410.c + * Copyright (c) 2007 Ben Dooks + * + * Derived from drivers/mtd/nand/cafe.c + * Copyright © 2006 Red Hat, Inc. + * Copyright © 2006 David Woodhouse + * + * Changelog: + * 12-Jun-2007 Bryan Wu: Initial version + * 18-Jul-2007 Bryan Wu: + * - ECC_HW and ECC_SW supported + * - DMA supported in ECC_HW + * - YAFFS tested as rootfs in both ECC_HW and ECC_SW + * + * TODO: + * Enable JFFS2 over NAND as rootfs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define DRV_NAME "bf54x-nand" +#define DRV_VERSION "1.0" +#define DRV_AUTHOR "Bryan Wu " +#define DRV_DESC "BF54x on-chip NAND FLash Controller Driver" + +#ifdef CONFIG_MTD_NAND_BF54X_HWECC +int hardware_ecc = 1; +#else +int hardware_ecc = 0; +#endif + +unsigned short bfin_nfc_pin_req[] = {P_NAND_CE, P_NAND_RB, 0}; + +/*---------------------------------------------------------------------------- + * Data structures for bf54x nand flash controller driver + */ + +/* bf54x nand info */ +struct bf54x_nand_info { + /* mtd info */ + struct nand_hw_control controller; + struct mtd_info mtd; + struct nand_chip chip; + + /* platform info */ + struct bf54x_nand_platform *platform; + + /* device info */ + struct device *device; + + /* DMA stuff */ + struct completion dma_completion; +}; + +/*---------------------------------------------------------------------------- + * Conversion functions + */ +static struct bf54x_nand_info *mtd_to_nand_info(struct mtd_info *mtd) +{ + return container_of(mtd, struct bf54x_nand_info, mtd); +} + +static struct bf54x_nand_info *to_nand_info(struct platform_device *pdev) +{ + return platform_get_drvdata(pdev); +} + +static struct bf54x_nand_platform *to_nand_plat(struct platform_device *pdev) +{ + return pdev->dev.platform_data; +} + + +/*---------------------------------------------------------------------------- + * struct nand_chip interface function pointers + */ + +/* + * bf54x_nand_hwcontrol + * + * Issue command and address cycles to the chip + */ +static void bf54x_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + if (cmd == NAND_CMD_NONE) + return; + + while (bfin_read_NFC_STAT() & WB_FULL) + continue; + + if (ctrl & NAND_CLE) + bfin_write_NFC_CMD(cmd); + else + bfin_write_NFC_ADDR(cmd); + SSYNC(); +} + +/* + * bf54x_nand_devready() + * + * returns 0 if the nand is busy, 1 if it is ready + */ +static int bf54x_nand_devready(struct mtd_info *mtd) +{ + unsigned short val = bfin_read_NFC_IRQSTAT(); + + if ((val & NBUSYIRQ) == NBUSYIRQ) + return 1; + else + return 0; +} + +/*---------------------------------------------------------------------------- + * ECC functions + * + * These allow the bf54x to use the controller's ECC + * generator block to ECC the data as it passes through + */ +static inline int count_bits(uint32_t byte) +{ + int res = 0; + + for (; byte; byte >>= 1) + res += byte & 0x01; + return res; +} + +/* + * ECC error correction function + */ +static int bf54x_nand_correct_data_256(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ + struct bf54x_nand_info *info = mtd_to_nand_info(mtd); + u32 syndrome[5]; + u32 calced, stored; + int i; + unsigned short failing_bit, failing_byte; + u_char data; + + calced = calc_ecc[0] | (calc_ecc[1] << 8) | (calc_ecc[2] << 16); + stored = read_ecc[0] | (read_ecc[1] << 8) | (read_ecc[2] << 16); + + syndrome[0] = (calced ^ stored); + + /* + * syndrome 0: all zero + * No error in data + * No action + */ + if (!syndrome[0] || !calced || !stored) + return 0; + + /* + * sysdrome 0: only one bit is one + * ECC data was incorrect + * No action + */ + if (count_bits(syndrome[0]) == 1) { + dev_err(info->device, "ECC data was incorrect!\n"); + return 1; + } + + syndrome[1] = (calced & 0x7FF) ^ (stored & 0x7FF); + syndrome[2] = (calced & 0x7FF) ^ ((calced >> 11) & 0x7FF); + syndrome[3] = (stored & 0x7FF) ^ ((stored >> 11) & 0x7FF); + syndrome[4] = syndrome[2] ^ syndrome[3]; + + for (i = 0; i < 5; i++) + dev_info(info->device, "syndrome[%d] 0x%08x\n", i, syndrome[i]); + + dev_info(info->device, "calced[0x%08x], stored[0x%08x]\n", calced, stored); + + /* + * sysdrome 0: exactly 11 bits are one, each parity + * and parity' pair is 1 & 0 or 0 & 1. + * 1-bit correctable error + * Correct the error + */ + if (count_bits(syndrome[0]) == 11 && syndrome[4] == 0x7FF) { + dev_info(info->device, "1-bit correctable error, correct it.\n"); + dev_info(info->device, "syndrome[1] 0x%08x\n", syndrome[1]); + + failing_bit = syndrome[1] & 0x7; + failing_byte = syndrome[1] >> 0x3; + data = *(dat + failing_byte); + data = data ^ (0x1 << failing_bit); + *(dat + failing_byte) = data; + + return 0; + } + + /* + * sysdrome 0: random data + * More than 1-bit error, non-correctable error + * Discard data, mark bad block + */ + dev_err(info->device, + "More than 1-bit error, non-correctable error.\n"); + dev_err(info->device, + "Please discard data, mark bad block\n"); + + return 1; +} + +static int bf54x_nand_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ struct bf54x_nand_info *info = mtd_to_nand_info(mtd); + struct bf54x_nand_platform *plat = info->platform; + unsigned short page_size = (plat->page_size ? 512 : 256); + + int ret; + + ret = bf54x_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); + + /* If page size is 512, correct second 256 bytes */ + if (page_size == 512) { + dat += 256; + read_ecc += 8; + calc_ecc += 8; + ret = bf54x_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); + } + + return ret; +} + +static void bf54x_nand_enable_hwecc(struct mtd_info *mtd, int mode) +{ + /* + * This register must be written before each page is + * transferred to generate the correct ECC register + * values. + */ + return; + +} + +static int bf54x_nand_calculate_ecc(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_code) +{ + struct bf54x_nand_info *info = mtd_to_nand_info(mtd); + struct bf54x_nand_platform *plat = info->platform; + u16 page_size = (plat->page_size ? 512 : 256); + u16 ecc0, ecc1; + u32 code[2]; + u8 *p; + int bytes = 3, i; + + /* first 4 bytes ECC code for 256 page size */ + ecc0 = bfin_read_NFC_ECC0(); + ecc1 = bfin_read_NFC_ECC1(); + + code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11); + + dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]); + + /* second 4 bytes ECC code for 512 page size */ + if (page_size == 512) { + ecc0 = bfin_read_NFC_ECC2(); + ecc1 = bfin_read_NFC_ECC3(); + code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11); + bytes = 6; + dev_dbg(info->device, "returning ecc 0x%08x\n", code[1]); + } + + p = (u8 *)code; + for (i = 0; i < bytes; i++) + ecc_code[i] = p[i]; + + return 0; +} + +/*---------------------------------------------------------------------------- + * PIO mode for buffer writing and reading + */ +static void bf54x_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + unsigned short val; + + /* + * Data reads are requested by first writing to NFC_DATA_RD + * and then reading back from NFC_READ. + */ + for (i = 0; i < len; i++) { + while (bfin_read_NFC_STAT() & WB_FULL) + continue; + + /* Contents do not matter */ + bfin_write_NFC_DATA_RD(0x0000); + SSYNC(); + + while ((bfin_read_NFC_IRQSTAT() & RD_RDY) != RD_RDY) + continue; + + buf[i] = bfin_read_NFC_READ(); + + val = bfin_read_NFC_IRQSTAT(); + val |= RD_RDY; + bfin_write_NFC_IRQSTAT(val); + SSYNC(); + } +} + +static uint8_t bf54x_nand_read_byte(struct mtd_info *mtd) +{ + uint8_t val; + + bf54x_nand_read_buf(mtd, &val, 1); + + return val; +} + +static void bf54x_nand_write_buf(struct mtd_info *mtd, + const uint8_t *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) { + while (bfin_read_NFC_STAT() & WB_FULL) + continue; + + bfin_write_NFC_DATA_WR(buf[i]); + SSYNC(); + } +} + +static void bf54x_nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + u16 *p = (u16 *) buf; + len >>= 1; + + /* + * Data reads are requested by first writing to NFC_DATA_RD + * and then reading back from NFC_READ. + */ + bfin_write_NFC_DATA_RD(0x5555); + + SSYNC(); + + for (i = 0; i < len; i++) + p[i] = bfin_read_NFC_READ(); +} + +static void bf54x_nand_write_buf16(struct mtd_info *mtd, + const uint8_t *buf, int len) +{ + int i; + u16 *p = (u16 *) buf; + len >>= 1; + + for (i = 0; i < len; i++) + bfin_write_NFC_DATA_WR(p[i]); + + SSYNC(); +} + +/*---------------------------------------------------------------------------- + * DMA functions for buffer writing and reading + */ +static irqreturn_t bf54x_nand_dma_irq (int irq, void *dev_id) +{ + struct bf54x_nand_info *info = (struct bf54x_nand_info *) dev_id; + + clear_dma_irqstat(CH_NFC); + disable_dma(CH_NFC); + complete(&info->dma_completion); + + return IRQ_HANDLED; +} + +static int bf54x_nand_dma_rw(struct mtd_info *mtd, + uint8_t *buf, int is_read) +{ + struct bf54x_nand_info *info = mtd_to_nand_info(mtd); + struct bf54x_nand_platform *plat = info->platform; + unsigned short page_size = (plat->page_size ? 512 : 256); + unsigned short val; + + dev_dbg(info->device, " mtd->%p, buf->%p, len %d, is_read %d\n", + mtd, buf, is_read); + + if (is_read) + invalidate_dcache_range((unsigned int)buf, + (unsigned int)(buf + page_size)); + else + flush_dcache_range((unsigned int)buf, + (unsigned int)(buf + page_size)); + + bfin_write_NFC_RST(0x1); + SSYNC(); + + disable_dma(CH_NFC); + clear_dma_irqstat(CH_NFC); + + /* setup DMA register with Blackfin DMA API */ + set_dma_config(CH_NFC, 0x0); + set_dma_start_addr(CH_NFC, (unsigned long) buf); + set_dma_x_count(CH_NFC, (page_size >> 2)); + set_dma_x_modify(CH_NFC, 4); + + /* setup write or read operation */ + val = DI_EN | WDSIZE_32; + if (is_read) + val |= WNR; + set_dma_config(CH_NFC, val); + enable_dma(CH_NFC); + + /* Start PAGE read/write operation */ + if (is_read) + bfin_write_NFC_PGCTL(0x1); + else + bfin_write_NFC_PGCTL(0x2); + wait_for_completion(&info->dma_completion); + + return 0; +} + +static void bf54x_nand_dma_read_buf(struct mtd_info *mtd, + uint8_t *buf, int len) +{ + struct bf54x_nand_info *info = mtd_to_nand_info(mtd); + struct bf54x_nand_platform *plat = info->platform; + unsigned short page_size = (plat->page_size ? 512 : 256); + + dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len); + + if (len == page_size) + bf54x_nand_dma_rw(mtd, buf, 1); + else + bf54x_nand_read_buf(mtd, buf, len); +} + +static void bf54x_nand_dma_write_buf(struct mtd_info *mtd, + const uint8_t *buf, int len) +{ + struct bf54x_nand_info *info = mtd_to_nand_info(mtd); + struct bf54x_nand_platform *plat = info->platform; + unsigned short page_size = (plat->page_size ? 512 : 256); + + dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len); + + if (len == page_size) + bf54x_nand_dma_rw(mtd, (uint8_t *)buf, 0); + else + bf54x_nand_write_buf(mtd, buf, len); +} + +/*---------------------------------------------------------------------------- + * System initialization functions + */ + +static int bf54x_nand_dma_init(struct bf54x_nand_info *info) +{ + int ret; + unsigned short val; + + /* Do not use dma */ + if (!hardware_ecc) + return 0; + + init_completion(&info->dma_completion); + + /* Setup DMAC1 channel mux for NFC which shared with SDH */ + val = bfin_read_DMAC1_PERIMUX(); + val &= 0xFFFE; + bfin_write_DMAC1_PERIMUX(val); + SSYNC(); + + /* Request NFC DMA channel */ + ret = request_dma(CH_NFC, "BF54X NFC driver"); + if (ret < 0) { + dev_err(info->device, " unable to get DMA channel\n"); + return ret; + } + + set_dma_callback(CH_NFC, (void *) bf54x_nand_dma_irq, (void *) info); + + /* Turn off the DMA channel first */ + disable_dma(CH_NFC); + return 0; +} + +/* + * BF54X NFC hardware initialization + * - pin mux setup + * - clear interrupt status + */ +static int bf54x_nand_hw_init(struct bf54x_nand_info *info) +{ + int err = 0; + unsigned short val; + struct bf54x_nand_platform *plat = info->platform; + + if (!info) + return -EINVAL; + + /* setup NFC_CTL register */ + dev_info(info->device, + "page_size=%d, data_width=%d, wr_dly=%d, rd_dly=%d\n", + (plat->page_size ? 512 : 256), + (plat->data_width ? 16 : 8), + plat->wr_dly, plat->rd_dly); + + val = (plat->page_size << NFC_PG_SIZE_OFFSET) | + (plat->data_width << NFC_NWIDTH_OFFSET) | + (plat->rd_dly << NFC_RDDLY_OFFSET) | + (plat->rd_dly << NFC_WRDLY_OFFSET); + dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val); + + bfin_write_NFC_CTL(val); + SSYNC(); + + /* clear interrupt status */ + bfin_write_NFC_IRQMASK(0x0); + SSYNC(); + val = bfin_read_NFC_IRQSTAT(); + bfin_write_NFC_IRQSTAT(val); + SSYNC(); + + if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) { + printk(KERN_ERR DRV_NAME + ": Requesting Peripherals failed\n"); + return -EFAULT; + } + + + /* DMA initialization */ + if (bf54x_nand_dma_init(info)) { + err = -ENXIO; + } + + return err; +} + +/*---------------------------------------------------------------------------- + * Device management interface + */ +static int bf54x_nand_add_partition(struct bf54x_nand_info *info) +{ + struct mtd_info *mtd = &info->mtd; + +#ifdef CONFIG_MTD_PARTITIONS + struct mtd_partition *parts = info->platform->partitions; + int nr = info->platform->nr_partitions; + + return add_mtd_partitions(mtd, parts, nr); +#else + return add_mtd_device(mtd); +#endif +} + +static int bf54x_nand_remove(struct platform_device *pdev) +{ + struct bf54x_nand_info *info = to_nand_info(pdev); + struct mtd_info *mtd = NULL; + + platform_set_drvdata(pdev, NULL); + + if (!info) + return 0; + + /* first thing we need to do is release all our mtds + * and their partitions, then go through freeing the + * resources used + */ + mtd = &info->mtd; + if (mtd) { + nand_release(mtd); + kfree(mtd); + } + + peripheral_free_list(bfin_nfc_pin_req); + + /* free the common resources */ + kfree(info); + + return 0; +} + +/* + * bf54x_nand_probe + * + * called by device layer when it finds a device matching + * one our driver can handled. This code checks to see if + * it can allocate all necessary resources then calls the + * nand layer to look for devices + */ +static int bf54x_nand_probe(struct platform_device *pdev) +{ + struct bf54x_nand_platform *plat = to_nand_plat(pdev); + struct bf54x_nand_info *info = NULL; + struct nand_chip *chip = NULL; + struct mtd_info *mtd = NULL; + int err = 0; + + dev_dbg(&pdev->dev, "(%p)\n", pdev); + + if (!plat) { + dev_err(&pdev->dev, "no platform specific information\n"); + goto exit_error; + } + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (info == NULL) { + dev_err(&pdev->dev, "no memory for flash info\n"); + err = -ENOMEM; + goto exit_error; + } + + platform_set_drvdata(pdev, info); + + spin_lock_init(&info->controller.lock); + init_waitqueue_head(&info->controller.wq); + + info->device = &pdev->dev; + info->platform = plat; + + /* initialise chip data struct */ + chip = &info->chip; + + if (plat->data_width) + chip->options |= NAND_BUSWIDTH_16; + + chip->options |= NAND_CACHEPRG | NAND_SKIP_BBTSCAN; + + chip->read_buf = (plat->data_width) ? + bf54x_nand_read_buf16 : bf54x_nand_read_buf; + chip->write_buf = (plat->data_width) ? + bf54x_nand_write_buf16 : bf54x_nand_write_buf; + + chip->read_byte = bf54x_nand_read_byte; + + chip->cmd_ctrl = bf54x_nand_hwcontrol; + chip->dev_ready = bf54x_nand_devready; + + chip->priv = &info->mtd; + chip->controller = &info->controller; + + chip->IO_ADDR_R = (void __iomem *) NFC_READ; + chip->IO_ADDR_W = (void __iomem *) NFC_DATA_WR; + + chip->chip_delay = 0; + + /* initialise mtd info data struct */ + mtd = &info->mtd; + mtd->priv = chip; + mtd->owner = THIS_MODULE; + + /* initialise the hardware */ + err = bf54x_nand_hw_init(info); + if (err != 0) + goto exit_error; + + /* setup hardware ECC data struct */ + if (hardware_ecc) { + if (plat->page_size == NFC_PG_SIZE_256) { + chip->ecc.bytes = 3; + chip->ecc.size = 256; + } else if (mtd->writesize == NFC_PG_SIZE_512) { + chip->ecc.bytes = 6; + chip->ecc.size = 512; + } + + chip->read_buf = bf54x_nand_dma_read_buf; + chip->write_buf = bf54x_nand_dma_write_buf; + chip->ecc.calculate = bf54x_nand_calculate_ecc; + chip->ecc.correct = bf54x_nand_correct_data; + chip->ecc.mode = NAND_ECC_HW; + chip->ecc.hwctl = bf54x_nand_enable_hwecc; + } else { + chip->ecc.mode = NAND_ECC_SOFT; + } + + /* scan hardware nand chip and setup mtd info data struct */ + if (nand_scan(mtd, 1)) { + err = -ENXIO; + goto exit_error; + } + + /* add NAND partition */ + bf54x_nand_add_partition(info); + + dev_dbg(&pdev->dev, "initialised ok\n"); + return 0; + +exit_error: + bf54x_nand_remove(pdev); + + if (err == 0) + err = -EINVAL; + return err; +} + +/* PM Support */ +#ifdef CONFIG_PM + +static int bf54x_nand_suspend(struct platform_device *dev, pm_message_t pm) +{ + struct bf54x_nand_info *info = platform_get_drvdata(dev); + + return 0; +} + +static int bf54x_nand_resume(struct platform_device *dev) +{ + struct bf54x_nand_info *info = platform_get_drvdata(dev); + + if (info) + bf54x_nand_hw_init(info); + + return 0; +} + +#else +#define bf54x_nand_suspend NULL +#define bf54x_nand_resume NULL +#endif + +/* driver device registration */ +static struct platform_driver bf54x_nand_driver = { + .probe = bf54x_nand_probe, + .remove = bf54x_nand_remove, + .suspend = bf54x_nand_suspend, + .resume = bf54x_nand_resume, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init bf54x_nand_init(void) +{ + printk(KERN_INFO "%s, Version %s (c) 2007 Analog Devices, Inc.\n", + DRV_DESC, DRV_VERSION); + + return platform_driver_register(&bf54x_nand_driver); +} + +static void __exit bf54x_nand_exit(void) +{ + platform_driver_unregister(&bf54x_nand_driver); +} + +module_init(bf54x_nand_init); +module_exit(bf54x_nand_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR(DRV_AUTHOR); +MODULE_DESCRIPTION(DRV_DESC); diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h index fcc8b4c..14cb10c 100644 --- a/include/asm-blackfin/mach-bf548/dma.h +++ b/include/asm-blackfin/mach-bf548/dma.h @@ -55,6 +55,7 @@ #define CH_SPORT3_RX 20 #define CH_SPORT3_TX 21 #define CH_SDH 22 +#define CH_NFC 22 #define CH_SPI2 23 #define CH_MEM_STREAM0_DEST 24 diff --git a/include/asm-blackfin/mach-bf548/nand.h b/include/asm-blackfin/mach-bf548/nand.h new file mode 100644 index 0000000..a77fd46 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/nand.h @@ -0,0 +1,47 @@ +/* linux/include/asm-blackfin/mach-bf548/nand.h + * + * Copyright (c) 2007 Analog Devices, Inc. + * Bryan Wu + * + * BF54X - NAND flash controller platfrom_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* struct bf54x_nand_platform + * + * define a interface between platfrom board specific code and + * bf54x NFC driver. + * + * nr_partitions = number of partitions pointed to be partitoons (or zero) + * partitions = mtd partition list + */ + +#define NFC_PG_SIZE_256 0 +#define NFC_PG_SIZE_512 1 +#define NFC_PG_SIZE_OFFSET 9 + +#define NFC_NWIDTH_8 0 +#define NFC_NWIDTH_16 1 +#define NFC_NWIDTH_OFFSET 8 + +#define NFC_RDDLY_OFFSET 4 +#define NFC_WRDLY_OFFSET 0 + +#define NFC_STAT_NBUSY 1 + +struct bf54x_nand_platform { + /* NAND chip information */ + unsigned short page_size; + unsigned short data_width; + + /* RD/WR strobe delay timing information, all times in SCLK cycles */ + unsigned short rd_dly; + unsigned short wr_dly; + + /* NAND MTD partition information */ + int nr_partitions; + struct mtd_partition *partitions; +}; -- 1.5.2 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/