From:   =?UTF-8?q?Cl=C3=A9ment=20L=C3=A9ger?= <clement.leger@bootlin.com>
To:     Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>
Cc:     =?UTF-8?q?Cl=C3=A9ment=20L=C3=A9ger?= <clement.leger@bootlin.com>,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
        Herve Codina <herve.codina@bootlin.com>,
        =?UTF-8?q?Miqu=C3=A8l=20Raynal?= <miquel.raynal@bootlin.com>,
        Milan Stevanovic <milan.stevanovic@se.com>,
        Jimmy Lalande <jimmy.lalande@se.com>,
        Pascal Eberhard <pascal.eberhard@se.com>,
        Arun Ramadoss <Arun.Ramadoss@microchip.com>,
        linux-renesas-soc@vger.kernel.org, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH 0/3] net: dsa: rzn1-a5psw: add supoport for vlan and .port_bridge_flags
Date:   Wed,  8 Feb 2023 17:04:50 +0100
Message-Id: <20230208160453.325783-1-clement.leger@bootlin.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

While adding support for VLAN, bridge_vlan_unaware.sh and
bridge_vlan_aware.sh were executed and requires .port_bridge_flags
to disable flooding on some specific port. Thus, this series adds
both vlan support and .port_bridge_flags.

----
V2:
 - Fixed a few formatting errors
 - Add .port_bridge_flags implementation

Clément Léger (3):
  net: dsa: rzn1-a5psw: use a5psw_reg_rmw() to modify flooding
    resolution
  net: dsa: rzn1-a5psw: add support for .port_bridge_flags
  net: dsa: rzn1-a5psw: add vlan support

 drivers/net/dsa/rzn1_a5psw.c | 224 ++++++++++++++++++++++++++++++++++-
 drivers/net/dsa/rzn1_a5psw.h |   8 +-
 2 files changed, 223 insertions(+), 9 deletions(-)

-- 
2.39.0